Revision notes

Limits and Continuity: Foundation

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

What a limit means

Values of (x² − 1)/(x − 1) near x = 1
x0.90.990.9991.0011.011.1
f(x)1.91.991.9992.0012.012.1

lim(x→a) f(x) = L means: as x gets closer and closer to a (from both sides, with x ≠ a), f(x) gets closer and closer to L. What happens exactly at x = a does not affect the limit.

Key takeaways: a limit describes the value a function approaches, not the value it takes. Approach from both sides and ignore the point itself. A 0/0 result on substitution does not mean the limit fails to exist; it means you must simplify first. For unbroken graphs such as straight lines, the limit simply equals the value of the function.

Read the full lesson

Lesson 2

Left-hand and right-hand limits

lim(x→a) f(x) exists if and only if the left-hand limit and the right-hand limit both exist and are equal. Their common value is the limit.

The greatest integer function near x = 2
x1.51.91.9922.012.5
[x]111222

Key takeaways: work out each side separately, using the part of the formula that applies on that side. The limit exists only when LHL = RHL. The function |x|/x and the function [x] at an integer are standard examples where the two sides disagree. At a non-integer point, [x] behaves like a constant.

Read the full lesson

Lesson 3

Algebra of limits and the 0/0 form

First substitute. A number (with a non-zero denominator) is the answer. A 0/0 is a signal to simplify: factorise polynomials, multiply by the conjugate for square roots, then substitute again.

Key takeaways: limits of sums, differences, products and quotients can be found piece by piece. Polynomials and rational functions with a non-zero denominator are found by substitution. The form 0/0 means more work is needed: factorise or rationalise, cancel (x − a), and substitute again.

Read the full lesson

Lesson 4

Standard limits to remember

Standard limits
LimitValueCondition
(xⁿ − aⁿ)/(x − a), x → an aⁿ⁻¹n a positive integer
sin x / x, x → 01x in radians
tan x / x, x → 01x in radians
(1 + x)^(1/x), x → 0e
(aˣ − 1)/x, x → 0ln aa > 0
(eˣ − 1)/x, x → 01
ln(1 + x)/x, x → 01natural logarithm

sin x / x → 1 (radians), (1 + x)^(1/x) → e, (aˣ − 1)/x → ln a and (xⁿ − aⁿ)/(x − a) → n aⁿ⁻¹. To use them, make the expression match the standard form exactly, for example by multiplying and dividing by a constant.

Key takeaways: learn the table of standard limits and the conditions attached to them, especially radians for trigonometric limits. Adjust the expression so that the quantity inside the function matches the denominator. These limits will be used again to differentiate sin x, eˣ and ln x.

Read the full lesson

Lesson 5

Continuity at a point

f is continuous at a when LHL = RHL = f(a). Check all three: the left-hand limit, the right-hand limit and the value at the point.

Key takeaways: continuity at a point needs a defined value, a limit (LHL = RHL), and the two must agree. A removable discontinuity has a limit that disagrees with the value; a jump has unequal one-sided limits; an infinite discontinuity blows up. |x| is continuous everywhere, while [x] breaks at every integer.

Read the full lesson

Lesson 6

Limits as x tends to infinity

Divide the top and bottom by the highest power of x. Equal degrees: the ratio of leading coefficients. Top of lower degree: the limit is 0. Top of higher degree: the values grow without bound, so there is no finite limit.

Key takeaways: 1/xⁿ → 0 as x → ±∞. For a rational function, divide by the highest power of x in the denominator. Equal degrees give the ratio of the leading coefficients, a lower-degree top gives 0, and a higher-degree top gives unbounded values. The limit gives the horizontal asymptote.

Read the full lesson

Lesson 7

Infinite limits and vertical asymptotes

When the denominator tends to 0 and the numerator tends to a non-zero number, the fraction grows without bound. Its sign is decided by the signs of the numerator and the (small) denominator on that side.

Key takeaways: a non-zero numerator over a denominator tending to 0 grows without bound; find the sign from each side; the limit is ±∞ only as a description of the behaviour. A vertical asymptote is at a zero of the denominator that does not cancel. A cancelled factor leaves a hole, not an asymptote.

Read the full lesson

Lesson 8

Using sin x / x: sine, tangent and cosine limits

lim sin(ax)/(bx) = a/b and lim tan(ax)/(bx) = a/b as x → 0. For cosine, use 1 − cos x = 2 sin²(x/2): lim (1 − cos x)/x² = 1/2.

Limit as x → 0Value
sin(ax)/(bx)a/b
tan(ax)/(bx)a/b
(1 − cos x)/x²1/2
(1 − cos x)/x0
x cot x1
sin(x²)/x²1

Key takeaways: make the angle inside the sine match the denominator, multiplying and dividing by the right constant; lim sin(ax)/(bx) = a/b; for 1 − cos x use 2 sin²(x/2) to get 1/2 for (1 − cos x)/x². All of these apply with x in radians and tending to 0.

Read the full lesson

Lesson 9

Continuity on an interval and building continuous functions

FunctionContinuous on
polynomialall real numbers
sin x, cos x, eˣall real numbers
|x|all real numbers
rational function P(x)/Q(x)every x with Q(x) ≠ 0
√x[0, ∞)
ln x(0, ∞)
tan xevery x except π/2 + nπ

Sums, differences, products and composites of continuous functions are continuous. A quotient is continuous wherever the denominator is not zero. So find continuity by finding where the formula is defined.

Key takeaways: polynomials, sin, cos, eˣ and |x| are continuous everywhere; rational functions are continuous where the denominator is not zero; sums, products and composites keep continuity. A quotient needs the denominator non-zero. If a continuous function changes sign on [a, b], it has a root in between.

Read the full lesson

Privacy · Terms · Refunds · Delivery