Revision notes

Chapter 3 Pair of Linear Equations in Two Variables: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Forming a pair of linear equations from a situation

From words to a pair of equations

  1. Read and spot the two unknowns What exactly are you asked to find?
  2. Name them Let x = …, y = …, with units.
  3. Translate condition 1 Write the first equation.
  4. Translate condition 2 Write the second equation.
  5. Tidy and check Bring to general form; test with any known values.
Translating words into equations
PhraseEquation (x, y as named)
The sum of two numbers is 40x + y = 40
x is 5 more than twice yx = 2y + 5
The perimeter of a rectangle (length x, breadth y) is 54 m2(x + y) = 54
3 kg rice at ₹x and 2 kg dal at ₹y cost ₹4203x + 2y = 420

Consistent: at least one solution. Inconsistent: no solution. Dependent: infinitely many solutions (and so also consistent).

— Words to remember

Key takeaways: name the two unknowns clearly, translate each condition into one equation, and write the pair in general form. A solution must satisfy both equations. Pairs are consistent (a solution exists), inconsistent (none) or dependent (infinitely many).

Read the full lesson

Lesson 2

Solving a pair of linear equations graphically

Points on x + y = 7
x037
y = 7 − x740
Points on x − y = 1
x014
y = x − 1−103

What the two lines can do

  • Intersecting lines
    • Meet at exactly one point
    • Unique solution
    • Pair is consistent
  • Parallel lines
    • Never meet
    • No solution
    • Pair is inconsistent
  • Coincident lines
    • Lie on top of each other
    • Infinitely many solutions
    • Pair is dependent (consistent)

The solution of a pair of linear equations is the point common to both lines: one point if they intersect, none if they are parallel, every point if they coincide.

— Graphical method

Key takeaways: draw each line from a small table of values, then read the meeting point and check it in both equations. Intersecting lines give a unique solution, parallel lines give none, and coincident lines give infinitely many. Where a line meets an axis, one coordinate is 0.

Read the full lesson

Lesson 3

Comparing the ratios of coefficients

The ratio test
Compare the ratiosLines areNumber of solutionsPair is
a₁/a₂ ≠ b₁/b₂IntersectingExactly oneConsistent
a₁/a₂ = b₁/b₂ = c₁/c₂CoincidentInfinitely manyDependent (consistent)
a₁/a₂ = b₁/b₂ ≠ c₁/c₂ParallelNoneInconsistent

a₁/a₂ ≠ b₁/b₂: unique solution. a₁/a₂ = b₁/b₂ = c₁/c₂: infinitely many. a₁/a₂ = b₁/b₂ ≠ c₁/c₂: no solution.

— Ratio test for a pair of linear equations

Using the ratio test

  1. Write in general form Move every term to one side so the equation equals 0.
  2. Compare a₁/a₂ and b₁/b₂ If they differ, stop: unique solution.
  3. If equal, compare c₁/c₂ Equal again: coincident. Different: parallel.

Key takeaways: put both equations in general form, then compare a₁/a₂ with b₁/b₂. Different ratios mean intersecting lines and a unique solution. If they are equal, compare c₁/c₂: equal again means coincident lines (infinitely many solutions), different means parallel lines (no solution). The same conditions let you find an unknown coefficient.

Read the full lesson

Lesson 4

Solving by the substitution method

The substitution method

  1. Make a variable the subject From the simpler equation, write y in terms of x (or x in terms of y).
  2. Substitute Put that expression into the OTHER equation.
  3. Solve Now there is only one variable; solve for it.
  4. Back-substitute Use the value to find the other variable.
  5. Check Put both values into both original equations.
You end withMeaningLines are
A value, such as x = 3Unique solutionIntersecting
A false statement, such as 6 = 9No solutionParallel
An always-true statement, such as 3 = 3Infinitely many solutionsCoincident

Substitution: make one variable the subject of one equation, substitute into the other, solve, back-substitute, and check in both.

— Substitution method

Key takeaways: substitution turns a pair into a single equation in one variable. A numerical value means a unique solution; a false statement means no solution; an always-true statement means infinitely many solutions. Always check the answer in both original equations.

Read the full lesson

Lesson 5

Solving by the elimination method and choosing a method

The elimination method

  1. Choose a variable to remove Pick the one whose coefficients are easiest to match.
  2. Multiply to match coefficients Make them equal (then subtract) or opposite (then add).
  3. Add or subtract That variable disappears, leaving one equation in one variable.
  4. Solve and back-substitute Find one value, then the other.
  5. Check In both original equations.

Elimination: multiply to make the coefficients of one variable equal or opposite, then subtract or add to remove it. 0 = non-zero means no solution; 0 = 0 means infinitely many.

— Elimination method

Choosing a method

  • Graphical
    • Shows the kind of solution at a glance
    • Good when answers are whole numbers
    • Hard to read fractions accurately
  • Substitution
    • Best when a coefficient is 1 or −1
    • Natural for 'y = …' conditions
    • Can create fractions otherwise
  • Elimination
    • Best when coefficients are larger numbers
    • Avoids fractions until the end
    • Add and subtract for swapped coefficients

Key takeaways: in elimination, scale the equations so that one variable has equal or opposite coefficients, then subtract or add. Swapped coefficients invite adding and subtracting the whole equations. If both variables vanish, 0 = non-zero means no solution and 0 = 0 means infinitely many. Pick the method that fits the coefficients.

Read the full lesson

Privacy · Terms · Refunds · Delivery