Revision notes

Chapter 5 Co-ordinate Geometry: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

The distance formula

Distance formula: d(A, B) = √[(x₂ − x₁)² + (y₂ − y₁)²]. The distance of P(x, y) from the origin is √(x² + y²).

— Distance formula

Using the distance formula

  1. Name the points (x₁, y₁) and (x₂, y₂); either order works.
  2. Find the differences x₂ − x₁ and y₂ − y₁, keeping signs inside brackets.
  3. Square and add Squares are never negative.
  4. Take the square root Simplify the surd if needed.
Common slips
SlipCorrect way
Subtracting a negative: 4 − (−2) = 24 − (−2) = 6
Squaring −5 as −25(−5)² = 25
Adding under the root before squaringSquare each difference first, then add
Writing √(36 + 64) = 6 + 8√100 = 10

Key takeaways: for points on a line parallel to an axis, subtract the co-ordinates that change. In general, d = √[(x₂ − x₁)² + (y₂ − y₁)²], which is the Pythagoras theorem applied to the horizontal and vertical gaps. Watch the signs of negative co-ordinates.

Read the full lesson

Lesson 2

Using the distance formula: collinearity, shapes and unknown points

What to check
ShapeTest with distances
Right triangleSquare of the longest side = sum of squares of the other two
Equilateral triangleAll three sides equal
ParallelogramBoth pairs of opposite sides equal
RhombusAll four sides equal
RectangleOpposite sides equal and diagonals equal
SquareAll four sides equal and diagonals equal

Collinear: two distances add up to the third. Equidistant: set the squared distances equal. A square root equation can have two answers (±).

— Applications of the distance formula

Key takeaways: compare distances to test collinearity and to classify shapes; for squares and rectangles also compare the diagonals. Use squared distances when finding equidistant points or circumcentres, and remember the ± when solving for an unknown co-ordinate.

Read the full lesson

Lesson 3

The section formula

Section formula: the point dividing the segment joining (x₁, y₁) and (x₂, y₂) in the ratio m : n is ((mx₂ + nx₁)/(m + n), (my₂ + ny₁)/(m + n)).

— Section formula

Three kinds of section-formula question

  • Find the point
    • Given A, B and m : n
    • Substitute directly
  • Find the ratio
    • Given A, B and P (or 'divided by an axis')
    • Write x (or y) equation in m and n
    • Check with the other co-ordinate
  • Find an end point
    • Given P, one end and the ratio
    • Solve two linear equations

Key takeaways: P = ((mx₂ + nx₁)/(m + n), (my₂ + ny₁)/(m + n)) with m next to the second point. To find a ratio, set up an equation in m and n from one co-ordinate; an axis gives x = 0 or y = 0. Always check with the other co-ordinate.

Read the full lesson

Lesson 4

Midpoint, centroid and points of trisection

Midpoint formula: the midpoint of the segment joining (x₁, y₁) and (x₂, y₂) is ((x₁ + x₂)/2, (y₁ + y₂)/2).

— Midpoint formula

Centroid formula: the centroid of the triangle with vertices (x₁, y₁), (x₂, y₂), (x₃, y₃) is ((x₁ + x₂ + x₃)/3, (y₁ + y₂ + y₃)/3).

— Centroid formula

Special cases of the section formula

  • Midpoint
    • Ratio 1 : 1
    • Average of the x's and of the y's
  • Centroid
    • Ratio 2 : 1 on a median
    • Average of three vertices
  • Trisection
    • Ratios 1 : 2 and 2 : 1
    • Equal steps of (x₂ − x₁)/3, (y₂ − y₁)/3

Key takeaways: midpoint = average of two points; centroid = average of three vertices. Use them backwards to find a missing end point or vertex. For equal parts, take equal steps along the segment or use the matching ratios.

Read the full lesson

Lesson 5

Slope of a line

The slope of the line through (x₁, y₁) and (x₂, y₂), with x₁ ≠ x₂, is m = (y₂ − y₁)/(x₂ − x₁). If the line makes an angle θ with the positive direction of the X-axis, then m = tan θ.

— Slope of a line

What the slope tells you

  • Positive slope
    • Line rises from left to right
    • Makes an acute angle with the X-axis
  • Negative slope
    • Line falls from left to right
    • Makes an obtuse angle with the X-axis
  • Zero slope
    • X-axis and lines parallel to it
    • y₂ − y₁ = 0
  • Slope not defined
    • Y-axis and lines parallel to it
    • x₂ − x₁ = 0, and division by 0 is impossible

Key takeaways: m = (y₂ − y₁)/(x₂ − x₁) = tan θ. The X-axis has slope 0 and the slope of the Y-axis is not defined. Equal slopes mean parallel lines; equal slopes through a common point mean collinear points.

Read the full lesson

Privacy · Terms · Refunds · Delivery