Revision notes

Chapter 11 Surface Areas and Volumes: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

The right circular cone: its parts and slant height

Parts of a right circular cone (triangle ABC turned about AB)

  • Vertex The point A at the top
  • Height h AB, from the vertex straight down to the centre B of the base, at right angles to the base
  • Radius r BC, the radius of the circular base
  • Slant height l AC, from the vertex to any point on the edge of the base

l² = r² + h², so l = √(r² + h²), h = √(l² − r²) and r = √(l² − h²)

— Slant height of a cone
Using l² = r² + h²
GivenFindWorkingAnswer
r = 5, h = 12l√(25 + 144) = √16913
l = 25, r = 7h√(625 − 49) = √57624
l = 10, h = 8r√(100 − 64) = √366
r = 9, h = 12l√(81 + 144) = √22515

Key takeaways: a right circular cone is formed by turning a right triangle about one of its perpendicular sides. That side is the height h, the other perpendicular side is the radius r and the hypotenuse is the slant height l. Always l² = r² + h².

Read the full lesson

Lesson 2

Curved and total surface area of a cone

From a paper cone to the formula

  1. Cut the cone along a slant height and open it The flat piece looks like a slice of a round cake (a sector); its straight edges have length l.
  2. Cut the piece into many thin strips from the centre Each strip is almost a triangle of height l.
  3. Add the areas of the triangles 1/2 × b₁ × l + 1/2 × b₂ × l + ... = 1/2 × l × (b₁ + b₂ + ...)
  4. The bases add up to the curved edge That edge was the rim of the base: 2πr.
  5. Result Curved surface area = 1/2 × l × 2πr = πrl

Curved surface area of a cone = πrl. Total surface area of a cone = πrl + πr² = πr(l + r).

— Surface area of a cone
Choosing the right surface
ObjectSurface neededFormula
Conical tentCurved only (no floor)πrl
Joker's cap, funnelCurved onlyπrl
Closed solid cone (e.g. a toy)Curved + baseπr(l + r)
Painting the outside of a road coneCurved onlyπrl

Key takeaways: curved surface area = πrl and total surface area = πr(l + r). If the height is given, find l = √(r² + h²) first. Decide from the object whether the base is included. Use π = 22/7 unless the question says otherwise.

Read the full lesson

Lesson 3

Surface area of a sphere and a hemisphere

Surface area of a sphere = 4πr²

— Sphere

Sphere and hemisphere

  • Sphere
    • One curved face
    • Surface area 4πr²
  • Hemisphere: curved surface
    • Half of the sphere's surface
    • Curved surface area 2πr²
    • Used for a bowl or dome
  • Hemisphere: total surface
    • Curved face + flat base
    • 2πr² + πr² = 3πr²
    • Used for a solid half-ball

Key takeaways: sphere 4πr²; hemisphere curved 2πr², total 3πr². Halve a diameter before using it. A dome or a bowl uses the curved surface; a solid half-ball uses the total surface. Surface area grows with the square of the radius.

Read the full lesson

Lesson 4

Volume of a cone

The sand experiment in the textbook

  1. Take a hollow cone and a hollow cylinder Same base radius r and same height h.
  2. Fill the cone with sand and pour it in The cylinder is only partly full.
  3. Do it a second time Still not full.
  4. Do it a third time The cylinder is now full to the brim.
  5. Conclusion 3 × volume of cone = volume of cylinder

Volume of a cone = (1/3)πr²h, where r is the base radius and h the height (not the slant height).

— Volume of a cone
Volumes found in this lesson
ConerhVolume
Example 17 cm12 cm616 cm³
Example 23 cm4 cm≈ 37.71 cm³
Example 314 cm30 cm6160 cm³ = 6.16 L
Example 47 cm24 cm1232 cm³

Key takeaways: V = (1/3)πr²h, one third of the cylinder with the same base and height. Use the vertical height, finding it from the slant height if necessary. 1000 cm³ = 1 litre and 1 m³ = 1 kilolitre.

Read the full lesson

Lesson 5

Volume of a sphere and a hemisphere

Volume of a sphere = (4/3)πr³. Volume of a hemisphere = (2/3)πr³.

— Sphere and hemisphere

Area grows as r², volume as r³

  • Radius × 2
    • Surface area × 4
    • Volume × 8
  • Radius × 3
    • Surface area × 9
    • Volume × 27
  • Radius × 1/2
    • Surface area × 1/4
    • Volume × 1/8
All the formulas of this chapter
SolidSurface areaVolume
ConeCurved πrl; total πr(l + r)(1/3)πr²h
Sphere4πr²(4/3)πr³
HemisphereCurved 2πr²; total 3πr²(2/3)πr³

Key takeaways: sphere (4/3)πr³, hemisphere (2/3)πr³. Mass = volume × density. For hollow solids subtract the inner volume from the outer. Volume grows with the cube of the radius.

Read the full lesson

Privacy · Terms · Refunds · Delivery