Revision notes

Chapter 11 Introduction to Three Dimensional Geometry: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Coordinate axes and coordinate planes in space

The three coordinate planes
Coordinate planeContains the axesEquation of the planePoints look like
XY-planex-axis and y-axisz = 0(x, y, 0)
YZ-planey-axis and z-axisx = 0(0, y, z)
ZX-planez-axis and x-axisy = 0(x, 0, z)

The rectangular coordinate system in space

  • Origin O
    • Common point of all three axes and planes
    • Coordinates (0, 0, 0)
  • Three axes
    • x-axis: X′OX
    • y-axis: Y′OY
    • z-axis: Z′OZ
    • Mutually perpendicular
  • Three coordinate planes
    • XY-plane (z = 0)
    • YZ-plane (x = 0)
    • ZX-plane (y = 0)
  • Eight octants
    • Regions into which the three planes divide space

The x-, y- and z-coordinates of a point are its signed perpendicular distances from the YZ-, ZX- and XY-planes respectively.

  • A point in space needs three coordinates: its signed distances from three mutually perpendicular planes.
  • The axes meet at the origin O(0, 0, 0); the coordinate planes are z = 0, x = 0 and y = 0.
  • x is measured from the YZ-plane, y from the ZX-plane and z from the XY-plane.
Read the full lesson

Lesson 2

Coordinates of a point and the eight octants

Locating the point (x, y, z)

  1. Mark L on the x-axis Move x units from O along the x-axis.
  2. Move to M From L move y units parallel to the y-axis; M = (x, y, 0) lies in the XY-plane.
  3. Rise to P From M move z units parallel to the z-axis to reach P(x, y, z).
Each step moves parallel to one axis, so each coordinate is used once
Zero coordinates show which axis or plane a point lies on
Where the point isForm of its coordinates
Origin(0, 0, 0)
On the x-axis(x, 0, 0)
On the y-axis(0, y, 0)
On the z-axis(0, 0, z)
In the XY-plane(x, y, 0)
In the YZ-plane(0, y, z)
In the ZX-plane(x, 0, z)
Signs of the coordinates in each octant
OctantIIIIIIIVVVIVIIVIII
x+−−++−−+
y++−−++−−
z++++−−−−

Octants above and below the XY-plane

  • Above (z > 0)
    • I: x +, y +
    • II: x −, y +
    • III: x −, y −
    • IV: x +, y −
  • Below (z < 0)
    • V: x +, y + (under I)
    • VI: x −, y + (under II)
    • VII: x −, y − (under III)
    • VIII: x +, y − (under IV)
  • Each point corresponds to exactly one ordered triple (x, y, z) and vice versa.
  • Zero coordinates show which axes or planes a point lies on.
  • The signs of x, y, z decide the octant: I to IV above the XY-plane, V to VIII below.
  • Points on a coordinate plane are in no octant.
Read the full lesson

Lesson 3

Distance between two points in space

Distance between P(x₁, y₁, z₁) and Q(x₂, y₂, z₂): PQ = √[(x₂ − x₁)² + (y₂ − y₁)² + (z₂ − z₁)²]. From the origin: OQ = √(x² + y² + z²).

Pythagoras twice inside the box

  1. Box with diagonal PQ Edges |x₂ − x₁|, |y₂ − y₁|, |z₂ − z₁|
  2. Face diagonal AQ² = (x₂ − x₁)² + (z₂ − z₁)²
  3. Space diagonal PQ² = AQ² + (y₂ − y₁)²
  4. Result PQ² = sum of the three squared differences
Distances worked out in this lesson
Pair of pointsSquared differencesDistance
(2, −1, 3), (5, 3, 15)9 + 16 + 144 = 16913
(0, 3, −1), (2, −3, 2)4 + 36 + 9 = 497
(0, 0, 0), (1, 2, −2)1 + 4 + 4 = 93
(1, 1, 1), (2, 2, 2)1 + 1 + 1 = 3√3
  • PQ = √[(x₂ − x₁)² + (y₂ − y₁)² + (z₂ − z₁)²]; from the origin √(x² + y² + z²).
  • Squaring removes signs, so the order of points does not matter.
  • Set squared distances equal (or equal to a given square) to find unknown coordinates; expect up to two answers.
Read the full lesson

Lesson 4

Using distances: collinear points and types of triangles and quadrilaterals

Working with squared lengths avoids square roots
Test on the sides (or their squares)Conclusion
Two sides equalIsosceles triangle
All three sides equalEquilateral triangle
Square of the longest side = sum of squares of the other twoRight-angled triangle (converse of Pythagoras)
Sum of two sides = third sideNo triangle: the points are collinear

Classifying a quadrilateral ABCD by distances

  • Parallelogram
    • AB = CD and BC = DA
    • or diagonals bisect each other (same mid-point)
  • Rectangle
    • A parallelogram
    • with equal diagonals AC = BD
  • Rhombus
    • All four sides equal
    • Diagonals unequal
  • Square
    • All four sides equal
    • and equal diagonals

Collinear: longest distance = sum of the other two. Right angle: Pythagoras on squared lengths. Parallelogram: opposite sides equal; rectangle: plus equal diagonals.

  • Work with squared distances to keep arithmetic simple.
  • PQ + QR = PR means P, Q, R are collinear.
  • Converse of Pythagoras identifies right-angled triangles.
  • Equal opposite sides give a parallelogram; equal diagonals as well give a rectangle.
Read the full lesson

Lesson 5

Locus equations, mid-point and centroid in space

Finding the equation of a locus

  1. Let P = (x, y, z) A general point of the set.
  2. Write the condition Express each distance with the distance formula.
  3. Square to remove roots Square both sides; repeat if a root remains.
  4. Simplify Collect terms; the result is the equation of the locus.
Averages taken coordinate by coordinate
PointFormula
Mid-point of (x₁, y₁, z₁) and (x₂, y₂, z₂)((x₁ + x₂)/2, (y₁ + y₂)/2, (z₁ + z₂)/2)
Centroid of a triangle with vertices (xᵢ, yᵢ, zᵢ)((x₁ + x₂ + x₃)/3, (y₁ + y₂ + y₃)/3, (z₁ + z₂ + z₃)/3)

Locus: let P = (x, y, z), write the condition with the distance formula, square and simplify. Mid-point and centroid: average the coordinates.

  • Points equidistant from two points form a plane through the mid-point.
  • PA² + PB² = constant and similar conditions give equations of second degree, such as spheres.
  • Mid-point and centroid are coordinate-wise averages; they find missing vertices quickly.
Read the full lesson

Privacy · Terms · Refunds · Delivery