Revision notes

Unit 9 Ratio Analysis: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Accounting ratios, ratio analysis and how ratios are classified

Three forms in which an accounting ratio is expressed
FormHow it is writtenTypical use
Pure ratio (proportion)A quotient such as 2 or 2:1Current ratio, quick ratio, debt equity ratio
PercentageThe quotient multiplied by 100, such as 25%Gross profit ratio, net profit ratio, return on investment
TimesHow many times one figure is of another, such as 4 timesInventory, trade receivables, trade payables and fixed assets turnover ratios

Traditional classification of ratios (examples from the book)

  • Balance sheet ratios Both items from the balance sheet
    • Current ratio
    • Quick ratio
    • Proprietary ratio
    • Debt equity ratio
  • Income statement ratios Both items from the statement of profit and loss
    • Gross profit ratio
    • Operating cost ratio
    • Operating profit ratio
    • Net profit ratio
  • Inter-statement ratios One item from each statement
    • Return on investment
    • Trade receivables turnover ratio
    • Trade payables turnover ratio
    • Fixed assets turnover ratio

Functional classification of ratios

  • Liquidity ratios Can the firm pay its short term obligations?
    • Current ratio
    • Quick ratio
  • Long term solvency ratios Can the firm repay its debts in the long run?
    • Debt equity ratio
    • Proprietary ratio
    • Capital gearing ratio
  • Turnover ratios How efficiently are assets used to generate revenue?
    • Inventory turnover ratio
    • Trade receivables turnover ratio
    • Trade payables turnover ratio
    • Fixed assets turnover ratio
  • Profitability ratios How much does the business earn?
    • Gross profit ratio
    • Operating cost ratio
    • Operating profit ratio
    • Net profit ratio
    • Return on investment
This is the plan for lessons 2 to 5.
Working: look at where each item comes from, then ask what the ratio is used to judge
RatioItems comparedTraditional classFunctional class
Quick ratioQuick assets and current liabilities (both balance sheet)Balance sheet ratioLiquidity ratio
Net profit ratioNet profit after tax and revenue from operations (both income statement)Income statement ratioProfitability ratio
Fixed assets turnover ratioRevenue from operations (income statement) and average fixed assets (balance sheet)Inter-statement ratioTurnover ratio
Debt equity ratioLong term debt and shareholders' funds (both balance sheet)Balance sheet ratioLong term solvency ratio

Ratio = one related item ÷ another. Traditional classification asks 'from which statement?'; functional classification asks 'for what purpose?'.

— Key idea

Key takeaways: a ratio expresses the relationship between two related items and may be a pure ratio, a percentage or a number of times. Ratio analysis simplifies figures and helps analysis, efficiency checks, budgeting and comparison. The traditional classification has balance sheet, income statement and inter-statement ratios; the functional classification has liquidity, long term solvency, turnover and profitability ratios.

Read the full lesson

Lesson 2

Liquidity ratios: current ratio and quick ratio

Items the Tamil Nadu textbook lists
Current assets includeCurrent liabilities include
Current investmentsShort-term borrowings
Inventories (stock)Trade payables (sundry creditors and bills payable)
Trade receivables (sundry debtors and bills receivable, less provision for doubtful debts)Other current liabilities (expenses payable, income received in advance and so on)
Cash and cash equivalents (cash in hand, cash at bank)Short-term provisions
Short-term loans and advances given-
Other current assets (prepaid expenses, accrued income and so on)-

Current ratio = Current assets ÷ Current liabilities. Quick ratio = Quick assets ÷ Current liabilities, where Quick assets = Current assets − Inventories − Prepaid expenses.

— Formulas

Current ratio versus quick ratio

  • Current ratio
    • Numerator: all current assets
    • Includes inventories and prepaid expenses
    • Usual norm 2:1
    • Broad test of short term solvency
  • Quick ratio
    • Numerator: quick assets only
    • Excludes inventories and prepaid expenses
    • Usual norm 1:1
    • Stricter (acid) test of immediate solvency

Key takeaways: liquidity ratios test short term solvency. Current ratio = current assets ÷ current liabilities (norm 2:1). Quick ratio = quick assets ÷ current liabilities, with inventories and prepaid expenses left out (norm 1:1). Ignore fixed assets and long term liabilities, and remember that norms vary by industry.

Read the full lesson

Lesson 3

Long term solvency ratios: debt equity, proprietary and capital gearing

Terms used in the three ratios
TermWhat it includes
Long term debtDebentures, bonds, long term loans and other long term borrowings
Shareholders' fundsEquity share capital + Preference share capital + Reserves and surplus (a debit balance in the statement of profit and loss is shown as a negative figure under reserves and surplus)
Shareholders' funds (alternative)Total assets − Non-current liabilities − Current liabilities
Equity shareholders' fundsEquity share capital + Reserves and surplus (preference share capital left out)
Funds bearing fixed interest or fixed dividendPreference share capital, debentures, bonds and long term borrowings carrying fixed interest

Debt equity ratio = Long term debt ÷ Shareholders' funds. Proprietary ratio = Shareholders' funds ÷ Total assets. Capital gearing ratio = Funds bearing fixed interest or fixed dividend ÷ Equity shareholders' funds.

— Formulas

What each long term solvency ratio compares

  • Debt equity ratio Outsiders' long term money against owners' money
    • Lower is safer for lenders
    • 1:1 generally satisfactory
  • Proprietary ratio Owners' money against everything the firm owns
    • Higher is safer for creditors
  • Capital gearing ratio Fixed-charge funds against equity holders' funds
    • More than 1 = high geared
    • Less than 1 = low geared
Balance sheet of Thamirabarani Ltd as on 31 March (made-up figures)
Particulars₹
I. EQUITY AND LIABILITIES
1. Shareholders' funds: (a) Equity share capital3,00,000
(a) 10% Preference share capital1,00,000
(b) Reserves and surplus: General reserve 60,000 + Surplus 40,0001,00,000
2. Non-current liabilities: Long-term borrowings (9% Debentures)2,50,000
3. Current liabilities: (a) Trade payables2,20,000
(b) Short-term provisions30,000
Total10,00,000
II. ASSETS
1. Non-current assets: (a) Fixed assets7,00,000
(b) Non-current investments50,000
2. Current assets: (a) Inventories1,00,000
(b) Trade receivables1,10,000
(c) Cash and cash equivalents40,000
Total10,00,000

Key takeaways: long term solvency ratios look at how the business is financed. Debt equity = long term debt ÷ shareholders' funds (lower is safer). Proprietary = shareholders' funds ÷ total assets (higher is safer). Capital gearing = fixed-charge funds ÷ equity shareholders' funds (above one is high geared). A debit balance in profit and loss reduces shareholders' funds.

Read the full lesson

Lesson 4

Turnover ratios and the related periods

The four turnover ratios at a glance
RatioNumeratorDenominatorRelated period
Inventory turnoverCost of revenue from operationsAverage inventoryInventory conversion period
Trade receivables turnoverCredit revenue from operationsAverage trade receivablesDebt collection period
Trade payables turnoverNet credit purchasesAverage trade payablesCredit payment period
Fixed assets turnoverRevenue from operationsAverage fixed assets-

Period = Number of days (365) or months (12) in a year ÷ Turnover ratio. Average = (Opening + Closing) ÷ 2; if the opening figure is missing, use the closing figure.

— Shortcut

How the turnover ratios follow the trading cycle

  1. Buy goods on credit Trade payables arise: trade payables turnover
  2. Hold and sell the stock Inventory turnover and conversion period
  3. Collect from customers Trade receivables turnover and collection period
  4. Pay suppliers and buy again Credit payment period

Then back to step 1: Buy goods on credit

Moyar Ltd: credit revenue from operations ₹8,00,000; credit purchases ₹5,00,000; purchases returns ₹20,000
Particulars (made-up)Opening ₹Closing ₹
Sundry debtors70,00080,000
Bills receivable20,00030,000
Sundry creditors35,00027,000
Bills payable10,0008,000

Key takeaways: turnover ratios are expressed in times and measure speed. Use cost of revenue for inventory, credit sales for receivables, net credit purchases for payables and revenue from operations for fixed assets, each against the average balance. Divide 365 days or 12 months by a turnover ratio to get the related period.

Read the full lesson

Lesson 5

Profitability ratios, return on investment, and the advantages and limits of ratios

Profitability ratios in the Tamil Nadu textbook
RatioFormula (× 100)Higher or lower is better?
Gross profit ratioGross profit ÷ Revenue from operationsHigher; it must be enough to cover indirect expenses
Operating cost ratioOperating cost ÷ Revenue from operationsLower; leaves more margin for non-operating expenses
Operating profit ratioOperating profit ÷ Revenue from operationsHigher; shows operational efficiency
Net profit ratioNet profit after tax ÷ Revenue from operationsHigher; shows overall profitability
Return on investmentNet profit before interest and tax ÷ Capital employedHigher; overall measure of how well capital is used

Operating cost ratio + Operating profit ratio = 100%. Return on investment uses profit BEFORE interest and tax, because capital employed includes the long term debt on which that interest is paid.

— Remember

From revenue to the profits the ratios use

  1. Revenue from operations Net sales
  2. − Cost of revenue from operations Gives gross profit
  3. − Operating expenses Gives operating profit
  4. ± Non-operating items Add other income, deduct finance costs and losses: profit before tax
  5. − Tax Gives net profit after tax
Statement of profit and loss of Amaravathi Ltd (made-up figures)
Particulars₹
I. Revenue from operations10,00,000
II. Other income (interest on investments)30,000
III. Total revenue10,30,000
IV. Expenses: Purchases of stock-in-trade6,20,000
Changes in inventories-20,000
Employee benefits expenses (direct wages 40,000; salaries 60,000)1,00,000
Finance costs (interest on 10% debentures)25,000
Depreciation35,000
Other expenses (administration 40,000; selling 45,000; loss on sale of machinery 10,000)95,000
Total expenses8,55,000
V. Profit before tax (III − IV)1,75,000
Tax (made-up amount)45,000
VI. Profit after tax1,30,000

Ratio analysis: what it offers and where it falls short

  • Advantages
    • Measures efficiency
    • Measures solvency
    • Guides investment decisions
    • Analyses profitability
    • Allows intra and inter firm comparison
  • Limitations
    • Only a means, not an end
    • Depends on accurate statements
    • Needs consistent accounting methods
    • Few accepted norms
    • Ignores price level changes

Key takeaways: gross profit, operating cost, operating profit and net profit ratios are all measured against revenue from operations; return on investment is measured against capital employed using profit before interest and tax. Keep non-operating items out of operating cost and operating profit. Ratios are powerful for comparison, but only as good as the figures and norms behind them.

Read the full lesson

Privacy · Terms · Refunds · Delivery