The short answer: mensuration questions are mostly about choosing the right formula and keeping units consistent. Learn the formulas below, then practise reading the shape from the words of the question.
2D shapes
| Shape | Area | Perimeter |
|---|---|---|
| Square (side a) | a² | 4a |
| Rectangle (l, b) | l × b | 2(l + b) |
| Triangle (base b, height h) | ½ × b × h | Sum of sides |
| Circle (radius r) | πr² | 2πr |
| Parallelogram | base × height | 2(sum of adjacent sides) |
| Trapezium | ½ × (a + b) × h | Sum of sides |
Example 1. A circle has radius 7 cm. Using π = 22/7: area = 22/7 × 49 = 154 cm², circumference = 2 × 22/7 × 7 = 44 cm.
3D shapes
| Solid | Volume | Surface area |
|---|---|---|
| Cube (side a) | a³ | 6a² |
| Cuboid (l, b, h) | l × b × h | 2(lb + bh + hl) |
| Cylinder (r, h) | πr²h | Curved 2πrh, total 2πr(r + h) |
| Cone (r, h, slant l) | ⅓πr²h | Curved πrl, total πr(r + l) |
| Sphere (r) | 4/3 πr³ | 4πr² |
The slant height of a cone is l = √(r² + h²).
Example 2. A cube has a side of 5 cm. Volume = 125 cm³. Total surface area = 6 × 25 = 150 cm².
Example 3. A cylinder has r = 7 cm and h = 10 cm. Curved surface = 2 × 22/7 × 7 × 10 = 440 cm². Volume = 22/7 × 49 × 10 = 1,540 cm³.
Example 4. A cone has r = 7 cm and h = 24 cm. Slant height = √(49 + 576) = √625 = 25 cm. Curved surface = 22/7 × 7 × 25 = 550 cm². Volume = ⅓ × 22/7 × 49 × 24 = 1,232 cm³.
Example 5. A sphere has r = 7 cm. Volume = 4/3 × 22/7 × 343 = 4,312/3 ≈ 1,437.33 cm³.
Unit conversions
- 1 m = 100 cm, so 1 m² = 10,000 cm² and 1 m³ = 1,000,000 cm³.
- 1 litre = 1,000 cm³ (1,000 millilitres).
- 1 hectare = 10,000 m².
Melting and recasting
When a solid is melted and recast, the volume stays the same. Equate the volumes to find the new dimension.
Mistakes
- Using diameter where the radius belongs.
- Mixing cm and m in one calculation.
- Using area formulas for volume questions.
- Forgetting that a closed cylinder has two circular ends in its total surface area.
Course · Beginner · Free
Quantitative Aptitude — Mensuration: Foundation
Foundation course on Mensuration (Quantitative Aptitude): the basics, explained from the start.
Test your mensuration speed.
Take a practice testFrequently asked questions
What is the difference between area and volume?
Area measures a flat surface in square units. Volume measures the space inside a solid in cubic units.
Which value of pi should I use?
Use the value the question gives. If it gives none, 22/7 is common when the radius is a multiple of 7, and 3.14 otherwise.
How do I find the slant height of a cone?
Use l = √(r² + h²).
How many cm³ make a litre?
1,000 cm³ make 1 litre.
Is the volume conserved when a solid is melted?
Yes, ignoring any loss, so equate the volume before and after.