The short answer: when two ingredients of different price or strength are mixed, the ratio in which they must be mixed to get a given mean is the inverse of how far each is from the mean. This is called alligation, and it avoids long equations.

The cross method

Write the cheaper price on the left, the dearer on the right, and the mean in the middle. Subtract diagonally, always bigger minus smaller. The two answers give the ratio of cheaper to dearer quantity.

Example 1. In what ratio should sugar at ₹40/kg be mixed with sugar at ₹50/kg to get a mixture worth ₹44/kg? Cheaper quantity gets the difference (50 − 44) = 6, and dearer gets (44 − 40) = 4. The ratio cheaper : dearer is 6 : 4 = 3 : 2. Check: 3 kg at ₹40 + 2 kg at ₹50 = ₹220 for 5 kg = ₹44/kg.

Mixing by strength

Example 2. How much water must be added to 20 litres of a 40% milk solution to make it 25% milk? Water is 0% milk. Cross method between 0% and 40% for a mean of 25%: water : solution = (40 − 25) : (25 − 0) = 15 : 25 = 3 : 5. For 20 litres of solution, water = 20 × 3/5 = 12 litres. Check: milk is 8 litres in 32 litres, which is 25%.

Replacement: removing and refilling

A vessel holds quantity V of pure liquid. A quantity R is removed and replaced with water, and this is done n times. The pure liquid left is V × (1 − R/V)^n.

Example 3. A vessel has 40 litres of milk. Four litres are removed and replaced with water; this is repeated once more. Milk left = 40 × (1 − 4/40)² = 40 × 0.9 × 0.9 = 32.4 litres.

Mean price with quantities

Example 4. 5 kg of rice at ₹30 is mixed with 3 kg at ₹50. Mean price = (5 × 30 + 3 × 50)/8 = 300/8 = ₹37.50 per kg.

Mistakes

  • Putting the differences on the wrong sides in the cross method. Check by substituting the ratio back.
  • Using the mixture's total quantity as one of the ingredient quantities.
  • Mixing percentages of different totals directly instead of working with actual quantities.
  • Using the replacement formula when the removed quantity is not the same each time.

Course · Beginner · Free

Quantitative Aptitude — Mixtures and Alligation: Foundation

Foundation course on Mixtures and Alligation (Quantitative Aptitude): the basics, explained from the start.

Practise mixture questions.

Take a practice test

Frequently asked questions

What is alligation?

A rule for finding the ratio in which two ingredients of different price or strength are mixed to give a required mean.

How do I use the cross method?

Write the two values with the mean between them, subtract diagonally (larger minus smaller) and read the two results as the ratio.

What is the replacement formula?

Pure liquid left = V × (1 − R/V)^n, where V is the vessel's content, R the amount replaced each time and n the number of times.

Is water treated as zero percent?

Yes. Pure water has 0% of the ingredient, so it sits at zero in the cross method.

Can alligation be used for speeds?

Yes, it works for any quantity that averages in proportion, including average speed for equal times, though not for equal distances.