Revision notes

Chapter 10 Light: Mirrors and Lenses: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Spherical mirrors: concave and convex

Two kinds of spherical mirror

  • Concave mirror
    • Reflecting surface curves inwards, like the inside of a bowl
    • Like the inner side of a spoon
    • Can give an upside-down image
  • Convex mirror
    • Reflecting surface bulges outwards
    • Like the back of a spoon
    • Always gives an upright, smaller image

A concave mirror's reflecting surface curves inwards; a convex mirror's reflecting surface bulges outwards. Both are spherical mirrors.

Telling the mirrors apart

  1. Look from the side Keep your eye level with the mirror lying face up
  2. Hollow facing up? The reflecting surface curves in: concave
  3. Bulge facing up? The reflecting surface curves out: convex
  4. Flat? Plane mirror
Mirrors compared
MirrorShape of reflecting surfaceEveryday example
PlaneFlatDressing-table mirror
ConcaveCurves inwardsInside of a spoon; dentist's mirror
ConvexBulges outwardsBack of a spoon; vehicle side-view mirror

Key takeaways: spherical mirrors have reflecting surfaces shaped like part of a sphere. A concave mirror curves inwards like a bowl; a convex mirror bulges outwards. A shiny spoon shows both: the hollow side can give an inverted image, the back always gives an erect, smaller image. You can identify a mirror by its shape or by the images it forms.

Read the full lesson

Lesson 2

Images in spherical mirrors and their uses

Comparing images
MirrorObject closeObject far awayLateral inversion?
PlaneErect, same sizeErect, same sizeYes
ConcaveErect, enlargedInverted; enlarged at first, then smallerYes
ConvexErect, diminishedErect, diminished (slightly smaller)Yes

Uses of concave mirrors

  • Torch and headlight reflectors
    • Gather the light of the bulb and send it forward as a strong beam
  • Dentist's mirror
    • Held close to a tooth, it gives an enlarged, erect image
  • Shaving and make-up mirrors
    • Enlarged view of the face held close
  • Reflecting telescopes
    • A large concave mirror collects light from distant stars

Choosing a mirror

  • Need an enlarged view of something close
    • Concave mirror
    • Dentist, make-up mirror
  • Need a wide view of a large area
    • Convex mirror
    • Vehicles, road bends, shops
  • Need a true-size view
    • Plane mirror
    • Dressing-table mirror

A convex mirror always gives an erect, diminished image and a wide field of view; a concave mirror gives an erect, enlarged image of a close object and an inverted image of a farther object.

Key takeaways: a concave mirror gives an erect, enlarged image when the object is close, and an inverted image that shrinks as the object moves away. A convex mirror always gives an erect, smaller image and shows a wide area. Plane mirrors give erect, same-size images. All show lateral inversion. Concave mirrors are used in torches, by dentists and in telescopes; convex mirrors on vehicles, at road bends and in shops.

Read the full lesson

Lesson 3

The laws of reflection

Parts of a reflection diagram

  • Incident ray
    • The ray falling on the mirror
  • Reflected ray
    • The ray coming back from the mirror
  • Point of incidence
    • Where the incident ray meets the mirror
  • Normal
    • A line drawn at 90° to the mirror at the point of incidence
  • Angle of incidence (i)
    • Between the incident ray and the normal
  • Angle of reflection (r)
    • Between the reflected ray and the normal

Laws of reflection: (1) the angle of incidence equals the angle of reflection; (2) the incident ray, the normal at the point of incidence and the reflected ray all lie in the same plane.

Practice with the first law
Angle of incidenceAngle of reflectionAngle of reflected ray with mirror
0°0°90°
25°25°65°
40°40°50°
60°60°30°

Key takeaways: rays show the path of light. The normal is drawn at 90° to the mirror at the point of incidence, and both i and r are measured from it. The angle of incidence equals the angle of reflection, and the incident ray, normal and reflected ray lie in one plane. The angle with the mirror surface is 90° minus the angle with the normal. The laws apply to plane and curved mirrors alike.

Read the full lesson

Lesson 4

Mirrors that gather and spread light

Parallel beams after reflection

  • Plane mirror
    • Reflected beams stay parallel
  • Concave mirror
    • Reflected beams come closer together: they converge
  • Convex mirror
    • Reflected beams spread apart: they diverge

A concave mirror converges a beam of light; a convex mirror diverges it; a plane mirror keeps parallel rays parallel.

Safety rules for this activity
AlwaysNever
Do it with a teacher or adultLook at the Sun directly or at its reflection in the mirror
Aim the bright spot only at paper on a safe surfaceAim it at anyone's face, eyes, skin or clothes
Keep water nearby and stay away from dry leavesLeave the mirror lying in sunlight unattended

How a concave mirror makes a hot spot

  1. Sunlight arrives Rays from the Sun fall on the whole mirror, nearly parallel
  2. Each ray reflects Following i = r at its own point on the curved surface
  3. Rays converge They meet in a small area in front of the mirror
  4. Heat builds up Energy from a large area is packed into a small spot

Key takeaways: parallel rays stay parallel after reflection from a plane mirror, converge after a concave mirror and diverge after a convex mirror, although every ray obeys the laws of reflection. A concave mirror can concentrate sunlight onto a small hot spot, which is the idea behind solar concentrators, solar cookers and solar furnaces. Never look at the Sun or aim the spot at people.

Read the full lesson

Lesson 5

Lenses: convex and concave

Two kinds of lens

  • Convex lens
    • Thicker in the middle than at the edges
    • Converges light (converging lens)
    • Magnifying glass
  • Concave lens
    • Thinner in the middle than at the edges
    • Diverges light (diverging lens)
    • Some spectacles
How an object looks through a lens
LensObject close behind the lensObject farther from the lens
ConvexErect and enlargedInverted; enlarged at first, then diminished
ConcaveErect and diminishedStill erect and diminished
Flat glassSame as without glassSame as without glass

A convex lens is thicker in the middle and converges light; a concave lens is thicker at the edges and diverges light.

Where lenses are used

  • Spectacles
    • Help many people see clearly
  • Cameras
    • Including phone cameras
  • Microscopes and telescopes
    • Make tiny or distant things visible
  • Magnifying glass
    • A convex lens for reading small print
  • The human eye
    • Has a convex lens that changes shape to see near and far

Key takeaways: lenses are transparent with curved surfaces and let light pass through. Convex lenses are thicker in the middle, converge light and make close objects look erect and enlarged, farther objects inverted. Concave lenses are thicker at the edges, diverge light and always make objects look erect and smaller. Lenses are used in spectacles, cameras, microscopes, telescopes and our own eyes. Never look at the Sun through a lens.

Read the full lesson

Privacy · Terms · Refunds · Delivery