Revision notes

Chapter 10 Ordinary Differential Equations: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Differential equations: order, degree and classification

Order = the highest derivative present. Degree = the power of that highest derivative after the equation is made free of radicals and written as a polynomial in all its derivatives; if that is impossible, the degree is not defined.

— Order and degree

Classifying differential equations

  • Partial (PDE) Partial derivatives; two or more independent variables.
    • ∂u/∂t = ∂²u/∂x²
  • Ordinary (ODE) Ordinary derivatives; one independent variable.
    • Linear: y, y′, y″ … only to power 1, no products, not inside sin, e, log
    • Nonlinear: everything else, e.g. y y′ = x, y′ = cos y
  • Linear ODE aₙ(x)y⁽ⁿ⁾ + … + a₀(x)y = g(x)
    • Homogeneous if g(x) = 0
    • Non-homogeneous if g(x) ≠ 0
In this chapter the word homogeneous has a second meaning as well (lesson 4); here it is about g(x) = 0.
Only y and its derivatives decide linearity, never the functions of x.
EquationOrderLinear?Reason
y″ + x²y′ − 3y = eˣ2Linear, non-homogeneousy, y′, y″ to power 1; g(x) = eˣ ≠ 0
y″ = x²y2Linear, homogeneousRewrite y″ − x²y = 0; the x² is only a coefficient
y y′ + x = 01NonlinearProduct of y and y′
y′ = cos y1Nonlineary sits inside cos
(y′)² + y = x1Nonlineary′ is squared

Key takeaways: a differential equation contains a derivative of an unknown function. The order is the highest derivative; the degree is its power once the equation is a polynomial in the derivatives, and it is not defined when a derivative is trapped inside sin, e, log and so on. ODEs have one independent variable. A linear ODE has y and its derivatives only to the first power, unmultiplied and outside other functions; it is homogeneous when the right side g(x) is zero.

Read the full lesson

Lesson 2

Forming differential equations from physical laws and families of curves

Eliminating n arbitrary constants

  1. Write the family The given equation with n constants.
  2. Differentiate n times This gives n new equations.
  3. Eliminate Use the n + 1 equations to remove all n constants.
  4. Result A differential equation of order n with no constants.

Eliminating one arbitrary constant gives a first-order differential equation, two constants a second-order equation, and in general n constants an equation of order n.

— Formation rule
The number of constants fixes the order
FamilyConstantsDifferential equationOrder
y = mx1x y′ − y = 01
y = A e^(3x)1y′ − 3y = 01
x² = 4ay1x y′ − 2y = 01
y = A cos 2x + B sin 2x2y″ + 4y = 02
y = A e^(2x) + B e^(−3x)2y″ + y′ − 6y = 02

Key takeaways: a law about rates becomes a differential equation once "rate" is written as a derivative and "proportional" as a constant k. For a family with n constants, differentiate n times and eliminate the constants; the result has order n. Always check the answer by substituting one member of the family.

Read the full lesson

Lesson 3

Solutions of differential equations, variables separable and substitution

Variables separable

  1. Rearrange x-terms with dx, y-terms with dy.
  2. Integrate Integrate both sides.
  3. Add one constant C, or log C if logs appear.
  4. Use the condition Find C for a particular solution.

For dy/dx = f(ax + by + c) put z = ax + by + c; then dz/dx = a + b f(z), and dz/[a + b f(z)] = dx.

— Substitution method

Key takeaways: a general solution has as many constants as the order; a particular solution has none. Separate the variables, integrate both sides and add one constant. When x and y occur only through ax + by + c, substitute z = ax + by + c and separate in z. Always check a solution by differentiating it.

Read the full lesson

Lesson 4

Homogeneous differential equations and first-order linear equations

For dy/dx + Py = Q: I.F. = e^(∫P dx) and the solution is y × (I.F.) = ∫ Q × (I.F.) dx + C. For dx/dy + Px = Q (P, Q functions of y): x × e^(∫P dy) = ∫ Q e^(∫P dy) dy + C.

— Linear equations

Solving a linear equation

  1. Standard form Make the coefficient of dy/dx equal to 1; read off P and Q.
  2. Integrating factor I.F. = e^(∫P dx); simplify e^(log u) = u.
  3. Multiply and integrate y × I.F. = ∫ Q × I.F. dx + C.
  4. Tidy and check Solve for y and substitute back.

Key takeaways: a homogeneous equation dy/dx = g(y/x) separates after y = vx, because dy/dx = v + x dv/dx. A linear equation dy/dx + Py = Q is solved by multiplying by I.F. = e^(∫P dx), giving y × I.F. = ∫Q × I.F. dx + C; first make the coefficient of dy/dx equal to 1. If the equation is linear in x instead, swap the roles of x and y.

Read the full lesson

Lesson 5

Applications: growth, decay, Newton's law of cooling and mixture problems

The three models side by side

  • Growth or decay dx/dt = kx
    • Solution x = x₀e^(kt)
    • k > 0 growth, k < 0 decay
    • Doubling time or half-life (log 2)/|k|
  • Cooling or warming dT/dt = k(T − Tₘ)
    • Solution T = Tₘ + Ce^(kt)
    • k < 0
    • T approaches Tₘ
  • Mixture dx/dt = IN − OUT
    • OUT = flow × x/volume
    • Linear or separable
    • x approaches a steady value
Quick reference
ModelEquationSolution
Population growthdx/dt = kx, k > 0x = x₀e^(kt)
Radioactive decaydA/dt = −kA, k > 0A = A₀e^(−kt), half-life (log 2)/k
Continuous compounding at rate rdA/dt = rAA = A₀e^(rt)
Newton's law of coolingdT/dt = k(T − Tₘ), k < 0T = Tₘ + Ce^(kt)
Single-tank mixturedx/dt = IN − OUTSolve as a separable or linear equation

Key takeaways: write the rate as a derivative, solve by separation, and use the two given conditions to find the constant of integration and the rate constant. Growth and decay both follow dx/dt = kx; half-life is (log 2)/k. In cooling, it is the difference T − Tₘ that decays exponentially. In mixtures, the rate of change is inflow minus outflow, and the outflow uses the current concentration.

Read the full lesson

Privacy · Terms · Refunds · Delivery