Revision notes

Chapter 6 Trigonometry: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Trigonometric ratios, complementary angles and the standard values

The six trigonometric ratios of an acute angle θ
RatioDefinitionRelated to
sin θopposite ÷ hypotenusecosec θ = 1/sin θ
cos θadjacent ÷ hypotenusesec θ = 1/cos θ
tan θopposite ÷ adjacent = sin θ/cos θcot θ = 1/tan θ = cos θ/sin θ

sin(90° − θ) = cos θ, cos(90° − θ) = sin θ, tan(90° − θ) = cot θ, cot(90° − θ) = tan θ, sec(90° − θ) = cosec θ, cosec(90° − θ) = sec θ.

— Complementary angles
Trigonometric ratios of standard angles
Ratio0°30°45°60°90°
sin θ01/21/√2√3/21
cos θ1√3/21/√21/20
tan θ01/√31√3undefined
cosec θundefined2√22/√31
sec θ12/√3√22undefined
cot θundefined√311/√30

Where the six ratios come from

  • sin θ = opposite/hypotenuse
    • cosec θ = 1/sin θ
    • cos(90° − θ) = sin θ
  • cos θ = adjacent/hypotenuse
    • sec θ = 1/cos θ
    • sin(90° − θ) = cos θ
  • tan θ = sin θ/cos θ
    • cot θ = 1/tan θ
    • tan(90° − θ) = cot θ
Learn sin and cos well; the other four follow from them.

Key takeaways: sin, cos and tan come from the sides of a right triangle, and cosec, sec and cot are their reciprocals. The ratio of an angle equals the 'co-ratio' of its complement. Learn the table of standard values; it is used in every height-and-distance problem later in this chapter.

Read the full lesson

Lesson 2

The three fundamental trigonometric identities

sin²θ + cos²θ = 1; 1 + tan²θ = sec²θ; 1 + cot²θ = cosec²θ.

— The three fundamental identities
Each identity can be used in several forms
IdentityEqual forms
sin²θ + cos²θ = 1sin²θ = 1 − cos²θ; cos²θ = 1 − sin²θ
1 + tan²θ = sec²θtan²θ = sec²θ − 1; sec²θ − tan²θ = 1
1 + cot²θ = cosec²θcot²θ = cosec²θ − 1; cosec²θ − cot²θ = 1

Which identity links which ratios

  • sin and cos
    • sin²θ + cos²θ = 1
    • Use when sin or cos is given
  • tan and sec
    • sec²θ − tan²θ = 1
    • Use when tan or sec is given
  • cot and cosec
    • cosec²θ − cot²θ = 1
    • Use when cot or cosec is given

Key takeaways: the three identities come from dividing Pythagoras' theorem by each side squared. Pick the identity that links the ratio you know with the one you want. Remember the factorised forms (sec θ + tan θ)(sec θ − tan θ) = 1 and (cosec θ + cot θ)(cosec θ − cot θ) = 1.

Read the full lesson

Lesson 3

Proving trigonometric identities: methods and practice

Steps for proving an identity

  1. Pick the harder side Usually the side with more terms, fractions or square roots.
  2. Change to sin and cos If stuck, write tan, cot, sec and cosec in terms of sin and cos.
  3. Simplify the algebra Take common denominators, factorise, expand (a + b)² or (a + b)(a − b).
  4. Use an identity Replace 1 − cos²θ by sin²θ, sec²θ − 1 by tan²θ, and so on.
  5. Reach the other side Stop when you get exactly the other side; write each step on a new line.
Work on one side only. Never 'cross-multiply' an identity you have not yet proved.

Useful moves: 1 − sin²θ = cos²θ; sec²θ − 1 = tan²θ; cosec²θ − 1 = cot²θ; (1 − sin θ)(1 + sin θ) = cos²θ; (1 − cos θ)(1 + cos θ) = sin²θ.

— Toolkit for proofs

Key takeaways: start from the harder side, move to sin and cos when stuck, simplify with algebra, and use the three identities to finish. With a given condition, square and add (or subtract) to remove θ using an identity.

Read the full lesson

Lesson 4

Heights and distances: line of sight and angle of elevation

Solving a height-and-distance problem

  1. Draw Sketch the object as a vertical line and the ground as horizontal.
  2. Mark Mark the right angle, the given angle and the known length.
  3. Choose the ratio Opposite and adjacent known or wanted: use tan. Hypotenuse involved: use sin or cos.
  4. Solve Write the equation, solve, and use √3 ≈ 1.732 only at the end.
  5. Check Is the answer reasonable? Did you add the observer's eye height if needed?

In most height problems: tan(angle of elevation) = height ÷ horizontal distance.

— The key relation

Key takeaways: draw the triangle first, mark the angle at the observer's eye, and use tan when the height and horizontal distance are involved. Add the observer's eye height when the angle is measured from the eyes. With two angles, write two equations that share the height.

Read the full lesson

Lesson 5

Heights and distances: angle of depression, and elevation with depression

Angle of depression of A seen from B = angle of elevation of B seen from A (alternate angles).

— Depression equals elevation

Elevation and depression

  • Angle of elevation
    • Object above the observer's eye level
    • Observer raises the head
    • Measured up from the horizontal
  • Angle of depression
    • Object below the observer's eye level
    • Observer lowers the head
    • Measured down from the horizontal at the eye
Both are measured from the horizontal, never from the vertical.

Height of a tower seen from a building

  1. Use the depression of the foot Building height ÷ tan(depression) = horizontal distance d.
  2. Use the elevation of the top Upper part of the tower = d × tan(elevation).
  3. Add the parts Tower height = building height + upper part.

Key takeaways: the angle of depression is measured down from the horizontal at the observer's eye, and it equals the angle of elevation from the object back to the observer. For a moving object, find both distances and subtract. With elevation and depression together, find the horizontal distance first, then add the two parts of the height.

Read the full lesson

Privacy · Terms · Refunds · Delivery