Revision notes

Motion: Practice

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Distance, displacement, speed and velocity

Equal distances at two speeds: average speed = 2v₁v₂/(v₁ + v₂). Equal times at two speeds: average speed = (v₁ + v₂)/2.

— Shortcut
  • Distance and speed are scalars; displacement and velocity are vectors.
  • Average speed uses total distance; average velocity uses displacement.
  • Equal distances need the harmonic mean; equal times use the ordinary mean.
Read the full lesson

Lesson 2

Equations of uniformly accelerated motion

Stopping distance = u²/(2a). Doubling the speed makes the stopping distance four times as large.

— Remember
  • Pick the equation that leaves out the quantity you do not need.
  • Convert km/h to m/s before substituting.
  • Retardation is acceleration with a negative sign in your chosen direction.
Read the full lesson

Lesson 3

Free fall and vertical motion

From rest: distances in successive seconds are in the ratio 1 : 3 : 5 : 7. Rise time = fall time = u/g.

— Remember
  • Use g = 10 m/s² (or 9.8 m/s² if the problem says so).
  • Choose a direction as positive and keep the signs consistent.
  • On the way up and down, the speed at the same height is the same.
Read the full lesson

Lesson 4

Motion graphs

Reading motion graphs
GraphSlope givesArea under graph gives
Displacement–time (x–t)VelocityNothing useful
Velocity–time (v–t)AccelerationDisplacement
Acceleration–time (a–t)Rate of change of accelerationChange in velocity

Slope of x–t = velocity. Slope of v–t = acceleration. Area under v–t = displacement.

— Remember
  • Slope and area are the two tools; know what each stands for on each graph.
  • Split complicated areas into triangles and rectangles.
  • Displacement can be zero while distance is not.
Read the full lesson

Lesson 5

Projectile motion and relative motion

Range is maximum at 45°. Angles θ and 90° − θ give the same range. Horizontal velocity of a projectile never changes.

— Remember
  • Treat horizontal and vertical motion separately and join them through the time.
  • Maximum range at 45° for a given speed on level ground.
  • Opposite directions: add speeds; same direction: subtract.
Read the full lesson

Lesson 6

Distance in the nth second and ratio shortcuts

Distance in the nth second: s_n = u + a(2n − 1) ÷ 2. From rest: s_n ∝ (2n − 1), i.e. 1 : 3 : 5 : 7 …

— Rule to remember
  • Use s(n) − s(n − 1) or the formula s_n = u + a(2n − 1) ÷ 2 for the nth second.
  • From rest, distances in successive seconds go 1 : 3 : 5 : 7 and total distances go 1 : 4 : 9.
  • For 'last second' questions, find the number of seconds T first, then the total.
Read the full lesson

Lesson 7

Meeting, overtaking and chase problems

Gap ÷ relative speed = time. Opposite: add. Same direction: subtract. Accelerating chase: equate distances.

— Rule to remember
  • Relative speed: add for opposite directions, subtract for the same direction.
  • Head start = speed × delay; the gap shrinks at the relative speed.
  • Trains pass over the sum of their lengths.
  • A chase with acceleration needs s = ut + ½at² for each body.
Read the full lesson

Lesson 8

Two bodies in vertical motion: dropped, thrown and meeting

Take up as positive, a = −g throughout. Two roots of the time equation mean going up and coming down. Reject negative time.

— Rule to remember
  • Use one sign convention for the whole flight.
  • Free-fall bodies share the same acceleration, so their relative velocity is constant.
  • A thrown-up ball passes each height twice with equal speeds.
  • Check every quadratic answer: is the time positive and does it make sense?
Read the full lesson

Lesson 9

Multi-stage velocity-time graphs and mixed speed drills

Distance = area (absolute). Displacement = signed area. Acceleration = slope. Crossing graphs mean equal speed, not equal position.

— Rule to remember
  • Break any graph into triangles, rectangles and trapeziums, and add the areas.
  • Areas below the time axis are displacement in the reverse direction.
  • Two bodies meet when their areas (displacements) are equal, not when their speeds are equal.
Read the full lesson

Privacy · Terms · Refunds · Delivery