Revision notes

Profit and Loss: Foundation

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Cost price, selling price, profit and loss

Profit or loss: both measured on the cost price

  • Profit When SP is more than CP
    • Profit = SP - CP
    • Profit % = Profit ÷ CP × 100
    • Bag: bought ₹ 500, sold ₹ 575, profit ₹ 75 = 15%
  • Loss When CP is more than SP
    • Loss = CP - SP
    • Loss % = Loss ÷ CP × 100
    • Watch: bought ₹ 800, sold ₹ 680, loss ₹ 120 = 15%

Profit % = Profit ÷ CP × 100. Loss % = Loss ÷ CP × 100. Always divide by the cost price.

— Formula
  • Profit = SP - CP; loss = CP - SP.
  • Percentages are on the cost price unless stated.
  • Profit and loss never both occur in a single sale.
Read the full lesson

Lesson 2

Finding SP from CP and CP from SP

The multiplier method, in both directions

  • CP to SP: multiply
    • Profit of p%: SP = CP × (100 + p) ÷ 100
    • Loss of p%: SP = CP × (100 - p) ÷ 100
    • Profit 25%: SP = 1.25 × CP
  • SP to CP: divide
    • CP = SP × 100 ÷ (100 ± p)
    • ₹ 1,260 at 5% profit: CP = 1260 ÷ 1.05 = ₹ 1,200
    • ₹ 720 at 10% loss: CP = 720 ÷ 0.9 = ₹ 800
Common multipliers
ResultSP as fraction of CP
Profit 10%110/100 = 1.1
Profit 25%125/100 = 1.25
Loss 10%90/100 = 0.9
Loss 20%80/100 = 0.8

SP = CP × (100 ± p) ÷ 100. CP = SP × 100 ÷ (100 ± p). Plus for profit, minus for loss.

— Formula
  • Convert the percentage into a multiplier of CP.
  • To find CP, divide SP by the multiplier.
  • Check by applying the percentage to your CP.
Read the full lesson

Lesson 3

Marked price and discount

Three prices in one problem

  1. Cost price ₹ 800 What the trader paid for the table.
  2. Marked price ₹ 1,000 Marked 25% above cost: 800 × 1.25.
  3. Selling price ₹ 900 10% discount on the marked price: 1000 × 0.9.
  4. Profit 12.5% Profit ₹ 100 on the cost of ₹ 800.

Successive discounts of 20% and 10%

  1. Marked price Start from the full marked price.
  2. After 20% off 0.8 of the marked price remains.
  3. After 10% off 0.8 × 0.9 = 0.72 of the marked price remains.
  4. Net discount 28% Not 30%: the remaining fractions multiply.

Discount is on MP. Profit is on CP. Never mix the two bases.

— Remember
  • SP = MP less discount; discount is on MP.
  • Profit is always judged against CP.
  • Successive discounts multiply.
Read the full lesson

Lesson 4

Two-article and 'same selling price' problems

Two patterns that keep coming up

  • Same SP, x% gain and x% loss
    • The overall result is always a loss
    • Net loss = x² ÷ 100 percent
    • ₹ 960 each at 20%: CPs ₹ 800 and ₹ 1,200, loss 4%
  • CP of n articles = SP of m articles
    • Take the CP of one article as ₹ 1
    • Profit % = (n - m) ÷ m × 100
    • CP of 12 = SP of 10: profit 20%

Same SP, one gain x% and one loss x%: net loss = x² ÷ 100 %. If CP of n = SP of m, profit % = (n - m) ÷ m × 100.

— Shortcuts
  • Equal SP with equal gain and loss % always means a net loss.
  • For 'CP of n = SP of m' set CP of one article to 1.
  • Always compare total CP with total SP.
Read the full lesson

Lesson 5

Mixed profit and loss problems

Work with the true totals

  1. Total CP Purchase price plus every extra expense: 3,200 + 300 = ₹ 3,500.
  2. Total SP The money received: ₹ 4,200.
  3. Profit Total SP - total CP: 4,200 - 3,500 = ₹ 700.
  4. Profit % On total CP: 700 ÷ 3,500 × 100 = 20%.

Total CP includes all expenses. Total SP is the money received. Profit % = (Total SP - Total CP) ÷ Total CP × 100.

— Method
  • Include every expense in the cost price.
  • Work with totals when quantities are sold in parts.
  • Check which base (CP or SP) the percentage uses.
Read the full lesson

Lesson 6

Unit rates: dozens, kilograms and pieces

Put both prices in one unit

  1. Choose one unit One pencil, out of a dozen bought for ₹ 60.
  2. Cost per unit 60 ÷ 12 = ₹ 5 a pencil.
  3. SP per unit Each pencil sells for ₹ 6, a profit of ₹ 1.
  4. Profit % on cost 1 ÷ 5 × 100 = 20%.
Conversions you will use
UnitEquals
1 dozen12 pieces
1 kilogram1,000 grams
1 quintal100 kilograms
1 litre1,000 millilitres

Same unit first. Cost covers everything bought; income covers only what is sold. Then profit % = profit ÷ cost × 100.

— Rule to remember
  • Convert both prices to the same unit before comparing.
  • One dozen is 12 pieces; one kilogram is 1,000 grams.
  • Cost is for everything you bought; income is for what you sold.
  • Profit % is always on the cost price.
Read the full lesson

Lesson 7

Finding the marked price and the discount percent

Working with discounts
You wantUseBecause
Discount in rupeesMP - SPThe customer saves the difference
Discount percentDiscount ÷ MP × 100Discount is always on the marked price
Marked price from SPSP ÷ (1 - discount rate)SP is the fraction (100 - d)% of MP

Selling price = marked price × (100 - d) ÷ 100. So marked price = selling price × 100 ÷ (100 - d).

— Rule to remember

Finding the marked price from the selling price

  1. 10% discount The customer pays 90% of the marked price.
  2. 0.9 × MP = 1,350 The shirt sold for ₹ 1,350.
  3. MP = ₹ 1,500 Divide: 1,350 ÷ 0.9.
  4. Check 10% of 1,500 is 150, and 1,500 - 150 = 1,350.
  • Discount = MP - SP, and discount % is on MP.
  • To find MP from SP, divide SP by the remaining fraction, such as 0.9 for a 10% discount.
  • If profit is asked, bring in the cost price and divide by it.
  • Check by applying the discount to your marked price.
Read the full lesson

Lesson 8

Several items together: total cost, total selling price and the overall result

The total method

  1. Each item in rupees Find the cost price and selling price of every item.
  2. Add them up Total CP and total SP.
  3. Profit or loss Total SP - total CP.
  4. Overall % Profit or loss ÷ total CP × 100. Never average the percentages.

Overall result = total SP against total CP, in rupees. Percentages of different amounts cannot be averaged.

— Rule to remember
  • Work in rupees for every item, then total the costs and the selling prices.
  • Do not average profit and loss percentages.
  • Equal costs with equal gain and loss percentages cancel exactly.
  • To reach a target overall result, find the total SP needed and subtract what is already earned.
Read the full lesson

Lesson 9

Break-even and target prices: what should the tag say?

Three planning questions
QuestionMethod
Price for p% profitCP × (100 + p) ÷ 100
Marked price that gives a target SP after d% discountTarget SP ÷ ((100 - d) ÷ 100)
Largest discount without a loss(MP - CP) ÷ MP × 100

Plan from the cost: target SP first, then the marked price by dividing by the discount fraction. Largest safe discount = (MP - CP) ÷ MP × 100.

— Rule to remember

Plan from the cost: target SP first, then the tag

  1. Cost ₹ 900 What the goods cost the shopkeeper.
  2. Target SP ₹ 1,080 For a 20% profit: 900 × 1.2.
  3. Marked price ₹ 1,200 Customer pays 90% after a 10% discount: 1,080 ÷ 0.9.
  • Break-even means SP equals CP.
  • Find the target SP from the cost first; then work back to the marked price.
  • The largest discount with no loss is (MP - CP) ÷ MP × 100.
  • A loss is always a percentage of the cost price.
Read the full lesson

Privacy · Terms · Refunds · Delivery