Revision notes

Mathematical Operations: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

BODMAS from the beginning: the order in which to calculate

The six steps of BODMAS
LetterStands forWhat it meansExample
BBracketsSolve what is inside ( ), { } or [ ] first, innermost first(3 + 5) × 2 = 8 × 2 = 16
OOf, or Orders'Of' means multiply (half of 10 is 5); orders are powers and roots3² + 1 = 9 + 1 = 10
DDivisionDone together with multiplication20 ÷ 4 + 1 = 5 + 1 = 6
MMultiplicationDone together with division2 + 3 × 4 = 2 + 12 = 14
AAdditionDone together with subtraction9 − 4 + 2 = 5 + 2 = 7
SSubtractionDone together with addition15 − 5 − 3 = 10 − 3 = 7

Partners go left to right

  • × and ÷
    • Partners of equal rank
    • Whichever comes first from the left is done first
    • 24 ÷ 4 × 2 = 6 × 2 = 12
  • + and −
    • Partners of equal rank
    • Whichever comes first from the left is done first
    • 10 − 4 + 3 = 6 + 3 = 9

The order of operations

  1. Brackets Innermost bracket first, then outwards.
  2. 'Of', powers, roots
  3. × and ÷ From left to right.
  4. + and − From left to right.

Brackets first, then 'of' and powers, then × and ÷ from left to right, then + and − from left to right.

  • Every mathematical operations question ends in a calculation, and BODMAS decides its order.
  • × and ÷ are partners: whichever comes first from the left is done first. The same is true of + and −.
  • Brackets always come first, starting with the innermost one.
  • Write each step on its own line; most mistakes happen when two steps are done in the head at once.
Read the full lesson

Lesson 2

Symbol substitution: when one sign stands for another

Solving a sign code

  1. Make a table Each sign of the question and its real meaning.
  2. Rewrite on a fresh line Replace every sign; never move or change the numbers.
  3. Apply BODMAS Calculate the new expression.
The code used in worked example 1
Sign in the questionWrite it as
+×
×−
−÷
÷+

'Means' or 'interchanged'?

  • '+ means ×'
    • Runs one way: see +, write ×
    • Does not turn × into + unless the question says so
  • '+ and − are interchanged'
    • A two-way swap
    • + becomes −
    • − becomes +

Make a table, rewrite every sign at once on a fresh line, keep the numbers in place, then apply BODMAS.

  • 'A means B' runs one way: see A, write B.
  • 'Interchanged' is a two-way swap of the two signs named.
  • Signs that the code does not mention keep their normal meaning.
  • Most errors come from chaining. Always rewrite from the original line, never from a half-changed one.
Read the full lesson

Lesson 3

Letters and words as codes for the four operations

A typical letter code
LetterMeaning
P+
Q−
R×
S÷

Decoding without slips

  1. Write the code table In the margin, before you start.
  2. Say each meaning 'S is divide, R is times' as you rewrite.
  3. Count the signs As many signs as code letters or words.
  4. Tick off look-alikes Mark each code word in the table after use.
  5. Then apply BODMAS A code never changes the order of operations.

A code letter or word is only a label. Look it up, write the real sign, then apply BODMAS.

Letter and word codes are symbol substitution in disguise. The danger is not the arithmetic but misreading a label, so build the table first, decode the whole line, count the signs and only then calculate. With this habit, letter codes are among the quickest marks in a reasoning paper.

Read the full lesson

Lesson 4

Missing operators: choosing the signs that balance an equation

Restoring the balance

  • Type 1: one missing sign Try each of the four signs in turn.
  • Type 2: a set of signs Fill each choice in from left to right, apply BODMAS, compare.
  • Type 3: the missing number Work out the complete side, then undo the operations on the other side.

Testing a set of signs

  1. Fill in the signs From left to right, in the order given.
  2. Apply BODMAS
  3. Compare with the other side
  4. Check Put the answer back into the equation.

Fill in the signs, apply BODMAS, compare with the other side, then check by putting the answer back.

  • The = sign is a balance; your job is to make both sides equal.
  • Signs are always filled in from left to right in the order given.
  • BODMAS applies after filling in: a correct set of signs evaluated in the wrong order looks wrong.
  • For a missing number, simplify the complete side first, then undo the steps on the other side.
Read the full lesson

Lesson 5

Defined operations: following a new rule such as a @ b

Using a defined rule

  1. Copy the rule For example a @ b = 2a + b.
  2. Match the letters a is the number before the symbol, b the number after it.
  3. Put in the numbers ab means a × b; a² means a × a.
  4. Calculate BODMAS still applies inside the rule.

Order matters: a @ b = 2a + b

  • 3 @ 5
    • a = 3, b = 5
    • 2 × 3 + 5 = 11
  • 5 @ 3
    • a = 5, b = 3
    • 2 × 5 + 3 = 13
Rules used in this lesson
RuleExampleWorking
a @ b = 2a + b2 @ 32 × 2 + 3 = 7
a # b = a² − b5 # 725 − 7 = 18
a $ b = ab + a4 $ 312 + 4 = 16

Copy the rule, put the first number in place of a and the second in place of b, and always work out the innermost bracket first.

  • A defined operation is only a recipe; read the recipe, then follow it exactly.
  • a is the number before the symbol and b the number after it; swapping them usually changes the answer.
  • ab means a × b and a² means a × a; inside the rule, BODMAS still applies.
  • With brackets, replace the inner operation by its value before using the rule again.
Read the full lesson

Privacy · Terms · Refunds · Delivery