Revision notes

Chapter 7 Mensuration: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Surface area of a cylinder, a hollow cylinder and a cone

Cylinder (radius r, height h): C.S.A. = 2πrh; T.S.A. = 2πrh + 2πr² = 2πr(h + r) square units.

— Surface area of a cylinder

Hollow cylinder: C.S.A. = 2πRh + 2πrh = 2π(R + r)h; T.S.A. = 2π(R + r)h + 2π(R² − r²) = 2π(R + r)(R − r + h) square units.

— Surface area of a hollow cylinder

Cone (radius r, height h, slant height l = √(h² + r²)): C.S.A. = πrl; T.S.A. = πrl + πr² = πr(l + r) square units.

— Surface area of a cone

Cylinder and cone surface areas

  • Cylinder
    • Curved surface opens to a rectangle
    • C.S.A. = 2πrh
    • T.S.A. adds two circles: 2πr(h + r)
  • Cone
    • Curved surface opens to a sector
    • C.S.A. = πrl, with l = √(h² + r²)
    • T.S.A. adds one circle: πr(l + r)
Use the slant height l, not the height h, in the cone's curved surface.

Key takeaways: for a cylinder, C.S.A. = 2πrh and T.S.A. = 2πr(h + r); for a hollow cylinder add the inner surface and the end rings. For a cone, first find l = √(h² + r²); then C.S.A. = πrl and T.S.A. = πr(l + r). Decide from the question which faces are actually exposed.

Read the full lesson

Lesson 2

Surface area of a sphere, a hemisphere, a hollow hemisphere and a frustum

Sphere: surface area = 4πr². Hemisphere: C.S.A. = 2πr², T.S.A. = 3πr². Hollow hemisphere (outer R, inner r): C.S.A. = 2π(R² + r²), T.S.A. = π(3R² + r²) square units.

— Spheres and hemispheres

Frustum: l = √(h² + (R − r)²); C.S.A. = π(R + r)l; T.S.A. = π(R + r)l + πR² + πr² square units.

— Surface area of a frustum

Round solids and their surface areas

  • Sphere
    • 4πr²
  • Hemisphere
    • C.S.A. 2πr²
    • T.S.A. 3πr²
  • Hollow hemisphere
    • C.S.A. 2π(R² + r²)
    • T.S.A. π(3R² + r²)
  • Frustum
    • l = √(h² + (R − r)²)
    • C.S.A. π(R + r)l
    • T.S.A. adds πR² + πr²

Key takeaways: sphere 4πr²; hemisphere 2πr² curved and 3πr² total; hollow hemisphere 2π(R² + r²) curved and π(3R² + r²) total. For a frustum, find l = √(h² + (R − r)²), then C.S.A. = π(R + r)l, and add the two circles for the total.

Read the full lesson

Lesson 3

Volume of a cylinder, a hollow cylinder and a cone

Solid cylinder: V = πr²h. Hollow cylinder (material used): V = πR²h − πr²h = π(R² − r²)h cubic units.

— Volume of a cylinder
Units of volume and capacity
FromToMultiply by
cm³litres1/1000 (1 litre = 1000 cm³)
m³litres1000 (1 m³ = 1000 litres)
m³cm³1,000,000

Cone: V = ⅓πr²h cubic units. A cone holds one third of a cylinder with the same base and height.

— Volume of a cone

Cylinder and cone with the same r and h

  • Cylinder
    • V = πr²h
    • Holds 3 cones' worth
    • Ratio of volumes 3
  • Cone
    • V = ⅓πr²h
    • One third of the cylinder
    • Ratio of volumes 1
Ratio of volumes, cylinder to cone: 3 : 1.

Key takeaways: cylinder V = πr²h; material of a hollow cylinder V = π(R² − r²)h; cone V = ⅓πr²h. Convert carefully: 1000 cm³ = 1 litre and 1 m³ = 1000 litres. In ratio questions, square the radius ratio and multiply by the height ratio.

Read the full lesson

Lesson 4

Volume of a sphere, a hemisphere, hollow shells and a frustum

Sphere: V = (4/3)πr³. Hollow sphere (material): V = (4/3)π(R³ − r³). Hemisphere: V = (2/3)πr³. Hollow hemisphere (material): V = (2/3)π(R³ − r³) cubic units.

— Volumes of round solids

Frustum of a cone: V = ⅓πh(R² + Rr + r²) cubic units.

— Volume of a frustum

Volume of a bucket-shaped frustum

  1. List R, r and h R and r are the radii of the two ends; h is the vertical height (not the slant height).
  2. Work out R² + Rr + r² Square each radius and add the product of the radii.
  3. Multiply by ⅓πh Use π = 22/7 and cancel early.
  4. Convert if needed Divide cm³ by 1000 for litres.

Key takeaways: sphere (4/3)πr³, hemisphere (2/3)πr³, and for hollow shells use R³ − r³. A frustum holds ⅓πh(R² + Rr + r²). Volume grows with the cube of the radius: double the radius and the volume becomes 8 times as large.

Read the full lesson

Lesson 5

Combined solids and converting one solid into another

Combined solids: what to add

  • Surface area
    • Add only exposed surfaces
    • Leave out faces that are glued together
    • Example: cone on hemisphere = πrl + 2πr²
  • Volume
    • Add the volumes of all parts
    • Subtract any part that is cut out
    • Example: cone on hemisphere = ⅓πr²h + (2/3)πr³

Recasting: volume of the original solid = total volume of the new solid(s). Number of small solids = volume of the big solid ÷ volume of one small solid.

— No change in volume

Key takeaways: for combined solids, surface area counts only what is visible, while volumes simply add (or subtract). When a solid is melted or reshaped, its volume is unchanged: set the old volume equal to the new and solve. To count small pieces, divide the big volume by one small volume.

Read the full lesson

Privacy · Terms · Refunds · Delivery