Revision notes

Chapter 10 Differential Calculus - Differentiability and Methods of Differentiation: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

The derivative as a limit: slope of a tangent and instantaneous velocity

m_sec = [f(x₀ + Δx) − f(x₀)] / Δx = Δy / Δx

— Slope of the secant (a difference quotient)
Secant slopes of f(x) = x² + 3x at x₀ = 2
Δx2 + Δxf(2 + Δx)ΔyΔy/Δx
0.12.14.41 + 6.3 = 10.710.717.1
0.012.014.0401 + 6.03 = 10.07010.07017.01
−0.11.93.61 + 5.7 = 9.31−0.696.9
−0.011.993.9601 + 5.97 = 9.9301−0.06996.99

The four-step method for the slope at x₀

  1. Step 1: Evaluate Write f(x₀) and f(x₀ + Δx), expanding the second fully.
  2. Step 2: Subtract Δy = f(x₀ + Δx) − f(x₀); the constant terms cancel.
  3. Step 3: Divide Divide Δy by Δx (Δx ≠ 0) and cancel the common factor Δx.
  4. Step 4: Take the limit Let Δx → 0 in what remains. The result is m_tan.

Key takeaways: the tangent slope is the limit of secant slopes Δy/Δx as Δx → 0; the instantaneous velocity is the limit of average velocities Δs/Δt; both are the derivative f′(x₀). Work in four steps, cancel Δx before taking the limit, and remember that dy/dx is a single symbol for a limit.

Read the full lesson

Lesson 2

One-sided derivatives, differentiability and continuity

f′(x₀) exists if and only if f′(x₀⁻) and f′(x₀⁺) both exist and are equal. If either fails, f is not differentiable at x₀.

— Test for differentiability at a point

f is NOT differentiable at x₀ when

  • A vertical tangent The difference quotient grows without bound.
    • y = x^(1/3) at 0
    • y = x^(1/5) at 0
  • A sharp corner or peak (∨ or ∧) Left and right derivatives differ.
    • y = |x − 2| at 2
    • y = |x + 3| at −3
  • A discontinuity A jump, hole or break at x₀.
    • ⌊x⌋ at every integer
    • a piecewise function whose pieces do not meet

Continuity and differentiability

  • Differentiable at x₀
    • Always continuous at x₀
    • Graph smooth, one non-vertical tangent
    • Example: x² at any point
  • Continuous, not differentiable
    • No break, but a corner or vertical tangent
    • Example: |x| at 0
    • Example: x^(1/3) at 0
  • Not continuous
    • Never differentiable
    • Example: ⌊x⌋ at integers
    • Example: a jump in a piecewise function

Key takeaways: compare f′(x₀⁻) and f′(x₀⁺); corners, vertical tangents and discontinuities all destroy differentiability; differentiable ⇒ continuous, but continuous does not imply differentiable. For a piecewise function, check continuity first, then match the one-sided derivatives.

Read the full lesson

Lesson 3

Rules of differentiation and derivatives of elementary functions

RuleStatementIdea of the proof
Sum(u + v)′ = u′ + v′; extends to any finite sum, and to differencesSplit Δ(u + v)/Δx into Δu/Δx + Δv/Δx and take limits
Constant multiple(k f)′ = k f′The constant k comes out of the limit
Product(uv)′ = u v′ + v u′Add and subtract u(x)v(x + Δx); use continuity of v
Quotient(u/v)′ = (v u′ − u v′) / v², where v ≠ 0Combine u(x + Δx)/v(x + Δx) − u(x)/v(x) over one denominator
ChainIf y = f(u) and u = g(x), then dy/dx = (dy/du)(du/dx) = f′(g(x)) g′(x)Write Δy/Δx = (Δy/Δu)(Δu/Δx); Δu → 0 as Δx → 0

Product: (uv)′ = uv′ + vu′. Quotient: (u/v)′ = (vu′ − uv′)/v². Chain: d/dx f(g(x)) = f′(g(x)) · g′(x).

— The three rules to know by heart
Standard derivatives (x restricted to where each function is defined)
f(x)f′(x)f(x)f′(x)
k (constant)0xⁿn xⁿ⁻¹
log x1/xlogₐx1/(x log a)
eˣeˣaˣaˣ log a
sin xcos xcos x−sin x
tan xsec² xcot x−cosec² x
sec xsec x tan xcosec x−cosec x cot x
sin⁻¹x1/√(1 − x²)cos⁻¹x−1/√(1 − x²)
tan⁻¹x1/(1 + x²)cot⁻¹x−1/(1 + x²)
sec⁻¹x1/(x√(x² − 1)) for x > 1cosec⁻¹x−1/(x√(x² − 1)) for x > 1

Choosing the rule

  1. Look at the outermost operation Is the whole expression a sum, a product, a quotient, or a function of something?
  2. Apply that rule Sum → term by term; product → uv′ + vu′; quotient → (vu′ − uv′)/v²; function of a function → chain rule.
  3. Differentiate each piece Use the table of standard derivatives, repeating the choice for any piece that is itself built up.
  4. Simplify Collect terms and use identities such as sin²x + cos²x = 1.

Key takeaways: learn the five rules and the table of standard derivatives; they replace first principles in almost every problem. In the quotient rule the order matters: the denominator times the derivative of the numerator comes first. Logarithms and exponentials to base a bring in the constant log a.

Read the full lesson

Lesson 4

Chain rule in practice, implicit and logarithmic differentiation

Steps in logarithmic differentiation

  1. Take log of both sides log y = log f(x); expand with the laws of logarithms.
  2. Differentiate implicitly The left side gives (1/y) y′.
  3. Solve for y′ Multiply through by y.
  4. Substitute back Replace y by the original expression f(x).
The four cases of a power (a, b constants; f, g functions of x)
FormDerivativeMethod
aᵇ0constant
[f(x)]ᵇb [f(x)]ᵇ⁻¹ f′(x)power rule with chain rule
a^g(x)a^g(x) log a · g′(x)exponential rule with chain rule
[f(x)]^g(x)[f(x)]^g(x) [g′(x) log f(x) + g(x) f′(x)/f(x)]logarithmic differentiation

Key takeaways: in the chain rule, one factor per layer, from the outside in; in implicit differentiation every term in y picks up a factor y′; logarithmic differentiation is the only route for [f(x)]^g(x) and a shortcut for messy products and quotients.

Read the full lesson

Lesson 5

Substitution, parametric differentiation and higher order derivatives

dy/dx = (dy/dt) / (dx/dt), provided dx/dt ≠ 0.

— Parametric differentiation

From position to jerk

  1. Position s(t) Where the body is.
  2. Velocity v = s′(t) How fast the position changes.
  3. Acceleration a = s″(t) How fast the velocity changes.
  4. Jerk j = s‴(t) How fast the acceleration changes.

Key takeaways: a good substitution turns an inverse trigonometric function into a multiple of θ; check the range of θ. For parametric curves dy/dx = (dy/dt)/(dx/dt), and for the second derivative divide by dx/dt once more. The derivative of f with respect to g is f′/g′. Velocity, acceleration and jerk are the first, second and third derivatives of position.

Read the full lesson

Privacy · Terms · Refunds · Delivery