Revision notes

Time Speed and Distance: Practice

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Units, average speed and late-arrival problems

Distance = Speed × Time. km/h to m/s: multiply by 5/18. Average speed is total distance over total time.

— Rule to remember

Key takeaways: convert units first; use total distance over total time; and for early and late problems equate the difference in times.

Read the full lesson

Lesson 2

Relative speed and trains

Opposite directions: add speeds. Same direction: subtract. Add the lengths when two trains cross each other.

— Rule to remember

Key takeaways: convert to m/s for length in metres; decide add or subtract by direction; and add lengths for trains and platforms.

Read the full lesson

Lesson 3

Boats and streams

Boat speed = average of downstream and upstream speeds. Stream speed = half their difference.

— Rule to remember

Key takeaways: down is u + v and up is u − v; derive u and v from the two speeds; and compute each leg's time separately.

Read the full lesson

Lesson 4

Meeting, catching up and changed speeds

If speed becomes a/b of usual, time becomes b/a of usual. The extra time is (b − a)/a of the usual time.

— Rule to remember

Key takeaways: towards each other, add; chasing, subtract; and use inverse proportion for delay problems.

Read the full lesson

Lesson 5

Mixed speed, time and distance problems

For the same distance, speed and time are in inverse ratio. For equal distances at x and y, average speed = 2xy/(x + y).

— Rule to remember

Key takeaways: total distance over total time every time; inverse ratio between speed and time; and use the harmonic formula for equal distances only.

Read the full lesson

Lesson 6

Ratio problems in speed, time and distance: a practice set

What is fixedRelationExample
DistanceSpeed × time is constant: speeds and times are inverseSpeed ratio 3 : 2 gives time ratio 2 : 3
TimeDistance ∝ speedSpeed ratio 3 : 2 gives distance ratio 3 : 2
SpeedDistance ∝ timeTime ratio 3 : 2 gives distance ratio 3 : 2
NothingDistance ratio = speed ratio × time ratioSpeeds 4 : 5 and times 3 : 2 give 12 : 10 = 6 : 5

Distance = speed × time. In ratios, multiply the speed ratio by the time ratio. For a fixed distance, speed and time swap places.

— Rule to remember
  • Distance ratio = speed ratio × time ratio.
  • Fixed distance: speeds and times in inverse ratio.
  • Percentage changes in speed and time multiply.
  • A single given difference or total fixes the size of a part.
Read the full lesson

Lesson 7

Stoppages and halts: speed with and without stops

Stoppage per hour = (difference of the two speeds ÷ speed excluding stoppages) × 60 minutes.

— Formula to remember
  • Speed including stoppages is always less than speed excluding stoppages.
  • Stoppage per hour = lost distance ÷ running speed, in minutes.
  • Average speed = total distance ÷ (running time + stopping time).
  • A fraction of the hour spent running multiplies the running speed.
Read the full lesson

Lesson 8

Common traps in speed, time and distance

Check before you commit: (1) Does the average lie nearer the slower speed? (2) Did I add the platform or bridge? (3) Did I use the right speed upstream and downstream? (4) Sum or difference of speeds? (5) Whose clock is the answer on?

— Five-point check
  • Equal distances give a harmonic mean, which is less than the arithmetic mean.
  • Add the platform or bridge length to the train's length.
  • Upstream and downstream speeds are not equal, so the time to and fro is not simply double.
  • The direction decides whether speeds add or subtract.
Read the full lesson

Lesson 9

Races and circular tracks: a practice set

Circle: sum of speeds for opposite directions, difference for the same direction, divided into the track length. Races: compare both runners at the moment the winner finishes.

— Rule to remember
  • Track length ÷ relative speed gives the time to the first meeting or lap.
  • Counting meetings uses combined distance ÷ track length.
  • Race margins compare distances at the moment of the finish.
  • A start is the difference between the full distance and the loser's distance.
Read the full lesson

Privacy · Terms · Refunds · Delivery