Revision notes

Chapter 9 Atomic Foundations of Matter: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

The law of conservation of mass

Why the two set-ups differ

  • Open flask
    • Carbon dioxide escapes into the air
    • Balance reading falls
    • Looks as if mass is lost
  • Closed flask
    • Gas stays trapped in the balloon
    • Reading stays the same
    • Shows that mass is conserved

Law of conservation of mass: mass can neither be created nor destroyed in a chemical reaction. Total mass of reactants = total mass of products.

What a balance shows
ChangeOpen containerClosed container
Salt dissolving in waterMass unchangedMass unchanged
Precipitate forming (no gas)Mass unchangedMass unchanged
Reaction giving off a gasMass appears to fallMass unchanged
Burning a candle or fuelMass appears to fall (gases escape)Mass unchanged

Key takeaways: Mass stays the same in physical changes and in chemical reactions. If a gas forms in an open container, the balance shows a drop only because the gas escapes. Lavoisier's law of conservation of mass says the total mass of the reactants equals the total mass of the products, which lets you find a missing mass by addition or subtraction.

Read the full lesson

Lesson 2

The law of constant proportions and Dalton's atomic theory

Law of constant proportions (law of definite proportions, Proust's law): in a chemical compound, the elements are always present in a fixed ratio by mass, whatever its source or method of preparation.

How Dalton's postulates explain the laws

  • Conservation of mass Atoms are not created or destroyed
    • Atoms only rearrange in a reaction
    • So the total mass stays the same
  • Constant proportions Fixed numbers and kinds of atoms in a compound
    • Each atom of an element has a fixed mass
    • So the mass ratio is always the same

Key takeaways: A compound always has its elements in a fixed mass ratio (water is 1 : 8 hydrogen to oxygen); mixtures do not. Use the ratio to scale masses up or down. Dalton's atomic theory explains conservation of mass (atoms only rearrange) and constant proportions (fixed atoms of fixed mass in each compound).

Read the full lesson

Lesson 3

Molecules and covalent bonds

Covalent molecules of elements
MoleculeElectrons each atom needsShared pairsDrawn as
Hydrogen, H₂1 each (to fill K)1 (single bond)H—H
Chlorine, Cl₂1 each (2, 8, 7)1 (single bond)Cl—Cl
Oxygen, O₂2 each (2, 6)2 (double bond)O=O
Nitrogen, N₂3 each (2, 5)3 (triple bond)N≡N

Working out a covalent molecule

  1. Write configurations Find the valence electrons of each atom.
  2. Count electrons needed How many more for an octet (or 2 for hydrogen)?
  3. Share pairs Each shared pair counts for both atoms.
  4. Check Every atom now has 8 (hydrogen 2) in its outer shell.
Naming with prefixes
FormulaNameWhy
SO₂Sulfur dioxideOne S (no mono), two O
SO₃Sulfur trioxideThree O; keep the i
CCl₄Carbon tetrachlorideFour Cl
P₂O₅Diphosphorus pentoxideTwo P, five O; penta + oxide drops the a
N₂ODinitrogen monoxideMono is used for the second element; mono + oxide gives monoxide
CS₂Carbon disulfideTwo S

Key takeaways: A molecule is a neutral group of bonded atoms that can exist on its own; O₂ is a molecule, O a single atom. In a covalent bond atoms share pairs of electrons: one pair is a single bond, two a double bond (O=O), three a triple bond (N≡N). Covalent compounds are named with prefixes and the ending -ide.

Read the full lesson

Lesson 4

Ionic bonds, ions and writing chemical formulae

Forming sodium chloride

  1. Sodium atom 2, 8, 1 Loses its one valence electron.
  2. Sodium ion Na⁺ (2, 8) 11 protons, 10 electrons: charge +1.
  3. Chlorine atom 2, 8, 7 Gains that electron.
  4. Chloride ion Cl⁻ (2, 8, 8) 17 protons, 18 electrons: charge −1.
  5. Ionic bond Opposite charges attract: NaCl.
Some common ions
CationCharge (valency)AnionCharge (valency)
Sodium Na⁺, potassium K⁺, silver Ag⁺+1 (1)Chloride Cl⁻, bromide Br⁻, iodide I⁻−1 (1)
Ammonium NH₄⁺+1 (1)Hydroxide OH⁻, nitrate NO₃⁻−1 (1)
Copper(I), cuprous Cu⁺+1 (1)Hydrogencarbonate HCO₃⁻−1 (1)
Magnesium Mg²⁺, calcium Ca²⁺, zinc Zn²⁺+2 (2)Oxide O²⁻, sulfide S²⁻−2 (2)
Iron(II), ferrous Fe²⁺; copper(II), cupric Cu²⁺+2 (2)Carbonate CO₃²⁻, sulfate SO₄²⁻−2 (2)
Aluminium Al³⁺; iron(III), ferric Fe³⁺+3 (3)Phosphate PO₄³⁻−3 (3)

Write the symbols (cation first for ionic compounds), write the valency or charge number under each, cross the numbers over as subscripts, divide by any common factor, and put brackets round a polyatomic ion when there is more than one of it. A subscript of 1 is not written.

Crossing over charges
IonsCross overFormulaName
Al³⁺ and Cl⁻Al₁Cl₃AlCl₃Aluminium chloride
Na⁺ and O²⁻Na₂O₁Na₂OSodium oxide
Ca²⁺ and O²⁻Ca₂O₂, divide by 2CaOCalcium oxide
Mg²⁺ and NO₃⁻Mg₁(NO₃)₂Mg(NO₃)₂Magnesium nitrate
NH₄⁺ and SO₄²⁻(NH₄)₂(SO₄)₁(NH₄)₂SO₄Ammonium sulfate
Fe³⁺ and OH⁻Fe₁(OH)₃Fe(OH)₃Iron(III) hydroxide, ferric hydroxide
Ca²⁺ and PO₄³⁻Ca₃(PO₄)₂Ca₃(PO₄)₂Calcium phosphate

Key takeaways: Atoms that lose electrons become cations and atoms that gain them become anions; the attraction between them is an ionic bond, and ionic compounds form crystals, not molecules. Name the cation first and the anion second (-ide for simple anions). Write formulae by crossing over valencies or charges, simplifying, and bracketing polyatomic ions.

Read the full lesson

Lesson 5

Properties of ionic and covalent compounds; molecular and formula unit mass

Typical properties
PropertyIonic compounds (e.g. sodium chloride, copper sulfate)Covalent compounds (e.g. camphor, naphthalene, sugar)
Solubility in waterGenerally solubleOften insoluble (camphor, naphthalene); some dissolve (sugar)
Solubility in kerosene or petrolGenerally insolubleMany dissolve (camphor, naphthalene)
Conduct as a solid?No: ions are fixed in placeNo
Conduct when dissolved in water or molten?Yes: ions are free to moveNo: no ions are produced (sugar solution does not conduct)
Melting and boiling pointsGenerally high (strong attraction between ions)Usually low

Ionic versus covalent

  • Ionic
    • Formed by transfer of electrons
    • Ions in a crystal, no molecules
    • High melting points
    • Conduct when dissolved or molten
  • Covalent
    • Formed by sharing electrons
    • Made of molecules
    • Usually low melting points
    • Do not conduct electricity

Molecular mass = sum of the atomic masses of all the atoms in one molecule (unit: u). Use it for covalent compounds.

Formula unit mass = sum of the atomic masses of all the atoms in one formula unit of an ionic compound. Multiply everything inside a bracket by the number outside it.

Calculating a formula unit mass

  1. Write the formula For example Al₂(SO₄)₃.
  2. Count each kind of atom Al 2; S 1 × 3 = 3; O 4 × 3 = 12.
  3. Multiply by atomic masses 27 × 2 = 54; 32 × 3 = 96; 16 × 12 = 192.
  4. Add 54 + 96 + 192 = 342 u.

Key takeaways: Ionic compounds are usually soluble in water, have high melting points, and conduct electricity only when dissolved or molten, when their ions can move. Covalent compounds usually have low melting points and do not conduct. Molecular mass (covalent) and formula unit mass (ionic) are both found by adding the atomic masses of all the atoms in the formula.

Read the full lesson

Privacy · Terms · Refunds · Delivery