Revision notes

Coordinate Geometry: Foundation

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

The coordinate plane and the distance formula

QuadrantSign of xSign of yExample point
First (I)++(3, 2)
Second (II)−+(−3, 2)
Third (III)−−(−3, −2)
Fourth (IV)+−(3, −2)

Distance formula: AB = √[(x₂ − x₁)² + (y₂ − y₁)²]. The distance of P(x, y) from the origin is √(x² + y²).

Key takeaways: a point is an ordered pair (x, y); the signs of x and y tell you the quadrant. The distance formula is Pythagoras' theorem in coordinates. Square the differences, add, and take the square root. When a distance gives an equation, square both sides and expect two answers.

Read the full lesson

Lesson 2

Section formula, midpoint and area of a triangle

Section formula (internal, ratio m : n): P = ((m x₂ + n x₁)/(m + n), (m y₂ + n y₁)/(m + n)). Midpoint (ratio 1 : 1): ((x₁ + x₂)/2, (y₁ + y₂)/2).

Area = ½ |x₁(y₂ − y₃) + x₂(y₃ − y₁) + x₃(y₁ − y₂)|. If this is 0, the three points lie on one straight line (they are collinear).

Key takeaways: in the section formula, the ratio numbers cross over (m goes with the second point). The midpoint averages two points and the centroid averages three. The area formula needs the absolute value and the ½. Zero area means collinear, which is the quickest test for three points on a line.

Read the full lesson

Lesson 3

Slope, parallel and perpendicular lines

Two non-vertical lines with slopes m₁ and m₂ are parallel if m₁ = m₂, and perpendicular if m₁ × m₂ = −1, that is m₂ = −1/m₁.

tan θ = |(m₂ − m₁)/(1 + m₁m₂)|, where θ is the acute angle between the lines (1 + m₁m₂ ≠ 0).

Key takeaways: slope = rise/run = tan(inclination). Horizontal lines have slope 0 and vertical lines have none. Equal slopes mean parallel; slopes multiplying to −1 mean perpendicular. The acute angle between two lines comes from tan θ = |(m₂ − m₁)/(1 + m₁m₂)|.

Read the full lesson

Lesson 4

Equations of a line and distance from a line

FormEquationUse it when you know
Point-slopey − y₁ = m(x − x₁)one point (x₁, y₁) and the slope m
Two-pointy − y₁ = [(y₂ − y₁)/(x₂ − x₁)](x − x₁)two points
Slope-intercepty = mx + cthe slope m and the y-intercept c
Interceptx/a + y/b = 1the x-intercept a and the y-intercept b (both non-zero)
GeneralAx + By + C = 0any line; A and B not both zero

Distance of (x₁, y₁) from Ax + By + C = 0: d = |Ax₁ + By₁ + C| / √(A² + B²). Distance between parallel lines Ax + By + C₁ = 0 and Ax + By + C₂ = 0: d = |C₁ − C₂| / √(A² + B²).

Key takeaways: choose the form that matches the information given, then convert to Ax + By + C = 0. The slope of Ax + By + C = 0 is −A/B. Substitute given points to check. Use d = |Ax₁ + By₁ + C| / √(A² + B²) for the distance from a point, and match coefficients before using the parallel-lines formula.

Read the full lesson

Lesson 5

The circle

Circle with centre (h, k) and radius r: (x − h)² + (y − k)² = r². With centre at the origin: x² + y² = r².

For x² + y² + 2gx + 2fy + c = 0: centre (−g, −f), radius √(g² + f² − c), which is a real circle only when g² + f² − c > 0.

Key takeaways: a circle is all points at distance r from a centre (h, k), so (x − h)² + (y − k)² = r². In the general form x² + y² + 2gx + 2fy + c = 0 the centre is (−g, −f) and the radius √(g² + f² − c). Read the signs carefully, remember that r² is not r, and compare distances with the radius to place a point.

Read the full lesson

Lesson 6

Classifying triangles and quadrilaterals with coordinates

FigureTest with coordinates
Parallelogramthe midpoints of the diagonals AC and BD coincide (A + C = B + D), or opposite sides are equal
Rectanglea parallelogram whose diagonals are equal in length
Rhombusa parallelogram whose adjacent sides are equal (equivalently, whose diagonals are perpendicular)
Squarea parallelogram with equal diagonals and equal adjacent sides

Parallelogram: diagonals bisect each other. Rectangle: also equal diagonals. Rhombus: also equal adjacent sides. Square: both. To find the fourth vertex of parallelogram ABCD, use D = A + C − B.

Key takeaways: compare squared side lengths to classify a triangle, and use a² + b² = c² for a right angle. For a quadrilateral, begin with the midpoints of the diagonals to test for a parallelogram, then check diagonal lengths for a rectangle and side lengths for a rhombus. Always list the vertices in order around the figure.

Read the full lesson

Lesson 7

Where two lines meet: intersection points and triangles formed by lines

SituationSlopesWhat happens
Lines crossdifferentexactly one common point
Parallel, differentequalno common point
Same lineequal, same interceptevery point is common

To find where two lines meet, solve the two equations together. Always check the answer in both equations. Equal slopes with different intercepts mean no intersection.

Key takeaways: the intersection of two lines is the solution of their equations together. Equal slopes mean parallel (or the same line). For a triangle formed by three lines, find the three pairwise intersections and then use the area formula or base times height. Check every point in both equations.

Read the full lesson

Lesson 8

Finding a locus: from a condition to an equation

Locus: put P = (x, y), turn the rule into an equation, and simplify. A fixed distance from a point is a circle, equal distances from two points give a line (the perpendicular bisector), and a fixed sum of squared distances to two points is a circle.

Key takeaways: take a general point (x, y), write the condition, square and simplify. Equal distances from two points give a line; a fixed distance or a fixed sum of squared distances gives a circle. State the shape, and any excluded points.

Read the full lesson

Lesson 9

The parabola: focus, directrix and the equation y² = 4ax

Parabola y² = 4ax (a > 0): vertex (0, 0), axis the x-axis, focus (a, 0), directrix x = −a, latus rectum of length 4a with ends (a, 2a) and (a, −2a). For any point (x₁, y₁) on it, the distance from the focus is x₁ + a.

EquationOpensFocusDirectrix
y² = 4axright(a, 0)x = −a
y² = −4axleft(−a, 0)x = a
x² = 4ayup(0, a)y = −a
x² = −4aydown(0, −a)y = a

Key takeaways: the parabola is the set of points equidistant from the focus and the directrix. For y² = 4ax the focus is (a, 0), the directrix is x = −a and the latus rectum is 4a. Match the given equation with 4a to find a, and use the squared variable and the sign to find the axis and direction.

Read the full lesson

Privacy · Terms · Refunds · Delivery