Revision notes

Chapter 13 Two Variables, One Line: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Linear equations in two variables and the standard form

15x + 12y = 90

A linear equation in two variables is one that can be written as ax + by + c = 0, where a, b and c are real numbers and a and b are not both zero. Here a is the coefficient of x, b is the coefficient of y and c is the constant term.

— Standard form

From a situation to the standard form

  1. Name the unknowns Say exactly what x and y stand for, with units
  2. Write each quantity For example, the cost of x samosas is 15x rupees
  3. Form the equation Put equal quantities on the two sides
  4. Move all terms to one side Get ax + by + c = 0
  5. Tidy up Clear fractions or decimals; read off a, b, c
Each equation moved to the form ax + by + c = 0
EquationStandard formabc
3x = 7 − 2y3x + 2y − 7 = 032−7
y = 4x − 54x − y − 5 = 04−1−5
x/3 + y/4 = 14x + 3y − 12 = 043−12
2y = 90×x + 2y − 9 = 002−9
x = −6x + 0×y + 6 = 0106

Key takeaways: a linear equation in two variables can always be written as ax + by + c = 0 with a and b not both zero. Clear fractions by multiplying through, remember that one of a or b may be 0, and test a word relation with a small number before trusting it.

Read the full lesson

Lesson 2

Solutions of a linear equation and its graph

Every solution of a linear equation in two variables is a point on its graph, and every point on the graph is a solution. The graph is a straight line.

Drawing the graph of ax + by + c = 0

  1. Put x = 0 Solve for y: the point (0, y) on the y-axis
  2. Put y = 0 Solve for x: the point (x, 0) on the x-axis
  3. Find a check point Choose another x and find y
  4. Plot and join All three should lie on one straight line
Solutions of 3x + 4y = 24
x084
y603

Key takeaways: a solution is an ordered pair that satisfies the equation, and there are infinitely many of them. They form a straight line: points on the line are exactly the solutions. Use the intercepts (put x = 0, then y = 0) to draw it quickly, and plot a third point to check.

Read the full lesson

Lesson 3

Slope and the slope-intercept form y = mx + d

Slope m = rise ÷ run = (y₂ − y₁) ÷ (x₂ − x₁), for any two points (x₁, y₁) and (x₂, y₂) on the line with x₁ ≠ x₂.

(y₂ − y₁) ÷ (x₂ − x₁) = [(mx₂ + d) − (mx₁ + d)] ÷ (x₂ − x₁) = m(x₂ − x₁) ÷ (x₂ − x₁) = m

What the slope tells you

  • Positive (m > 0)
    • Line rises from left to right
    • y increases as x increases
    • Example: y = 2x + 1
  • Negative (m < 0)
    • Line falls from left to right
    • y decreases as x increases
    • Example: y = −3x + 4
  • Zero (m = 0)
    • Horizontal line
    • y stays the same
    • Example: y = 5
  • Undefined
    • Vertical line
    • x stays the same; run is 0
    • Example: x = 2

Key takeaways: slope = rise ÷ run and is the same for any two points on a line. In y = mx + d, m is the slope and the line crosses the y-axis at (0, d). For ax + by + c = 0 with b ≠ 0, the slope is −a/b. Positive slopes rise, negative slopes fall, horizontal lines have slope 0 and vertical lines have no defined slope.

Read the full lesson

Lesson 4

Pairs of linear equations: substitution and elimination

A pair of linear equations: a₁x + b₁y + c₁ = 0 and a₂x + b₂y + c₂ = 0. Its solution is a pair (x, y) that makes both true. Both methods below turn the pair into ONE equation in ONE variable.

Substitution method

  1. Pick an equation Choose the one where a variable is easiest to isolate
  2. Express one variable For example, x in terms of y
  3. Substitute Put this expression into the OTHER equation
  4. Solve for one variable You now have one equation in one variable
  5. Back-substitute and check Find the other variable; test both original equations
Choosing a method
MethodBest whenWatch out for
SubstitutionA variable already has coefficient 1 or −1, or is given as y = ...Brackets when substituting: 3(95 − 3n), not 3 × 95 − 3n
EliminationNo coefficient is 1; numbers are largerMultiply EVERY term, including the constant

Key takeaways: two unknowns need two conditions. Substitution expresses one variable through the other and puts it into the second equation; elimination multiplies the equations so one variable cancels when you add or subtract. Always check the answer in both original equations and in the words of the problem.

Read the full lesson

Lesson 5

How many solutions? The ratio test and the graphical method

For a₁x + b₁y + c₁ = 0 and a₂x + b₂y + c₂ = 0 (with a₂, b₂, c₂ non-zero)
What happens in eliminationRatio conditionNumber of solutionsThe two lines
One variable is left to solve fora₁/a₂ ≠ b₁/b₂Exactly oneIntersect at one point
Both variables cancel and you get 0 = 0a₁/a₂ = b₁/b₂ = c₁/c₂Infinitely manyCoincident (the same line)
Both variables cancel and you get 0 = a non-zero numbera₁/a₂ = b₁/b₂ ≠ c₁/c₂NoneParallel (never meet)

a₁/a₂ ≠ b₁/b₂: unique solution. a₁/a₂ = b₁/b₂ = c₁/c₂: infinitely many solutions. a₁/a₂ = b₁/b₂ ≠ c₁/c₂: no solution.

Pictures of a pair of linear equations

  • Intersecting lines
    • Different slopes
    • Meet at exactly one point
    • That point is the unique solution
  • Coincident lines
    • One equation is a multiple of the other
    • Every point of the line is a solution
    • Infinitely many solutions
  • Parallel lines
    • Same slope, different y-intercepts
    • Never meet
    • No solution
Points for each line
LinePoint 1Point 2Check point
x + y = 5(0, 5)(5, 0)(2, 3)
2x − y = 4(0, −4)(2, 0)(4, 4)

Key takeaways: a pair of linear equations has one solution, no solution or infinitely many. Compare a₁/a₂ with b₁/b₂: unequal means the lines cross once; equal means the same slope, and then c₁/c₂ decides between coincident (equal) and parallel (unequal). On a graph, the solution is where the lines meet.

Read the full lesson

Privacy · Terms · Refunds · Delivery