Revision notes

Chapter 3 Algebra: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Polynomials: degree, types, arithmetic and zeros

Polynomial or not?
ExpressionPolynomial?Reason
3y³ + 2y² − 7YesAll powers are whole numbers
√2 x² + x/3YesCoefficients may be irrational or fractions
x² + 4/xNo4/x = 4x⁻¹ has a negative power
5√t + 1No√t = t^(1/2) has a fractional power

Two ways to classify polynomials

  • By number of terms
    • Monomial: one term, e.g. 7x²
    • Binomial: two terms, e.g. 3x − 5
    • Trinomial: three terms, e.g. x² + 2x + 1
  • By degree
    • Constant: degree 0, e.g. 9
    • Linear: degree 1, e.g. 4x + 3
    • Quadratic: degree 2, e.g. x² − 5
    • Cubic: degree 3, e.g. 2x³ + x
The zero polynomial 0 has no degree defined; a non-zero constant has degree 0.

a is a zero of p(x) exactly when p(a) = 0. The zero of ax + b is −b/a.

— Zeros of a polynomial

Key takeaways: a polynomial has whole-number powers only; its degree is its highest power (highest total power for several variables); polynomials are classified by terms and by degree; a zero a of p(x) satisfies p(a) = 0 and is a root of p(x) = 0.

Read the full lesson

Lesson 2

The remainder theorem and the factor theorem

Remainder when p(x) is divided by x − a is p(a); by ax + b it is p(−b/a).

— Remainder theorem

Testing whether x − a is a factor of p(x)

  1. Find the zero of the divisor x − a = 0 gives x = a
  2. Substitute Work out p(a)
  3. Decide p(a) = 0: factor. p(a) ≠ 0: not a factor, and p(a) is the remainder

(x − a) is a factor of p(x) exactly when p(a) = 0.

— Factor theorem

Key takeaways: the remainder on dividing p(x) by x − a is p(a), and by ax + b it is p(−b/a); x − a is a factor exactly when p(a) = 0; unknown coefficients are found by setting p(a) equal to the given remainder (0 for a factor).

Read the full lesson

Lesson 3

Algebraic identities: squares, products and cubes

Identities of this lesson
IdentityExpanded form
(a + b + c)²a² + b² + c² + 2ab + 2bc + 2ca
(x + a)(x + b)(x + c)x³ + (a + b + c)x² + (ab + bc + ca)x + abc
(x + y)³x³ + 3x²y + 3xy² + y³ = x³ + y³ + 3xy(x + y)
(x − y)³x³ − 3x²y + 3xy² − y³ = x³ − y³ − 3xy(x − y)
(x + y + z)(x² + y² + z² − xy − yz − zx)x³ + y³ + z³ − 3xyz

If x + y + z = 0, then x³ + y³ + z³ = 3xyz.

— A special case worth remembering

Choosing an identity

  • Square of a sum
    • Two terms: (a ± b)²
    • Three terms: (a + b + c)²
  • Product of binomials
    • (a + b)(a − b)
    • (x + a)(x + b)
    • (x + a)(x + b)(x + c)
  • Cubes
    • (x ± y)³
    • x³ + y³ + z³ − 3xyz

Key takeaways: an identity holds for all values; (a + b + c)² has three squares and three doubled products; the three-binomial identity uses the sum, the sum of products in pairs and the product; (x ± y)³ = x³ ± 3x²y + 3xy² ± y³; and when x + y + z = 0, x³ + y³ + z³ = 3xyz.

Read the full lesson

Lesson 4

Factorisation and division of polynomials

Using identities to factorise
PatternFactorised formExample
a² − b²(a + b)(a − b)9x² − 16y² = (3x + 4y)(3x − 4y)
a² + 2ab + b²(a + b)²4a² + 12ab + 9b² = (2a + 3b)²
a² + b² + c² + 2ab + 2bc + 2ca(a + b + c)²x² + 4y² + 9z² + 4xy + 12yz + 6zx = (x + 2y + 3z)²
a³ + b³(a + b)(a² − ab + b²)8x³ + 27 = (2x + 3)(4x² − 6x + 9)
a³ − b³(a − b)(a² + ab + b²)27a³ − 64b³ = (3a − 4b)(9a² + 12ab + 16b²)

The repeating step of synthetic division

  1. Bring down or keep the last result Start with the leading coefficient
  2. Multiply by a Write the product under the next coefficient
  3. Add This gives the next number in the bottom row

Then back to step 1: Bring down or keep the last result

Synthetic division layout
a = 23−45−2
multiply6418
add32916 (remainder)

Key takeaways: factorise by common factors, grouping, identities, or splitting bx using two numbers with product ac and sum b; dividend = divisor × quotient + remainder; synthetic division is a quick way to divide by x − a; with the factor theorem it splits a cubic into linear factors.

Read the full lesson

Lesson 5

GCD of polynomials and linear equations in two variables

Table of values for 2x + y = 6: plot (0, 6), (1, 4), (2, 2), (3, 0) and join them
x0123
y = 6 − 2x6420

Methods of solving a pair of linear equations

  • Geometric
    • Graphical method: draw both lines
    • Read off the point of intersection
  • Algebraic
    • Substitution: make one variable the subject and substitute
    • Elimination: add or subtract to remove a variable
    • Cross multiplication: use a formula in the coefficients
Consistency of a₁x + b₁y + c₁ = 0 and a₂x + b₂y + c₂ = 0
ConditionLinesSolutionsSystem
a₁/a₂ ≠ b₁/b₂Intersect at one pointExactly oneConsistent
a₁/a₂ = b₁/b₂ = c₁/c₂Coincide (same line)Infinitely manyConsistent
a₁/a₂ = b₁/b₂ ≠ c₁/c₂ParallelNoneInconsistent

Unique solution when a₁/a₂ ≠ b₁/b₂; infinitely many when a₁/a₂ = b₁/b₂ = c₁/c₂; none when a₁/a₂ = b₁/b₂ ≠ c₁/c₂.

— Consistency test

Key takeaways: the GCD of polynomials is the product of common factors with their lowest powers; ax + by + c = 0 is a straight line; a pair of linear equations can be solved graphically or by substitution, elimination or cross multiplication; the ratios of coefficients tell whether there is one solution, infinitely many or none. Always check your solution in both equations.

Read the full lesson

Privacy · Terms · Refunds · Delivery