Revision notes

Chapter 4 Describing Motion Around Us: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Position, distance and displacement

Distance travelled and displacement

  • Distance travelled
    • Length of the whole path
    • Only a numerical value (no direction)
    • Never decreases as the object moves
    • Decides fuel used
  • Displacement
    • Final position minus initial position
    • Has magnitude and direction
    • Can be zero even after a long journey
    • Magnitude never more than distance

Displacement = final position - initial position. Its magnitude is less than or equal to the distance travelled, and the two are equal only when the object moves in one direction without turning back.

Ball thrown up and caught
MomentPosition (m)Distance travelled so far (m)Displacement from start (m)
Leaves hand000
At top+2.52.5+2.5
Back in hand050

Key takeaways: position is a distance and a direction from a chosen origin, with + and - for the two directions on a line. Motion is a change of position with time and depends on the reference point. Distance travelled is the total path length; displacement is final minus initial position, with a direction. The magnitude of displacement is never more than the distance and equals it only when the object does not turn back.

Read the full lesson

Lesson 2

Average speed and average velocity

Average speed = total distance travelled ÷ time interval. Average velocity = displacement ÷ time interval. SI unit of both: metre per second (m/s or m s⁻¹).

Describing how fast

  • Average speed
    • Uses total distance
    • No direction
    • Never negative
  • Average velocity
    • Uses displacement
    • Has a direction (+ or -)
    • Can be zero even when the object moved
Two ways to describe how fast
Common conversions
km/hWorkingm/s
1818 × 5 ÷ 185
3636 × 5 ÷ 1810
7272 × 5 ÷ 1820
9090 × 5 ÷ 1825

Key takeaways: average speed uses distance and has no direction; average velocity uses displacement and has a direction. For straight-line motion in one direction, the two have equal size. Average velocity can be zero for a round trip even though the average speed is not. Uniform motion covers equal distances in equal times. Multiply by 5/18 for km/h to m/s and by 18/5 for m/s to km/h.

Read the full lesson

Lesson 3

Acceleration: how quickly velocity changes

a = (v - u) ÷ t, where u is the initial velocity, v the final velocity and t the time interval. Unit: m/s².

What acceleration tells you

  • Same direction as velocity
    • Object speeds up
    • Positive for forward motion
  • Opposite to velocity
    • Object slows down
    • Negative for forward motion
  • Zero
    • Velocity constant
    • Fast or slow does not matter
  • Direction changing
    • Speed may be constant
    • Still accelerated
Reading acceleration
A dropped stone, ignoring air resistance
Time (s)Velocity (m/s, downward positive)Change in the last second (m/s)
00-
19.89.8
219.69.8
329.49.8
439.29.8

Key takeaways: acceleration is the rate of change of velocity, a = (v - u) ÷ t, in m/s². Positive acceleration (for forward motion) means speeding up; negative means slowing down. A body moving fast at steady velocity has zero acceleration. A change of direction alone is also acceleration. Free fall near the Earth has a constant acceleration g ≈ 9.8 m/s².

Read the full lesson

Lesson 4

Graphs of motion: position-time and velocity-time

Reading a position-time graph
ShapeWhat it means
Straight sloping lineConstant velocity (uniform motion)
Line parallel to the time axisObject at rest - position not changing
Curve getting steeperVelocity increasing (accelerated motion)
Steeper straight lineGreater velocity

Three velocity-time graphs

  • Parallel to time axis
    • Velocity constant
    • Slope zero
    • Acceleration zero
  • Straight line rising
    • Velocity increasing steadily
    • Positive slope
    • Constant acceleration
  • Straight line falling
    • Velocity decreasing steadily
    • Negative slope
    • Constant negative acceleration

On a velocity-time graph: slope = acceleration, and area between the line and the time axis = displacement.

Getting information from a velocity-time graph

  1. Read velocities At the start and end of the interval
  2. Find the slope Change in velocity ÷ time = acceleration
  3. Split the area Into rectangles and triangles
  4. Add the areas Total = displacement

Key takeaways: put time on the X-axis and choose sensible scales. On a position-time graph, a straight line means constant velocity, a horizontal line means rest, a curve means changing velocity, and the slope is the velocity. On a velocity-time graph, the slope is the acceleration and the area under the line is the displacement.

Read the full lesson

Lesson 5

Equations of motion and uniform circular motion

For constant acceleration: v = u + at; s = ut + ½at²; v² = u² + 2as.

Solving a motion problem

  1. List known quantities Write u, v, a, s, t with units
  2. Convert units km/h to m/s first
  3. Pick the equation The one with your unknown and no other unknowns
  4. Substitute and solve Keep signs: slowing down means a is negative
  5. Check Is the answer sensible?
Calculated stopping distances for this example
Speed (m/s)Reaction distance in 0.5 s (m)Braking distance at -5 m/s² (m)Total (m)
1051015
20104050
301590105
4020160180

Key takeaways: with constant acceleration, v = u + at, s = ut + ½at² and v² = u² + 2as; convert units first and keep signs. Stopping distance is reaction distance plus braking distance, and braking distance grows with the square of speed. In circular motion one turn has distance 2πR and displacement zero; uniform circular motion has constant speed but changing direction, so it is accelerated.

Read the full lesson

Privacy · Terms · Refunds · Delivery