Revision notes

Chapter 6 Application of Derivatives: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Rate of change of quantities

Rate of change of y with respect to x: dy/dx. Related rates: dy/dt = (dy/dx)(dx/dt).

— Rule

Solving a related-rates problem

  1. Name the quantities Which quantity's rate is given, and which is wanted?
  2. Write the formula linking them e.g. A = πr², V = (4/3)πr³
  3. Differentiate with respect to t Use the chain rule on every changing quantity.
  4. Substitute the instant's values Only after differentiating.
  5. State the answer with units and sign Positive = increasing, negative = decreasing.
Common related-rates formulas
QuantityFormulaRate with respect to time
Area of circleA = πr²dA/dt = 2πr dr/dt
CircumferenceC = 2πrdC/dt = 2π dr/dt
Volume of sphereV = (4/3)πr³dV/dt = 4πr² dr/dt
Surface of sphereS = 4πr²dS/dt = 8πr dr/dt
Volume of cubeV = x³dV/dt = 3x² dx/dt
Area of rectangleA = xydA/dt = y dx/dt + x dy/dt

Key takeaways: dy/dx is a rate. For quantities changing with time, write the linking formula, differentiate with respect to t by the chain rule, then substitute the values at the instant. A decreasing quantity has a negative rate. Marginal cost and revenue are just dC/dx and dR/dx.

Read the full lesson

Lesson 2

Increasing and decreasing functions

f′ > 0 on an interval ⇒ f increasing there. f′ < 0 ⇒ decreasing. f′ = 0 throughout ⇒ constant.

— First derivative test for monotonicity

Finding intervals of increase and decrease

  1. Find f′(x) and factorise it Work out where f′(x) = 0 (or does not exist).
  2. Mark these points on the number line They split the domain into intervals.
  3. Test the sign of f′ in each interval Use one sample point per interval.
  4. Read off the answer Positive: increasing. Negative: decreasing.
Sign chart for f′(x) = 6(x − 1)(x − 2)
IntervalSample xSign of (x − 1)(x − 2)f is
(−∞, 1)0(−)(−) = +increasing
(1, 2)1.5(+)(−) = −decreasing
(2, ∞)3(+)(+) = +increasing

Reading the sign of f′(x)

  • f′(x) > 0 on an interval
    • Graph rises left to right
    • f is increasing there
    • Example: x³ + 3x on R
  • f′(x) < 0 on an interval
    • Graph falls left to right
    • f is decreasing there
    • Example: 1/x on (0, ∞)

Key takeaways: the sign of f′ decides increase or decrease. Find where f′ = 0, split the domain into intervals, test one point in each, and report intervals (closed at the turning points where f is continuous). A zero derivative at a single point does not stop a function from increasing.

Read the full lesson

Lesson 3

Local maxima and minima: first and second derivative tests

Reading the sign change of f′ at a critical point

  • Local maximum
    • f′ positive just left of c
    • f′ negative just right of c
    • Graph rises then falls
  • Local minimum
    • f′ negative just left of c
    • f′ positive just right of c
    • Graph falls then rises
  • Neither (inflection)
    • f′ keeps the same sign
    • Graph keeps rising or keeps falling
    • Example: x³ at 0

f′(c) = 0 and f″(c) < 0 ⇒ local maximum. f′(c) = 0 and f″(c) > 0 ⇒ local minimum. f″(c) = 0 ⇒ no conclusion; use the first derivative test.

— Second derivative test
Summary of the examples
FunctionCritical pointTest usedResult
x³ − 6x² + 9x + 1x = 1f″ = −6 < 0Local max 5
x³ − 6x² + 9x + 1x = 3f″ = 6 > 0Local min 1
x⁴x = 0f″ = 0, first testLocal min 0
x³x = 0f′ does not change signInflection
2 + |x − 1|x = 1First test (no derivative)Local min 2

Key takeaways: local extrema occur only at critical points (f′ = 0 or f′ undefined). The first derivative test always works when f is continuous at the point; the second derivative test is quicker but fails when f″(c) = 0 and cannot be used where f′ does not exist. Local maximum and minimum values are about nearby points only.

Read the full lesson

Lesson 4

Absolute maximum and minimum on a closed interval

Working rule for absolute extrema on [a, b]

  1. Find critical points in (a, b) Where f′(x) = 0 or f is not differentiable.
  2. Add the end points x = a and x = b
  3. Evaluate f at every candidate Make a table of values.
  4. Pick the largest and smallest These are the absolute maximum and minimum values.

On [a, b], compare f at the critical points and at a and b. The largest value is the absolute maximum, the smallest is the absolute minimum.

— Working rule
Candidates for f(x) = 2x³ − 15x² + 36x + 1 on [1, 5]
xCalculationf(x)
1 (end point)2 − 15 + 36 + 124
2 (critical)16 − 60 + 72 + 129
3 (critical)54 − 135 + 108 + 128
5 (end point)250 − 375 + 180 + 156

Local versus absolute extrema

  • Local
    • Compared with nearby points only
    • Only at interior critical points
    • A function can have several
  • Absolute on [a, b]
    • Compared with every point of [a, b]
    • At a critical point or an end point
    • Exactly one greatest value and one least value

Key takeaways: on a closed interval, list the critical points inside it and both end points, evaluate f at each, and choose the largest and smallest. Ignore critical points outside the interval. Open intervals may have no absolute extremes.

Read the full lesson

Lesson 5

Optimisation problems: maximum and minimum in real situations

Solving an optimisation problem

  1. Draw and name Sketch the situation; name the variables.
  2. Write the target quantity The quantity to be maximised or minimised.
  3. Use the condition Eliminate variables until the target depends on one variable; note its allowed domain.
  4. Differentiate and solve f′ = 0 Find the critical points in the domain.
  5. Confirm max or min Second derivative test, or compare values at end points.
  6. Answer the question Give the requested quantity with units.
Optimisation results in this lesson
ProblemFunction of one variableCritical pointAnswer
Sum 12, maximise x²y12x² − x³x = 88 and 4; value 256
Open box from 18 cm sheetx(18 − 2x)²x = 3432 cm³
Perimeter 40 m, max area20x − x²x = 10Square, 100 m²
Can of volume 128π cm³2πr² + 256π/rr = 4h = 8 cm, 96π cm²
Nearest point to (5, 0) on y² = 4xx² − 6x + 25x = 3Distance 4

Write the target as a function of one variable, solve f′ = 0 inside the allowed domain, confirm with f″ (or end-point values), then answer in the units of the question.

— Method

Key takeaways: most of the work is setting up the function correctly: use the given condition to reduce to one variable and note its domain. Then differentiate, solve, confirm the nature of the critical point, and answer exactly what was asked. Minimising a distance is easier through its square.

Read the full lesson

Privacy · Terms · Refunds · Delivery