Revision notes

Coordinate Geometry: Practice

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Points at exam speed: section, centroid and area

External division in the ratio m : n: P = ((m x₂ − n x₁)/(m − n), (m y₂ − n y₁)/(m − n)). Internal: plus signs and m + n.

Traps to avoid: external division uses minus signs; a negative k means the point is outside the segment; a given area gives two equations; vertices must be taken in order around the figure.

Key takeaways: use the ratio k : 1 when the ratio is unknown. Reverse the centroid formula to recover a vertex. Solve both cases of an area equation. For quadrilaterals keep the vertices in cyclic order.

Read the full lesson

Lesson 2

Slopes and angles between lines

tan θ = |(m₂ − m₁)/(1 + m₁m₂)|. If 1 + m₁m₂ = 0 the lines are perpendicular (θ = 90°); if m₁ = m₂ they are parallel (θ = 0°).

Key takeaways: read slopes as −A/B. Use the formula with the absolute value for the acute angle, and inclinations when a line is vertical. An angle condition on an unknown slope gives two slopes. Perpendicular slopes multiply to −1; equal slopes mean parallel or, for lines through a common point, collinear points.

Read the full lesson

Lesson 3

Equations of lines: parallels, perpendiculars, foot and image

A line parallel to Ax + By + C = 0 is Ax + By + k = 0. A line perpendicular to it is Bx − Ay + k = 0. Find k from the point the line must pass through.

Key takeaways: keep A and B and change only the constant for parallels; swap them and change one sign for perpendiculars. Normal form needs a positive right side before dividing by √(A² + B²). Foot and image both use t = −(Ax₁ + By₁ + C)/(A² + B²); the image uses 2t. Absolute values in distance conditions give two answers.

Read the full lesson

Lesson 4

Circles from conditions

Circle on the segment joining (x₁, y₁) and (x₂, y₂) as diameter: (x − x₁)(x − x₂) + (y − y₁)(y − y₂) = 0.

Key takeaways: use the diameter form when two ends are given. Two points on the circle give an equal-distance equation for the centre. Three points give three linear equations; a point at the origin gives c = 0 at once. Touching an axis fixes r as |k| or |h|. The sign of S(x₁, y₁) tells you inside, on or outside.

Read the full lesson

Lesson 5

Parabola, ellipse and hyperbola in standard position

Parabolas with vertex at the origin (a > 0); latus rectum 4a in every case
EquationFocusDirectrixOpens
y² = 4ax(a, 0)x = −aright
y² = −4ax(−a, 0)x = aleft
x² = 4ay(0, a)y = −aup
x² = −4ay(0, −a)y = adown

Ellipse: c² = a² − b², e = c/a < 1. Hyperbola: c² = a² + b², e = c/a > 1. Both: latus rectum 2b²/a. Parabola y² = 4ax: focus (a, 0), directrix x = −a, latus rectum 4a, e = 1.

Key takeaways: for a parabola, read 4a from the equation and the direction from the squared variable and the sign. For an ellipse, the larger denominator is a² and c² = a² − b². For a hyperbola, the positive term decides the axis and c² = a² + b². Eccentricity c/a is 1 for a parabola, below 1 for an ellipse and above 1 for a hyperbola.

Read the full lesson

Lesson 6

Triangle centres: centroid, circumcentre, orthocentre and incentre

CentreDefined byHow to find it
Centroid Gmediansaverage of the vertices
Circumcentre Operpendicular bisectors of the sidesequal distances to A, B, C: two linear equations
Orthocentre Haltitudesintersect two altitudes (use perpendicular slopes)
Incentre Iangle bisectorsI = (ax₁ + bx₂ + cx₃, ay₁ + by₂ + cy₃)/(a + b + c)

Centroid: average. Circumcentre: equal distances. Orthocentre: altitudes. Incentre: weights a, b, c (opposite sides). Check: H = 3G − 2O, because G divides the segment OH in the ratio 1 : 2. In a right triangle the circumcentre is the midpoint of the hypotenuse and the orthocentre is the right-angle vertex.

Key takeaways: the centroid averages the vertices; the circumcentre solves two equidistance equations; the orthocentre intersects two altitudes; the incentre weights vertices by the opposite sides. H, G, O are collinear with H = 3G − 2O.

Read the full lesson

Lesson 7

Tangents and normals to a circle

QuestionResult
Tangent at (x₁, y₁) to x² + y² = r²xx₁ + yy₁ = r²
Tangent at (x₁, y₁) to x² + y² + 2gx + 2fy + c = 0xx₁ + yy₁ + g(x + x₁) + f(y + y₁) + c = 0
Normal at a point of a circlethe line through the point and the centre
Length of the tangent from (x₁, y₁)√S₁, where S₁ = x₁² + y₁² + 2gx₁ + 2fy₁ + c (S₁ > 0 means outside)
Tangents with slope m to x² + y² = r²y = mx ± r√(1 + m²)

A line touches a circle exactly when the distance from the centre to the line equals the radius. Tangent ⟂ radius; normal through the centre; length of tangent from a point = √S₁.

Key takeaways: the tangent is perpendicular to the radius; the normal goes through the centre. Use the replacement rule (xx₁, yy₁, half-sums) for the tangent at a point, √S₁ for the length from outside, and 'distance from the centre = radius' for tangents from a point.

Read the full lesson

Lesson 8

Tangents to a parabola, ellipse and hyperbola

ConicTangent at (x₁, y₁)Tangent y = mx + c touches when
Parabola y² = 4axyy₁ = 2a(x + x₁)c = a/m (m ≠ 0)
Ellipse x²/a² + y²/b² = 1xx₁/a² + yy₁/b² = 1c² = a²m² + b²
Hyperbola x²/a² − y²/b² = 1xx₁/a² − yy₁/b² = 1c² = a²m² − b²

Point form: replace x² by xx₁, y² by yy₁ and 2x by x + x₁ (and so on). Slope form: substitute y = mx + c and make the discriminant zero. The ± sign in c gives two parallel tangents of slope m.

Key takeaways: use the point form when you are given a point on the conic and the slope form when you are given a slope. The conditions are c = a/m, c² = a²m² + b² and c² = a²m² − b². Verify by substituting and finding a zero discriminant.

Read the full lesson

Lesson 9

Locus problems at exam speed: midpoints, ratios and conics

Rule for PLocus
PA = PBperpendicular bisector (line)
PA = k PB, k ≠ 1circle
PA² + PB² = constantcircle about the midpoint of AB (when the constant > AB²/2)
PA + PB = 2a > ABellipse with foci A, B
|PA − PB| = 2a < ABhyperbola with foci A, B
distance from a point = distance from a lineparabola

Midpoint or dividing point of a moving segment: let the moving point Q = (x′, y′) on its own curve, write P = (x, y) in terms of Q, solve for x′ and y′, and substitute into Q's equation.

Key takeaways: recognise the shape from the rule, use the focus–directrix definition for a parabola, and use the substitution Q = function of P for midpoints and dividing points. Always use absolute values when the rule involves a distance to a line or an area.

Read the full lesson

Privacy · Terms · Refunds · Delivery