Revision notes

Chapter 11 Areas Related to Circles: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Circles, sectors and segments: the parts and their names

Sector or segment?

  • Sector
    • Bounded by two radii and an arc
    • Has a corner at the centre
    • Shape of a pizza slice
    • Angle at the centre is the angle of the sector
  • Segment
    • Bounded by a chord and an arc
    • Does not reach the centre (unless the chord is a diameter)
    • Shape of a slice of bread cut from a round loaf
    • Area = sector minus a triangle

Parts of a circular region

  • Sectors
    • Minor sector: angle θ
    • Major sector: angle 360° − θ
    • Semicircle: 180°
    • Quadrant: 90°
  • Segments
    • Minor segment: cut off by a chord, the smaller piece
    • Major segment: the larger piece
    • A diameter cuts two equal segments, the semicircles
Sectors as fractions
PartBounded byAngle at centreFraction of circle
QuadrantTwo perpendicular radii and an arc90°1/4
SemicircleA diameter and an arc180°1/2
Minor sector of 60°Two radii and an arc60°1/6
Major sector for a 60° minor sectorTwo radii and the major arc300°5/6

Circumference = 2πr and area = πr². A sector of angle θ is the fraction θ/360 of the whole circle, and the major sector has angle 360° − θ.

Key takeaways: use 2πr for the circumference and πr² for the area, with π = 22/7 unless told otherwise. A sector is bounded by two radii and an arc; a segment by a chord and an arc. Each comes in a minor and a major version. A quadrant is a 90° sector and a semicircle a 180° sector. A sector of angle θ is θ/360 of the circle.

Read the full lesson

Lesson 2

Length of an arc and perimeter of a sector

Length of an arc of angle θ (in degrees) of a circle of radius r: l = (θ/360) × 2πr. Perimeter of a sector = 2r + l.

Finding an arc length

  1. Read r and θ Check that θ is the angle at the centre, in degrees.
  2. Find the fraction θ/360, simplified, for example 120/360 = 1/3.
  3. Find the circumference 2πr with the given value of π.
  4. Multiply Arc = fraction × circumference.
  5. Add the radii if needed Perimeter of the sector = 2r + arc.
Common angles as fractions
Angle θFraction θ/360Arc if 2πr = 132 cm (r = 21 cm)
30°1/1211 cm
45°1/816.5 cm
60°1/622 cm
90°1/433 cm
120°1/344 cm
180°1/266 cm

Key takeaways: arc length = (θ/360) × 2πr, the same fraction of the circumference as the angle is of 360°. The perimeter of a sector is the arc plus two radii; the perimeter of a segment is the arc plus the chord. A minute hand turns 6° per minute. To work backwards, set up (θ/360) × 2πr = given length and solve for θ or r. Always give the unit of length.

Read the full lesson

Lesson 3

Area of a sector

Area of a sector of angle θ = (θ/360) × πr². Area of the major sector = πr² − area of the minor sector. Also, area of a sector = ½ × arc length × r.

Arc length or sector area?

  • Arc length
    • A length along the curve
    • (θ/360) × 2πr
    • Measured in cm or m
    • Used for a fence, wire or edge
  • Sector area
    • A region inside the circle
    • (θ/360) × πr²
    • Measured in cm² or m²
    • Used for painting, watering, cleaning or cost per unit area
Sector areas for one circle
Angle θFractionArea of sector when r = 14 cm (πr² = 616 cm²)
30°1/1251.33 cm²
45°1/877 cm²
60°1/6102.67 cm²
90°1/4154 cm²
120°1/3205.33 cm²
180°1/2308 cm²

Key takeaways: the area of a sector of angle θ is (θ/360) × πr²; the major sector is the circle minus the minor sector. If the arc length l is known, area = ½ × l × r. Areas are in square units. Equal slices of a circle cut into n pieces each have angle 360°/n. Doubling the radius makes the area four times as large.

Read the full lesson

Lesson 4

Area of a segment

Area of minor segment = area of sector OAB − area of triangle OAB = (θ/360) × πr² − area of triangle OAB. Area of major segment = πr² − area of minor segment.

Steps for a segment

  1. Find the sector (θ/360) × πr².
  2. Find the triangle OAB Use the special shape for θ = 60°, 90° or 120°.
  3. Subtract Minor segment = sector − triangle.
  4. Major segment if asked Whole circle − minor segment.
Triangle areas you need
Angle θShape of triangle OABArea of triangle OAB
60°Equilateral, side r(√3/4) r²
90°Right isosceles, legs rr²/2
120°Isosceles, base √3 r, height r/2(√3/4) r²

Key takeaways: a minor segment is a sector with the triangle OAB removed. For 90°, the triangle is r²/2; for 60° and 120°, it is (√3/4) r². The major segment is the whole circle minus the minor segment. Keep two decimal places until the last step, use the values of π and √3 the question gives, and state the answer as approximate when decimals were used.

Read the full lesson

Lesson 5

Real-life problems with sectors and segments

Solving a circle word problem

  1. Draw a sketch Mark the centre, the radius and the edges of the region.
  2. Name the shape Sector, segment, semicircle or quadrant?
  3. Find r and θ A rope, a blade, a hand or a radius gives r; corners and equal parts give θ.
  4. Choose the formula Arc length for a length, sector or segment area for an area.
  5. Finish and check Multiply by a rate if asked; write units.

Where the angle comes from

  • Corners of fields
    • Rectangle or square corner: 90°
    • Equilateral triangle corner: 60°
  • Equal parts
    • n equal sectors: 360° ÷ n each
    • n equal parts of a semicircle: 180° ÷ n each
  • Turning objects
    • Minute hand: 6° per minute
    • Sprinklers, wipers, beams: the angle turned
Spotting r and θ
Real objectShaperθ
Animal tied at a field's cornerSectorRope lengthAngle of the corner
Wiper blade or fan blade sweepingSector (or part of one)Blade lengthAngle swept
Cake or pizza in n equal piecesSectorRadius of cake360° ÷ n
Design cut off by a chordSegmentRadius of circleAngle the chord makes at the centre
Tip of a clock handArc (length)Hand length6° per minute for the minute hand

Turn every real object into a sector, segment or arc: name its radius r and angle θ, then use (θ/360) × πr² for an area or (θ/360) × 2πr for a length.

Key takeaways: read r from the rope, blade, hand or radius, and θ from a corner, an equal division or the angle turned. A rectangle's corner gives a quadrant, an equilateral triangle's corner a 60° sector, and n equal pieces give 360°/n each. A wire design is circumference plus the straight pieces. For cost, find the area first and then multiply by the rate.

Read the full lesson

Privacy · Terms · Refunds · Delivery