Revision notes

Three-Dimensional Geometry: Practice

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Angles between lines: perpendicular and parallel at exam speed

Angle between lines: cos θ = |a₁a₂ + b₁b₂ + c₁c₂| / (√(a₁² + b₁² + c₁²) × √(a₂² + b₂² + c₂²)). Perpendicular: a₁a₂ + b₁b₂ + c₁c₂ = 0. Parallel: a₁/a₂ = b₁/b₂ = c₁/c₂ (a zero in one set must match a zero in the same place in the other).

Key takeaways. Read directions from the standard form only, simplify them, and test the sum of products before anything else. Perpendicular gives a linear or quadratic condition on an unknown; parallel gives equal ratios, which must agree before you solve for k.

Read the full lesson

Lesson 2

Foot of the perpendicular and distance from a point to a line

Foot: Q = A + λb with PQ · b = 0, which gives λ = (AP · b)/|b|². Distance: |PQ|, or directly √(|AP|² − (AP · b)²/|b|²), or |AP × b|/|b|. Image: 2Q − P.

Key takeaways. Write the general point, make PQ perpendicular to the direction, and read the foot, distance and image from one value of λ. For the distance alone, use |AP|² minus the square of the projection.

Read the full lesson

Lesson 3

Shortest distance between two lines: the standard cases

Choosing the method
DirectionsTriple product (a₂ − a₁) · (b₁ × b₂)The lines areShortest distance
Proportionalnot neededparallel (or the same line)|b × (a₂ − a₁)|/|b|
Not proportionalzerointersecting0
Not proportionalnon-zeroskew|(a₂ − a₁) · (b₁ × b₂)|/|b₁ × b₂|

Skew lines: d = |(a₂ − a₁) · (b₁ × b₂)| / |b₁ × b₂|. Parallel lines with direction b: d = |b × (a₂ − a₁)| / |b|. Here a₁ and a₂ are points on the lines and b₁, b₂ their directions.

Key takeaways. Classify the pair first: proportional directions mean the parallel formula, a zero triple product means the lines meet, and anything else is skew. Simplify the cross product before using it, and check parallel lines for being the same line.

Read the full lesson

Lesson 4

Planes: three points, intercepts and distances

Distance of (x₁, y₁, z₁) from Ax + By + Cz + D = 0: |Ax₁ + By₁ + Cz₁ + D| / √(A² + B² + C²). Parallel planes Ax + By + Cz + D₁ = 0 and Ax + By + Cz + D₂ = 0, with the same A, B, C: |D₁ − D₂| / √(A² + B² + C²).

Key takeaways. A cross product gives the normal for three points; points on the axes give the intercept form at once. For distances, put the plane in the form … = 0, and match the coefficients of parallel planes before subtracting the constants.

Read the full lesson

Lesson 5

Angles with planes: line and plane, plane and plane

Line and line, plane and plane: cosine. Line and plane: sin φ = |b · n| / (|b||n|). Line parallel to the plane: b · n = 0. Line perpendicular to the plane: b proportional to n.

Key takeaways. Every angle with a plane goes through the normal. Planes use the cosine of the angle between normals; a line and a plane use the sine. b · n = 0 means the line is parallel to the plane, while b proportional to n means it is perpendicular to it.

Read the full lesson

Lesson 6

Line meets plane: the point of intersection, the foot of the perpendicular and the image in a plane

Foot: Q = P − tn, with t = (n · P − d)/|n|². Image: P′ = P − 2tn. Line and plane: substitute the general point and solve for λ; if the λ-coefficient vanishes, the line is parallel.

Key takeaways. Substituting the general point turns a line and a plane into one equation in λ. If the coefficient of λ is zero, look at the constant to separate 'lies in' from 'parallel'. The foot uses the normal as direction, and the image doubles the move from the point to its foot.

Read the full lesson

Lesson 7

The line of intersection of two planes, and the family of planes through it

Direction of the common line = n₁ × n₂. Planes through the line: P₁ + λP₂ = 0. Use the extra condition to find λ.

Key takeaways. A line of intersection has direction n₁ × n₂; a point comes from fixing one coordinate. The family P₁ + λP₂ = 0 gives all planes through the line, and one condition on the plane fixes λ. Parallel to an axis means that coordinate's coefficient is zero.

Read the full lesson

Lesson 8

Coplanar lines, and the plane through a line and a point or parallel to two lines

Coplanar: (a₂ − a₁) · (b₁ × b₂) = 0. The normal of a plane containing two directions is their cross product. Always check that your plane contains the given points.

Key takeaways. Compute a₂ − a₁ and b₁ × b₂ first; a zero scalar triple product means the lines are coplanar. The normal of a plane through two directions is their cross product. For a point and a line, use the direction of the line and the vector from a point on the line to P.

Read the full lesson

Lesson 9

Mixed practice: lines and planes from conditions, and the choice of cross product

Required objectIts direction or normalCross product of
Line perpendicular to two linesDirectionThe two line directions
Line parallel to two planesDirectionThe two plane normals
Plane parallel to two linesNormalThe two line directions
Plane perpendicular to two planesNormalThe two plane normals
Line perpendicular to a planeDirectionThe plane's normal, no cross product
Plane perpendicular to a lineNormalThe line's direction, no cross product

Perpendicular to two vectors means their cross product. Choose the vectors that the new object must be perpendicular to: directions for a line to be perpendicular to, normals for a line to be parallel to a plane.

Key takeaways. First decide what the new object must be perpendicular to, then take one cross product. When a line must meet another line, use its general point and one dot-product condition. Always verify by substituting back.

Read the full lesson

Privacy · Terms · Refunds · Delivery