Revision notes

Chapter 4 Distribution of Oceans and Continents: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Wegener's continental drift theory

Break-up of Pangaea (Wegener)

  • Laurasia Northern component
    • Later broke into smaller northern continents
  • Gondwanaland Southern component
    • Later broke into smaller southern continents
Pangaea, surrounded by Panthalassa, began to split about 200 million years ago.

Wegener's sequence

  1. Pangaea and Panthalassa One supercontinent (all earth) in one mega-ocean (all water).
  2. About 200 million years ago Pangaea begins to split.
  3. Laurasia and Gondwanaland Northern and southern continental masses.
  4. Present continents Further break-up gives today's continents.

Wegener (1912): all continents once formed Pangaea (all earth) in the ocean Panthalassa (all water); about 200 million years ago Pangaea split into Laurasia (north) and Gondwanaland (south), which broke into today's continents.

Wegener's proposed forces
ForceCauseVerdict of most scholars
Pole-fleeing forceRotation of the earth (linked to the equatorial bulge)Totally inadequate
Tidal forceAttraction of the moon and the sunTotally inadequate

Key takeaways: the matching Atlantic coastlines led Ortelius (1596) and Pellegrini to imagine joined continents. Alfred Wegener, a German meteorologist, gave the continental drift theory in 1912: Pangaea in Panthalassa began to split about 200 million years ago into Laurasia and Gondwanaland and then into today's continents. Wegener's forces, the pole-fleeing force (rotation) and the tidal force (moon and sun), were considered totally inadequate by most scholars.

Read the full lesson

Lesson 2

Evidence in support of continental drift

Evidence for continental drift

  • Matching of continents Jig-saw fit of facing coasts
  • Rocks of same age across oceans Radiometric dating matches rock belts
  • Tillite Glacial deposits of the Gondwana system
  • Placer deposits Gold in Ghana from source rocks in Brazil
  • Distribution of fossils Lemurs, Mesosaurus
Summary of the evidence
EvidencePlaces involvedWhat it shows
Jig-saw fitAfrica and South AmericaCoasts fit at the 1,000-fathom line (Bullard, 1964)
Same-age rocksBrazil coast and western Africa2,000-million-year rock belts match; marine deposits only from the Jurassic
TilliteIndia, Africa, Falkland Islands, Madagascar, Antarctica, AustraliaShared glaciation and similar histories
Placer goldGhana coast and Brazil plateauGold came from Brazil when the continents were together
FossilsLemurs: India, Madagascar, Africa; Mesosaurus: South Africa and BrazilLand and freshwater species crossed what are now oceans

Five lines of evidence: jig-saw fit, rocks of the same age, tillite, placer gold and fossils. Each makes most sense if the southern continents were once joined.

Key takeaways: the facing coasts of Africa and South America fit almost perfectly at the 1,000-fathom line (Bullard, 1964). Radiometric dating matches 2,000-million-year rocks of Brazil and western Africa, and marine deposits between them date only from the Jurassic. Tillite of the Gondwana system links India with five other southern landmasses. Ghana's placer gold came from Brazil. Lemurs (India, Madagascar, Africa) and Mesosaurus (South Africa and Brazil, 4,800 km apart) show species spread across what are now oceans.

Read the full lesson

Lesson 3

Post-drift studies: convection currents, the ocean floor and sea floor spreading

A convection current in the mantle

  1. Heating Radioactive elements create heat differences in the mantle.
  2. Rising Heated material rises towards the surface.
  3. Spreading and cooling It spreads out beneath the plates and cools.
  4. Sinking Cooler material sinks back into the deeper mantle.

Then back to step 1: Heating

Divisions of the ocean floor (by depth and relief)

  • Continental margins Transition from continental shores to deep-sea basins
    • Continental shelf
    • Continental slope
    • Continental rise
    • Deep oceanic trenches (of special interest here)
  • Deep-sea basins (abyssal plains) Extensive plains between continental margins and ridges
    • Where continental sediments carried beyond the margins are deposited
  • Mid-oceanic ridges Interconnected underwater mountain chain, the longest on the earth's surface
    • Central rift system at the crest: intense volcanic activity
    • Fractionated plateau
    • Flank zone

Two kinds of earthquake belts

  • Mid-oceanic ridges
    • Line through the central Atlantic into the Indian Ocean
    • Shallow earthquake foci
    • Frequent volcanic eruptions at the crest
  • Alpine-Himalayan belt and Pacific rim
    • Mountain systems and ocean edges
    • Deep-seated earthquakes
    • Pacific rim: the rim of fire

Sea floor spreading (Hess, 1961)

  1. Eruption at the ridge crest Lava rises and ruptures the oceanic crust.
  2. New crust wedges in Fresh lava pushes older crust to either side.
  3. Floor spreads Crust moves away from the crest, ageing as it goes.
  4. Sinking at trenches Older crust sinks at oceanic trenches and is consumed.

Sea floor spreading: new oceanic crust forms at mid-oceanic ridges and is pushed outward; old crust sinks and is consumed at trenches. So ocean crust is never older than about 200 million years.

Key takeaways: Holmes (1930s) proposed mantle convection currents driven by radioactive heat, addressing drift's missing force. Post-war ocean mapping found ridges, trenches and young ocean crust. The ocean floor has continental margins, abyssal plains and mid-oceanic ridges. Earthquakes are shallow along ridges and deep along the Alpine-Himalayan belt and the Pacific rim (the rim of fire). Matching rocks on both sides of ridges, ocean crust under 200 million years old, thin sediments and trench earthquakes led Hess (1961) to propose sea floor spreading, with crust consumed at trenches.

Read the full lesson

Lesson 4

Plate tectonics: plates, boundaries, rates and forces

Plates of the world (textbook list)

  • Seven major plates
    • Antarctica and the surrounding oceanic plate
    • North American plate
    • South American plate
    • Pacific plate
    • India-Australia-New Zealand plate
    • Africa with the eastern Atlantic floor plate
    • Eurasia and the adjacent oceanic plate
  • Important minor plates
    • Cocos: between Central America and the Pacific plate
    • Nazca: between South America and the Pacific plate
    • Arabian: mostly the Saudi Arabian landmass
    • Philippine: between the Asiatic and Pacific plates
    • Caroline: between the Philippine and Indian plates, north of New Guinea

Continental drift versus plate tectonics

  • Continental drift (Wegener, 1912)
    • Continents move through the ocean floor
    • All continents began as Pangaea
    • Forces: pole-fleeing and tidal, found inadequate
    • Evidence mostly from continents
  • Plate tectonics (1967)
    • Plates move; continents ride on them
    • Continents always wandered; Pangaea formed by convergence
    • Force: mantle convection driven by internal heat
    • Evidence also from the ocean floor and palaeomagnetism
Plate boundaries
BoundaryWhat happens to crustKey features and example
DivergentNew crust is generated as plates pull apartSpreading sites; Mid-Atlantic Ridge, where the American plate(s) separate from the Eurasian and African plates
ConvergentCrust is destroyed as one plate dives under anotherSubduction zone; ocean-continent, ocean-ocean or continent-continent convergence
TransformCrust is neither produced nor destroyedPlates slide horizontally past each other along transform faults, generally perpendicular to mid-oceanic ridges

Types of convergence

  • Oceanic and continental plate
  • Two oceanic plates
  • Two continental plates

Plates are rigid slabs of lithosphere moving over the asthenosphere. Divergent boundaries make crust, convergent boundaries destroy it, transform boundaries neither make nor destroy it. Mantle convection, powered by radioactive decay and residual heat, drives them.

Key takeaways: plate tectonics (1967: McKenzie and Parker, and Morgan) treats the lithosphere as seven major and several minor rigid plates moving over the asthenosphere; plates, not continents alone, move. Divergent boundaries create crust (Mid-Atlantic Ridge), convergent ones destroy it at subduction zones, and transform boundaries do neither. Magnetic strips give rates from under 2.5 cm/yr (Arctic Ridge) to over 15 cm/yr (East Pacific Rise). Mantle convection, powered by radioactive decay and residual heat, drives the plates.

Read the full lesson

Lesson 5

Movement of the Indian plate and the rise of the Himalayas

Boundaries of the Indian plate
BoundaryDescription (from the textbook)Type
NorthernSubduction zone along the HimalayasContinent-continent convergence
Eastern side towards MyanmarExtends through the Arakan Yoma mountains of Myanmar towards the island arc along the Java TrenchConvergent
Eastern marginA spreading site east of Australia, an oceanic ridge in the south-west PacificDivergent
WesternFollows the Kirthar mountains of Pakistan, then along the Makran coast, joining the spreading site from the Red Sea rift south-eastward along the Chagos ArchipelagoLinks to a spreading site (Red Sea rift to Chagos)
Southern (with the Antarctic plate)Oceanic ridge running roughly west to east, merging into the spreading site a little south of New ZealandDivergent

Time line of the Indian plate (textbook dates, million years ago)

  1. Till about 225 Tethys Sea separates India, an island off Australia, from Asia.
  2. About 200 Pangaea breaks; India begins its northward journey.
  3. About 140 India lies as far south as 50°S.
  4. About 60 onward Lava outpourings form the Deccan Traps; India near the equator.
  5. About 40-50 India collides with Asia; rapid uplift of the Himalayas begins.
  6. Present Collision continues; the Himalayas are still rising.

India left with the break-up of Pangaea about 200 million years ago, lay at 50°S about 140 million years ago, formed the Deccan Traps from about 60 million years ago near the equator, and collided with Asia 40-50 million years ago, raising the Himalayas, which are still rising.

Ongoing convergence in the Himalayan region

  1. Indian plate pushes north Mantle convection keeps the plate moving.
  2. Crust is compressed Continental crust crumples at the boundary.
  3. Uplift Mountains rise; the Himalayas gain height.
  4. Stress builds Strain accumulates along faults, released in earthquakes, while the push continues.

Then back to step 1: Indian plate pushes north

Key takeaways: the Indian plate includes Peninsular India and Australia; its northern boundary along the Himalayas is a continent-continent convergence, its eastern and southern edges include spreading ridges, and its western boundary follows the Kirthar mountains and the Makran coast. India, separated from Asia by the Tethys Sea, began moving north about 200 million years ago, lay at 50°S about 140 million years ago, produced the Deccan Traps from about 60 million years ago near the equator, and collided with Asia 40-50 million years ago. The Himalayas are still rising.

Read the full lesson

Privacy · Terms · Refunds · Delivery