Revision notes

Loans and Advances: Practice

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Working-capital finance: drawing power and interest on balances

Drawing power = value of security × (100 − margin%) ÷ 100. Available to draw = the lower of drawing power and the sanctioned limit, minus what is already drawn.

Telling the facilities apart
FacilityWhat distinguishes itCommon confusion
Cash creditRunning limit against stock or receivables, usually hypothecated or pledgedMistaken for a term loan because it may run for a year or more
OverdraftDrawing beyond the balance in a current account up to a limit; may be against security such as deposits, or a short temporary facilityMistaken for cash credit; the key is that it runs on a current account
Demand loanA loan repayable whenever the bank demands, usually disbursed in one sumMistaken for a term loan, which has a fixed repayment schedule
Bill discountingFinance against a trade bill; the bank recovers from the bill's payer when it falls dueMistaken for an unsecured loan; the bill itself supports it

Key takeaways: a borrower draws up to the lower of drawing power and sanctioned limit; drawing power is security value less margin; interest on running accounts uses daily products; check an answer against the average-balance estimate; and remember that running facilities can be redrawn while term loans cannot.

Read the full lesson

Lesson 2

Securities and charges: the questions behind the definitions

Ask two questions: movable or immovable? who holds it? Then add: is it a claim to money (assignment), a combining of accounts (set-off), or a right to keep what is already held (lien)?

Key takeaways: assignment transfers a claim to money; set-off combines accounts in the same capacity; a banker's lien is general but excludes items given for a specific purpose; equitable mortgage uses deposit of title deeds; apply each security's own margin; and restore a margin either by repaying the shortfall or by adding shortfall ÷ (lending share) of new security.

Read the full lesson

Lesson 3

EMI questions: formula, speed checks and tenure comparisons

EMI = P × r × (1 + r)ⁿ ÷ [(1 + r)ⁿ − 1]; r = monthly rate as a decimal, n = months. Total interest = EMI × n − P.

P ÷ n + (P × r) ÷ 2 < EMI < P ÷ n + P × r

Key takeaways: compute in three steps, keeping decimals in the divisor; bracket the EMI between P/n + Pr/2 and P/n + Pr to eliminate options; EMI scales with principal; and a longer tenure lowers the EMI by less than the tenure ratio while raising total interest.

Read the full lesson

Lesson 4

Loan schedules: outstanding balance and prepayment

First three months of the schedule
MonthOpening balance (₹)Interest (₹)Principal (₹)Closing balance (₹)
11,00,000.001,000.007,884.8892,115.12
292,115.12921.157,963.7384,151.39
384,151.39841.518,043.3776,108.02

Balance after k EMIs = P(1 + r)ᵏ − EMI × [(1 + r)ᵏ − 1] ÷ r

Key takeaways: build schedules row by row with interest on the opening balance; use the balance formula for a jump of several months; expect more than half the principal to remain at the half-way point; and after a prepayment, a shorter tenure saves more interest than a smaller EMI.

Read the full lesson

Lesson 5

Credit appraisal in practice: limits, capacity and priority sectors

Loan offered = the lower of (security value × lending share) and (allowed EMI ÷ EMI per rupee of loan).

Key takeaways: a secured loan is limited by both security and income, and the bank lends the lower; margin money is the borrower's share of the price; read appraisal scenarios by asking which C is weak; and priority sector lending steers a share of bank credit to chosen sectors while appraisal and interest still apply.

Read the full lesson

Lesson 6

Affordability problems: income, fixed obligations and the maximum loan

Loan = the lower of (income-based loan) and (LTV x value). Income-based loan = (share x income - existing EMIs) / EMI per lakh x 1,00,000.

Key takeaways. Two limits, one loan: the lower wins. Income sets the maximum EMI; the EMI per lakh converts it into a loan; the LTV applies to the property value. A co-borrower raises income and so only the first limit.

Read the full lesson

Lesson 7

Repayment structures compared: equal principal, EMI and bullet

Three ways to repay
StructureHow it worksInterest over the loan
Equal principalThe same amount of principal each month plus interest on the balance. The instalment falls over timeLowest of the three
Equal monthly instalment (EMI)The same total payment each month; the share of principal rises over timeA little more than equal principal
BulletOnly interest is paid during the loan; the whole principal is repaid at the endHighest

Faster fall of principal means less interest. Equal principal < EMI < bullet in total interest, and the EMI is the easiest to budget.

Key takeaways. Total interest depends on how quickly principal falls. Equal principal costs least, EMI slightly more and bullet most. The first equal-principal instalment is the largest. EMIs give steady payments, and bullet loans carry the risk of a large payment at the end.

Read the full lesson

Lesson 8

Floating rates: benchmark plus spread and what a change does

Floating rate = benchmark + spread. Spread stays; the benchmark moves at reset dates. A rise raises either the EMI or the tenure.

Key takeaways. A floating rate follows a benchmark; the spread is the bank's own margin. A fixed rate protects against a rise but is usually set higher at the start. A rise in the rate raises the EMI or lengthens the tenure; the effect is larger on bigger balances.

Read the full lesson

Lesson 9

Mixed drill: naming the facility, the charge and the loan

Signal table
Signal in the questionLikely answer
Borrower draws and repays again within a limit; interest on the amount usedCash credit or overdraft
Fixed sum for a machine or house, repaid in instalmentsTerm loan
Asset stays with the borrower; the bank has a charge on itHypothecation
Movable goods are handed over to the bankPledge
Immovable property is the securityMortgage
Buyer's accepted bill is paid for before it is dueBill discounting
Bank promises to pay a third party if the customer failsGuarantee (non-fund-based)
Instalment is the same each month, with interest on the balanceEMI on reducing balance
Interest charged on the original sum for the whole periodFlat or simple interest
Bank lends a share of the asset's valueMargin / loan-to-value

Underline the signals, match them to the facility, charge or loan, then eliminate. Who holds the asset? Movable or immovable? Funded or not?

Key takeaways. A few signals identify most answers. Check who holds the asset, whether it is movable or immovable, whether money is lent or only promised, and whether the facility is running or fixed. Always compute the drawing power before deciding how much can be drawn.

Read the full lesson

Privacy · Terms · Refunds · Delivery