Revision notes

Chapter 3 Proportional Reasoning-2: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Proportional ratios and map scales

a : b :: c : d exactly when a × d = b × c.

What 1 cm stands for at some common scales
Scale (RF)1 cm on the map isIn kilometres
1 : 1,00,0001,00,000 cm1 km
1 : 10,00,00010,00,000 cm10 km
1 : 25,00,00025,00,000 cm25 km
1 : 50,00,00050,00,000 cm50 km

From a map to the real distance

  1. Measure on the map Use a ruler, in centimetres.
  2. Multiply by the scale number This gives the real distance in centimetres.
  3. Convert to kilometres Divide by 1,00,000.
  4. Sense-check A straight-line distance; roads are usually longer.

Key takeaways: ratios are proportional when their cross-products are equal. A map scale 1 : n says that 1 unit on the map is n of the same units on the ground; multiply map lengths by n to get real lengths, and divide real lengths by n to get map lengths. Always convert units carefully: 1 km = 1,00,000 cm.

Read the full lesson

Lesson 2

Ratios with more than two terms

a : b : c : d :: p : q : r : s means a/p = b/q = c/r = d/s. Every term changes by the same factor.

Finding the rest of a mixture from one known quantity

  1. Match the known quantity to its term Which part of the ratio does it belong to?
  2. Find the value of one part Divide the known quantity by its term.
  3. Multiply every other term by one part Each term × value of one part.
  4. Add up if the total is needed Then check the new ratio simplifies back.
Scaling the ratio 3 : 2 : 1 for green paint
Yellow (litres)Blue (litres)White (litres)Total (litres)Factor
3216× 1
64212× 2
1.510.53× ½
1510530× 5

Key takeaways: a ratio can have any number of terms. Simplify by dividing all terms by their HCF. Two multi-term ratios are proportional when every term changes by the same factor. When one quantity is known, find the value of one part, then multiply every term by it.

Read the full lesson

Lesson 3

Dividing a whole in a given ratio

Dividing a whole in a ratio

  1. Add the terms a + b + c is the number of equal parts.
  2. Find one part Divide the whole by the number of parts.
  3. Multiply each term by one part This gives each share.
  4. Check The shares must add up to the whole.

When x is divided in the ratio a : b : c, the shares are x × a/(a + b + c), x × b/(a + b + c) and x × c/(a + b + c).

Can these ratios be the sides of a triangle?
Ratio of sidesTwo shorter sides addedLongest sideTriangle?
3 : 4 : 575Yes
2 : 3 : 454Yes
1 : 2 : 333No (equal, so it lies flat)
1 : 3 : 545No

Key takeaways: to divide a whole in a ratio, add the terms, find one part, and multiply. Always check that the shares add back to the whole. Angle sums (180° for a triangle, 360° for a quadrilateral) turn angle ratios into sharing problems, and a ratio of sides makes a triangle only if the two shorter sides together are longer than the longest.

Read the full lesson

Lesson 4

A slice of the pie: drawing and reading pie charts

Angle of a slice = (value ÷ total) × 360°. For percentages, 1% of the circle is 3.6°.

Angles for the sports pie chart
SportStudentsSimplified ratioAngle
Cricket2488 × 18° = 144°
Football1555 × 18° = 90°
Kabaddi1244 × 18° = 72°
Badminton933 × 18° = 54°
Total6020360°

Steps to draw a pie chart

  1. Draw a circle and one radius Use compasses; draw a radius as the starting line.
  2. Measure the first angle Place the protractor at the centre and mark the first slice's angle from the radius.
  3. Draw the new radius This is the starting line for the next slice.
  4. Repeat for each slice The last slice should close exactly at the first radius.
  5. Label or colour Name each slice and give the chart a title.

Making a chart versus reading one

  • Making a pie chart
    • Start from the data
    • Angle = value ÷ total × 360°
    • Draw slices with a protractor
  • Reading a pie chart
    • Start from an angle
    • Fraction = angle ÷ 360°
    • Number = fraction × total

Key takeaways: a pie chart divides 360° in the same ratio as the data. Simplify the data ratio first, find the angle for one part, then multiply. For percentages, multiply by 3.6°. To read a chart, turn each angle into a fraction of 360° and multiply by the total.

Read the full lesson

Lesson 5

Inverse proportion

Travelling a fixed 120 km
Speed (km/h)10204060
Time (hours)12632
Speed × time120120120120

x and y are in inverse proportion when xy = k, a constant. Then x₁y₁ = x₂y₂, or x₁/x₂ = y₂/y₁.

Direct and inverse proportion

  • Direct proportion
    • Both increase or both decrease
    • x/y stays the same
    • Example: number of pens and their cost
    • x₁/y₁ = x₂/y₂
  • Inverse proportion
    • One increases as the other decreases
    • x × y stays the same
    • Example: number of workers and days for a job
    • x₁y₁ = x₂y₂

Time taken working together

  1. Work per hour for each If someone takes t hours, they do 1/t of the job each hour.
  2. Add the hourly work This is what both do together in one hour.
  3. Find the time for the whole job Time = 1 ÷ (combined work per hour).

Key takeaways: in direct proportion the ratio stays constant; in inverse proportion the product stays constant. For inverse problems, write x₁y₁ = x₂y₂ and solve. State the assumption that the rate of work stays the same. For joint work, add the fractions of the job done per hour, then divide 1 by the total.

Read the full lesson

Privacy · Terms · Refunds · Delivery