Revision notes

Chapter 3 Polynomials: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

What a polynomial is: degree, types and forms

Checking the powers of the variable
ExpressionPolynomial?Reason
4x³ − x + 9YesPowers 3, 1, 0 are whole numbers
√y + 3No√y = y^(1/2); the power 1/2 is not a whole number
2/m − 5No2/m = 2m⁻¹; the power −1 is not a whole number
(2/3)p² + √7YesFraction and surd coefficients are allowed

Two ways of naming a polynomial

  • By number of terms
    • Monomial: one term, e.g. 7x⁴
    • Binomial: two terms, e.g. y³ − 8
    • Trinomial: three terms, e.g. m² + 2m + 5
  • By degree (one variable)
    • Linear, degree 1: ax + b, a ≠ 0
    • Quadratic, degree 2: ax² + bx + c, a ≠ 0
    • Cubic, degree 3: ax³ + bx² + cx + d, a ≠ 0

A polynomial's variable powers are whole numbers. Degree = highest power (one variable) or highest sum of powers in a term (several variables). Coefficient form must include a 0 for every missing power.

— Polynomials in brief

Key takeaways: check that every power is a whole number before calling an expression a polynomial. The degree of a non-zero constant is 0 and the zero polynomial has no degree. Write missing powers with coefficient 0 in index form, and list all coefficients, zeros included, in coefficient form.

Read the full lesson

Lesson 2

Adding, subtracting, multiplying and dividing polynomials

The long division cycle

  1. Divide the leading terms Leading term of what is left ÷ leading term of divisor.
  2. Multiply That quotient term × the whole divisor.
  3. Subtract Take this product from what is left.
  4. Bring down and repeat Stop when what is left has smaller degree than the divisor.

Then back to step 1: Divide the leading terms

Dividend = Divisor × Quotient + Remainder, where the remainder is 0 or of lower degree than the divisor.

— Division of polynomials

Key takeaways: add and subtract by collecting like terms; 'subtract A from B' means B − A. Multiply every term by every term; the degree of a product is the sum of the degrees. In division, insert zero terms first, repeat divide–multiply–subtract, and check by multiplying back.

Read the full lesson

Lesson 3

Synthetic division

Synthetic division: bring down, multiply, add

  1. Bring down Copy the first coefficient into the third row.
  2. Multiply Multiply the latest third-row number by the number at the left.
  3. Write below Put the product in the second row under the next coefficient.
  4. Add Add the column and write the sum in the third row; repeat.

Then back to step 1: Bring down

The last number in the third row is the remainder; the others are the quotient's coefficients.
Synthetic division with 2 at the left
Rowx³x²xconstant
First row (coefficients)2−53−7
Second row (products)2 × 2 = 42 × (−1) = −22 × 1 = 2
Third row (sums)2−11−5 (remainder)

Synthetic division works only for a divisor of degree 1 of the form x − a or x + a. Use a for x − a and −a for x + a, and never forget the zeros for missing powers.

— Synthetic division
Traps to avoid
Common mistakeCorrect practice
Using +3 for divisor x + 3Use −3, the value that makes x + 3 = 0
Skipping a missing powerWrite 0 in its place in the first row
Subtracting in each columnIn synthetic division you add each column

Key takeaways: write the full coefficient form, put the value that makes the divisor zero at the left, then bring down, multiply and add. The last sum is the remainder; the rest are the quotient's coefficients, one degree lower than the dividend.

Read the full lesson

Lesson 4

Value of a polynomial and the remainder theorem

Remainder theorem: if a polynomial p(x) is divided by x + a, the remainder is p(−a). If it is divided by x − a, the remainder is p(a).

— Remainder theorem

Finding a remainder by the theorem

  1. Look at the divisor x − 3 or x + 5, say.
  2. Find the value that makes it zero x − 3 → 3; x + 5 → −5.
  3. Substitute into p(x) Work carefully with powers of negative numbers.
  4. The value is the remainder No division needed.
Which value gives the remainder
DivisorValue to substituteRemainder
x − 55p(5)
x + 1−1p(−1)
y + 3−3p(−3)
m − 11p(1)

Key takeaways: p(a) is found by substituting a for the variable in every term. The remainder on dividing p(x) by x − a is p(a), and by x + a is p(−a), because the remainder of a degree-1 division is a constant. Use a known remainder or value to set up an equation for an unknown coefficient.

Read the full lesson

Lesson 5

The factor theorem and factorising polynomials

Factor theorem: if p(a) = 0, then x − a is a factor of p(x). Conversely, if x − a is a factor of p(x), then p(a) = 0.

— Factor theorem

Using the factor theorem

  1. Write the factor as x − a x + 4 means a = −4.
  2. Find p(a) Substitute into the polynomial.
  3. p(a) = 0? Then x − a is a factor; otherwise it is not.
  4. Unknown coefficient? Set p(a) = 0 and solve for it.
Finding the split for the middle term
ExpressionProduct neededSum neededPair
x² + 7x + 121273 and 4
2x² − x − 6−12−1−4 and 3
3y² − 10y + 824−10−4 and −6

Key takeaways: x − a is a factor of p(x) exactly when p(a) = 0; for x + a test p(−a). Set p(a) = 0 to find a missing coefficient. Factorise ax² + bx + c by splitting bx using two numbers with product ac and sum b, and use a substitution when an expression repeats.

Read the full lesson

Privacy · Terms · Refunds · Delivery