Revision notes

Chapter 2 Shaping of the Earth's Surface: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Inside the Earth and the theory of plate tectonics

The Earth's interior (approximate values)
LayerDescriptionApproximate thickness (as shown in the textbook)
CrustOutermost layerAbout 30–40 km under continents; 5–7 km under oceans
LithosphereCrust + upper mantle; rigid; broken into platesAbout 100 km
AsthenosphereHot, partly molten, mobileAbout 200 km
MantleThick, hot, mostly solidAbout 2,900 km
Outer coreFluid; mainly iron and nickelAbout 2,200 km
Inner coreSolid, very hot, densest partAbout 1,250 km

From the surface to the centre

  1. Crust
  2. Upper mantle (with crust = lithosphere)
  3. Asthenosphere
  4. Lower mantle
  5. Outer core (fluid)
  6. Inner core (solid)

Plate tectonics: the lithosphere is broken into plates that move slowly over the asthenosphere, and their movement shapes mountains, ocean basins, earthquakes and volcanoes.

Convection currents in the mantle

  1. Heat from the core warms mantle material
  2. Warm material rises
  3. It spreads sideways under the plates, dragging them
  4. It cools and sinks
  5. It is heated again

Then back to step 1: Heat from the core warms mantle material

Key takeaways: The Earth has a crust, mantle and core (fluid outer, solid inner). The crust and upper mantle form the rigid lithosphere, which rests on the partly molten asthenosphere. The lithosphere is broken into continental, oceanic and mixed plates, including seven major plates, moving a few centimetres a year. Convection currents in the mantle, driven by heat from the core, move the plates.

Read the full lesson

Lesson 2

Plate boundaries, earthquakes and volcanoes

Types of plate boundaries

  • Convergent Plates move towards each other
    • Continent meets continent: fold mountains (the Himalaya)
    • Ocean plate meets continent: ocean plate sinks beneath
    • Volcanoes and earthquakes
  • Divergent Plates move apart
    • Magma rises and forms new crust
    • Mid-ocean ridges
    • Example: Mid-Atlantic Ridge
  • Transform Plates slide past each other
    • Crust neither created nor destroyed
    • Mainly earthquakes
    • Example: San Andreas Fault, USA

Convergent boundaries build mountains and volcanoes, divergent boundaries create new crust, and transform boundaries mainly cause earthquakes.

From plate movement to disaster planning

  1. Plates move
  2. Stress builds at boundaries
  3. Earthquakes and volcanic eruptions
  4. Map the prone zones
  5. Plan safe buildings and preparedness

Key takeaways: At convergent boundaries plates collide: continent-continent collisions form fold mountains like the Himalaya; oceanic plates sink beneath continental ones, causing volcanoes and earthquakes. At divergent boundaries plates separate and new crust forms mid-ocean ridges (Mid-Atlantic Ridge). At transform boundaries plates slide past, causing earthquakes (San Andreas Fault). Most earthquakes and volcanoes lie along boundaries, especially the Pacific Ring of Fire.

Read the full lesson

Lesson 3

Weathering, erosion and the agents of gradation

Types of weathering

  • Physical Rocks break into pieces
    • Heating and cooling
    • Frost (water freezing in cracks)
    • Wind
  • Chemical Minerals change by reaction
    • Water
    • Air
    • Acids in rain
  • Biological Living things break rocks
    • Plant roots growing into cracks
    • Animals and micro-organisms

Weathering breaks rocks down where they are; erosion wears material away and carries it somewhere else.

Traditional ways to reduce erosion
MethodHow it works
Contour trenchesTrenches dug along contour lines hold rainwater, slow run-off and let water soak in
BundingEarthen embankments along contours slow run-off and keep soil moist
TerracingLevel steps cut into a hillside stop soil from washing down
Check damsSmall barriers across streams slow water and let sediment settle

How agents of gradation level the land

  1. Erode high ground
  2. Transport the material
  3. Deposit it in low areas
  4. Surface gradually levelled
Classifying processes
ObservationProcessReason
A rock on a hilltop cracks after many hot days and cold nightsPhysical weatheringBroken in place by temperature change
A tree root splits a boulderBiological weatheringBroken in place by a living thing
Topsoil is blown off a dry field in a stormWind erosionMaterial is carried away
A riverbank is cut back during floodsWater erosionMaterial is worn and carried away

Key takeaways: Weathering breaks rocks in place (physical, chemical, biological) and helps form soil; erosion wears material away and transports it (water, wind, glacial, coastal). Erosion harms farming, housing, mining, tourism and fishing; contouring, bunding, terracing, check dams and the Zabo system reduce it. The agents of gradation (running water, glaciers, wind, waves, groundwater) erode, transport and deposit, levelling the land.

Read the full lesson

Lesson 4

Landforms made by rivers and by sea waves

Landforms along a river's course

  1. Upper course Steep slope, fast water: V-shaped valleys, waterfalls, rapids
  2. Middle course Gentler slope: meanders, oxbow lakes, floodplains
  3. Lower course Slow water, heavy deposition: deltas, levees, alluvial fans

How an oxbow lake forms

  1. Outer bank eroded, inner bank built up
  2. Bend grows into a tight loop
  3. Neck of the loop narrows
  4. Flood cuts across the neck
  5. Old loop left behind as an oxbow lake

Erosion dominates in a river's upper course, a balance of erosion and deposition shapes the middle course, and deposition dominates in the lower course.

Landforms of coastal erosion
Coastal erosion landformHow it forms
Sea cliffWaves undercut the base of the coast, leaving a steep rock face
Wave-cut (shore) platformA flat rocky area left as the cliff retreats
Sea caveWaves erode a weak part of the rock
Sea archCaves on opposite sides of a headland meet
Sea stackAn arch collapses, leaving an isolated pillar of rock

From headland to stack

  1. Waves attack a headland
  2. Cave forms in weak rock
  3. Caves on both sides meet: arch
  4. Arch roof collapses
  5. Stack left standing

Key takeaways: Rivers erode, transport and deposit. The upper course has V-shaped valleys, waterfalls and rapids; the middle course meanders, oxbow lakes and floodplains; the lower course deltas, levees and alluvial fans. Waterfalls form where hard rock overlies softer rock; oxbow lakes are cut-off meanders; deltas form at river mouths. Waves deposit beaches and sand bars and erode cliffs, platforms, caves, arches and stacks.

Read the full lesson

Lesson 5

Glaciers, wind, underground water and landform disasters

Landforms by agent

  • Glaciers
    • U-shaped valley, cirque, arête
    • Hanging valley, fjord
    • Moraines: lateral, medial, terminal
  • Wind
    • Yardang, ventifact
    • Deflation hollow, oasis, desert pavement
    • Dunes: barchan, longitudinal, star, parabolic
  • Underground water
    • Caves, sinkholes
    • Stalactites (hang down), stalagmites (rise up)
    • Underground rivers

Stalactites hang down from the ceiling of a cave; stalagmites grow up from its floor.

Disasters linked to landforms
DisasterMain causesWays to reduce risk (general measures)
LandslideHeavy rain soaking slopes; earthquakes; steep slopes with loose rock; deforestation, mining, road-cutting and unplanned building; poor drainagePlant trees, build retaining walls and drains, avoid building on unstable slopes
AvalancheHeavy snowfall in a short time; weak snow layers; sudden warming; wind-piled snow; earthquakes, skiing, trekking or constructionWarnings and closures, snow barriers, careful route planning
Glacial lake outburst flood (GLOF)Glacier melt filling lakes held by ice or loose moraine dams; heavy rain or snow; earthquakes, avalanches or landslides breaking the damMonitoring lakes, early warning systems, controlled draining
Dust stormStrong winds over dry, loose soil; drought; little vegetation from deforestation or overgrazing; extreme weatherShelter belts of trees, keeping ground covered, warnings

How a glacial lake outburst flood happens

  1. Glaciers melt as temperatures rise
  2. Glacial lake grows behind an ice or moraine dam
  3. Pressure, heavy rain, or a landslide or avalanche hits the lake
  4. Dam fails suddenly
  5. Flood rushes downstream

Key takeaways: Glaciers carve U-shaped valleys, cirques, arêtes, hanging valleys and fjords and deposit moraines. Wind forms yardangs, ventifacts, deflation hollows, oases, desert pavements and dunes (barchan, longitudinal, star, parabolic). Underground water in limestone forms karst: caves, stalactites, stalagmites, sinkholes and underground rivers. Landslides, avalanches, GLOFs and dust storms have natural and human causes, and their risk can be reduced by planning, monitoring and protecting vegetation.

Read the full lesson

Privacy · Terms · Refunds · Delivery