Revision notes

Chapter 8 A Journey through States of Water: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Ice, water and vapour: where does water disappear?

The three states of water

  • Solid: ice
    • Hard, keeps its shape
    • Can be held in the hand
  • Liquid: water
    • Flows and splashes
    • Takes the shape of its container
  • Gas: water vapour
    • Invisible
    • Spreads into all the space around

Evaporation is the change of liquid water into water vapour. It happens all the time, even at room temperature, not only when water boils.

Key takeaways: ice, water and water vapour are the solid, liquid and gas states of one substance. Evaporation changes water into invisible water vapour and happens continuously, even at room temperature. Testing on a surface that water cannot pass through, like steel, shows that disappearing water goes into the air. The visible white 'steam' is tiny droplets, not the vapour itself.

Read the full lesson

Lesson 2

Condensation: droplets from the air

How droplets form on a cold tumbler

  1. Water vapour in the air Always present, though invisible.
  2. Touches the cold glass The vapour near the glass cools.
  3. Turns into tiny droplets Vapour changes back into liquid.
  4. Droplets join Bigger drops form and may trickle down.

Condensation is the change of water vapour into liquid water. It happens when water vapour in the air comes in contact with a cold surface.

Key takeaways: droplets on a cold glass come from water vapour in the air, as shown by testing a room-temperature glass, marking the water level and weighing. Condensation is the change of water vapour into liquid when it meets a cold surface; it is the reverse of evaporation. Dew, drops under a lid and a sweating cold bottle are examples. Humidity is the amount of water vapour in the air.

Read the full lesson

Lesson 3

Solids, liquids and gases, and changing states

Properties of the three states of water
PropertyIce (solid)Water (liquid)Water vapour (gas)
ShapeFixed; keeps its shape in any containerNot fixed; takes the shape of its containerNot fixed; fills the whole space
VolumeFixedFixedSpreads into all the space available
Flows?NoYesYes, spreads freely
Spreads on a surface?NoYes, while its volume stays the sameSpreads in all directions

Changes of state of water

  1. Ice (solid) Melts on heating.
  2. Water (liquid) Evaporates into vapour; heating speeds it up.
  3. Water vapour (gas) Condenses on cooling.
  4. Cooled water (liquid) Freezes into ice on further cooling.

Then back to step 1: Ice (solid)

Heating moves water up the cycle from solid to gas; cooling brings it back.

Heating: solid → liquid (melting), liquid → gas (evaporation). Cooling: gas → liquid (condensation), liquid → solid (freezing).

Key takeaways: solids have a fixed shape and volume; liquids have a fixed volume but take the shape of the container; gases have no fixed shape and spread to fill the space. Melting and evaporation happen with heating; condensation and freezing happen with cooling. Many substances besides water, such as wax, ghee and coconut oil, change state in the same ways.

Read the full lesson

Lesson 4

Faster or slower evaporation, and the cooling effect

Conditions that affect evaporation
ConditionFaster evaporation when...Everyday example
Exposed areaThe water is spread over a larger areaClothes dry faster when spread out than when bunched up
HeatIt is hotter, for example in sunlightClothes dry faster on a sunny day
Air movementAir is moving, as on a windy day or under a fanWet hair dries faster in a breeze
HumidityThe air holds less water vapour (dry air)Clothes dry slowly on humid, rainy days

Planning a fair test

  1. Choose one condition to change For example sunlight or shade.
  2. Keep everything else the same Same amount of water, same container, same start time.
  3. Decide what to measure Time taken to dry completely.
  4. Compare and conclude The difference is due to the one thing you changed.

Evaporation causes cooling: water needs heat to evaporate, and it takes that heat from the surface or body it is evaporating from.

Key takeaways: evaporation is faster with a larger exposed area, more heat, more air movement and lower humidity. A fair test changes only one condition and keeps the others the same. Evaporation takes heat from its surroundings, so it cools: a matka, sweat, a fan, a sprinkled floor and a pot-in-pot cooler all use this cooling effect.

Read the full lesson

Lesson 5

Clouds, rain and the water cycle

The water cycle

  1. Evaporation Water from oceans, rivers, lakes and land becomes vapour.
  2. Rising and cooling Vapour rises with air and cools high up.
  3. Condensation Vapour condenses around dust into droplets, forming clouds.
  4. Rain, hail or snow Heavy drops fall back to the Earth.
  5. Collection Water flows in rivers, soaks into the ground and returns to the oceans.

Then back to step 1: Evaporation

The water cycle is the circulation of water between the Earth's surface and the atmosphere: evaporation, condensation into clouds, rain (or hail or snow), and flow back to rivers and oceans.

Key takeaways: water evaporates, rises, cools and condenses around dust to form clouds. Droplets join into heavy drops that fall as rain, hail or snow. This endless circulation is the water cycle, driven by evaporation and condensation. Usable fresh water is limited, so we must save it and keep water bodies clean.

Read the full lesson

Privacy · Terms · Refunds · Delivery