Revision notes

Unit 5 Acoustics: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Sound waves: longitudinal waves, frequency ranges and v = nλ

Sound waves grouped by frequency
KindFrequencyExamples
Audible20 Hz to 20 000 HzVocal cords, stretched strings
InfrasonicBelow 20 HzEarthquakes, ocean waves, sounds of whales
UltrasonicAbove 20 kHzSounds made by bats; heard by dogs, bats and dolphins, not by humans
Sound waves and light waves
SoundLight
Needs a mediumNeeds no medium; travels through vacuum
Longitudinal wavesTransverse waves
Audible wavelengths in air from about 1.7 cm (20 kHz) to about 17 m (20 Hz)Visible wavelengths from about 4 × 10⁻⁷ m to 7 × 10⁻⁷ m
About 340 m s⁻¹ in air3 × 10⁸ m s⁻¹ in air

From vibration to hearing

  1. A body vibrates
  2. Nearby particles are pushed and pulled
  3. Compressions and rarefactions travel out Longitudinal wave
  4. The wave reaches the ear

Sound: produced by vibrations, needs a medium, travels as a longitudinal wave. v = nλ = λ/T. Audible range 20 Hz to 20 kHz.

Key takeaways: sound is energy carried by compressions and rarefactions in a medium. Below 20 Hz is infrasonic, above 20 kHz ultrasonic. Speed, frequency and wavelength are tied together by v = nλ.

Read the full lesson

Lesson 2

Speed of sound in different media and what affects it

Speed of sound in different media (values as given in the Tamil Nadu textbook)
Nature of mediumMediumSpeed (m s⁻¹)
SolidCopper5010
SolidIron5950
SolidAluminium6420
LiquidKerosene1324
LiquidWater1493
LiquidSea water1533
GasAir at 0 °C331
GasAir at 20 °C343

What changes the speed of sound in a gas

  • Density
    • v ∝ 1/√d
    • Denser gas: slower sound
  • Temperature
    • v ∝ √T (T in kelvin)
    • Air: v_t = v₀ + 0.61t, t in °C
    • Hotter: faster
  • Relative humidity
    • More humid air: faster sound
    • Sounds carry well in the rainy season

v_solid > v_liquid > v_gas. In a gas: v ∝ 1/√d and v ∝ √T. Air: v_t = 331 + 0.61t m s⁻¹ (t in °C).

Key takeaways: elasticity speeds sound up and density slows it down. In air, warmer and more humid means faster sound. Always use kelvin with v ∝ √T; the 0.61 rule uses degrees Celsius.

Read the full lesson

Lesson 3

Reflection of sound and its uses

What a compression becomes after reflection

  • At a rigid wall (denser boundary)
    • Compression pushes the wall with force F
    • Wall pushes back with R = −F
    • Air near the wall is compressed again
    • Compression returns as a compression
  • At a rarer boundary (solid to air)
    • Compression pushes the free surface
    • The rarer medium gives way easily
    • The surface moves back, spreading the particles
    • Compression returns as a rarefaction
Devices that use reflection of sound
DeviceHow it works
Sound boardA concave board in a hall with the speaker at its focus; it reflects the speech towards the audience and improves what they hear
Ear trumpetA hearing aid wide at one end and narrow at the other; sound entering the wide end is reflected by the walls into the narrow end and reaches the ear with more intensity
MegaphoneA horn wide at one end and narrow at the other; the voice spoken into the narrow end is kept together by multiple reflections, so it is heard loudly far away

∠i = ∠r. At a rigid (denser) boundary a compression returns as a compression; at a rarer boundary it returns as a rarefaction. Concave surfaces focus sound; convex surfaces spread it.

Key takeaways: sound obeys the same laws of reflection as light. The kind of boundary decides whether a compression returns as a compression or a rarefaction. Curved surfaces can focus or spread sound, which is used in halls, galleries and simple devices.

Read the full lesson

Lesson 4

Echoes: conditions, uses and measuring the speed of sound

Echo: v = 2d/t, d = vt/2. Minimum time 0.1 s; minimum distance d = v/20 (17.2 m when v = 344 m s⁻¹).

The echo method

  1. Measure distance d to the reflecting surface
  2. Place the receiver beside the source
  3. Send a pulse and time the echo, t
  4. Repeat 3 or 4 times and average t
  5. Speed = 2d/t

Key takeaways: an echo needs a delay of at least 0.1 s, which in air means a surface at least about 17 m away. Every echo calculation uses the total path 2d, so speed = 2d/t and distance = vt/2.

Read the full lesson

Lesson 5

The Doppler effect and its applications

Apparent frequency in each case
CaseApparent frequency n′Heard pitch
Both move towards each othern′ = (v + v_L)/(v − v_S) × nHigher
Both move away from each othern′ = (v − v_L)/(v + v_S) × nLower
Same direction, source behind (source follows listener)n′ = (v − v_L)/(v − v_S) × nDepends on the speeds
Same direction, listener behind (listener follows source)n′ = (v + v_L)/(v + v_S) × nDepends on the speeds
Source at rest, listener moves towards itn′ = (v + v_L)/v × nHigher
Source at rest, listener moves awayn′ = (v − v_L)/v × nLower
Listener at rest, source moves towards itn′ = v/(v − v_S) × nHigher
Listener at rest, source moves awayn′ = v/(v + v_S) × nLower

Uses of the Doppler effect

  • Speed checks on roads
    • A wave from a police unit reflects off a moving vehicle
    • The frequency shift gives the vehicle's speed
  • Tracking satellites
    • Radio frequency from a satellite falls as it moves away
    • The change helps locate it
  • RADAR (Radio Detection And Ranging)
    • Reflected radio waves give the speed and location of aircraft
  • SONAR
    • Frequency change of reflected sound gives the speed of submarines and marine animals

General form: n′ = [(v ± v_L)/(v ∓ v_S)] × n, upper signs for motion towards each other. Approaching: higher pitch; receding: lower pitch. Wind: use v ± W.

Key takeaways: relative motion that shortens the distance raises the heard frequency; motion that lengthens it lowers the frequency. The listener's speed goes in the top of the fraction, the source's in the bottom.

Read the full lesson

Privacy · Terms · Refunds · Delivery