Chemistry practice for Sub-Inspectors of Police (Taluk and Armed Reserve) Recruitment
50 practice questions on what the checked Sub-Inspectors of Police (Taluk and Armed Reserve) Recruitment syllabus lists under Chemistry. Each has its answer and explanation. If an answer looks wrong, please tell us.
3 kg of a fuel on complete combustion releases 1,35,000 kJ. Its calorific value is:
- 45,000 kJ/kg
- 4,05,000 kJ/kg
- 15,000 kJ/kg
- 40,500 kJ/kg
Answer and explanation
Answer: A
Calorific value = 1,35,000 ÷ 3 = 45,000 kJ/kg. Multiplying instead of dividing gives the wrong answer 4,05,000 kJ/kg.
Which balanced equation shows the incomplete combustion of methane forming carbon monoxide?
- 2CH4 + 3O2 → 2CO + 4H2O
- CH4 + 2O2 → CO2 + 2H2O
- CH4 + O2 → CO + H2O
- 2CH4 + O2 → 2CO + 2H2O
Answer and explanation
Answer: A
Check atoms: left 2 C, 8 H, 6 O; right 2 C, 8 H, 2 + 4 = 6 O. Balanced. CH4 + 2O2 → CO2 + 2H2O is complete combustion; CH4 + O2 → CO + H2O and 2CH4 + O2 → 2CO + 2H2O do not balance.
Nylon-2–nylon-6 is formed from
- glycine and aminocaproic acid
- 3-hydroxybutanoic acid and 3-hydroxypentanoic acid
- adipic acid and hexamethylenediamine
- caprolactam alone
Answer and explanation
Answer: A
Nylon-2–nylon-6 is a biodegradable polyamide of glycine and aminocaproic acid. 3-hydroxybutanoic and 3-hydroxypentanoic acids give PHBV, adipic acid and hexamethylenediamine give nylon-6,6, and caprolactam alone gives nylon-6.
Which set contains only amphoteric oxides?
- Al2O3, ZnO, BeO
- Na2O, MgO, BaO
- SO3, P4O10, Cl2O7
- CO, NO, N2O
Answer and explanation
Answer: A
Al2O3, ZnO and BeO react with both acids and bases. Na2O, MgO and BaO are basic, SO3, P4O10 and Cl2O7 acidic, and CO, NO and N2O neutral.
Which reaction temporarily ends a chlorine chain in the stratosphere?
- Cl + O₃ → ClO + O₂
- Cl + CH₄ → HCl + CH₃
- ClO + O → Cl + O₂
- CF₂Cl₂ → CF₂Cl + Cl
Answer and explanation
Answer: B
Forming HCl locks chlorine into a reservoir. Cl + O₃ → ClO + O₂ and ClO + O → Cl + O₂ are chain steps; CF₂Cl₂ → CF₂Cl + Cl starts a chain.
Mixing solutions of which pair gives a precipitate?
- NaCl and KNO3
- NaNO3 and KCl
- HCl and NaOH
- AgNO3 and KCl
Answer and explanation
Answer: D
AgNO3 + KCl → AgCl + KNO3; silver chloride is insoluble. With NaCl and KNO3, or NaNO3 and KCl, all possible products are soluble, and HCl with NaOH only forms water and soluble NaCl.
What is the anode reaction of the lead storage battery on discharge?
- PbO2 + 4H+ + SO4 2- + 2e- gives PbSO4 + 2H2O
- 2H2O gives O2 + 4H+ + 4e-
- Pb2+ + 2e- gives Pb
- Pb + SO4 2- gives PbSO4 + 2e-
Answer and explanation
Answer: D
Lead is oxidised at the anode to PbSO4. PbO2 + 4H+ + SO4 2- + 2e- gives PbSO4 + 2H2O is the cathode reaction.
Which of these is a disproportionation reaction?
- 2H2O2 → 2H2O + O2
- NaOH + HCl → NaCl + H2O
- CaCO3 → CaO + CO2
- Zn + 2HCl → ZnCl2 + H2
Answer and explanation
Answer: A
In H2O2 oxygen is −1; it becomes −2 in H2O and 0 in O2, so the same element is both reduced and oxidised. NaOH + HCl and the decomposition of CaCO3 involve no change in oxidation number; Zn + 2HCl is redox between two different elements.
A water has total hardness 120 ppm and alkalinity 200 ppm (all HCO3−). Its non-carbonate hardness is:
- 0 ppm
- 80 ppm
- 120 ppm
- 200 ppm
Answer and explanation
Answer: A
Alkalinity exceeds hardness, so all of the hardness is carbonate hardness and the non-carbonate hardness is zero.
Water has permanent Ca 30 ppm and permanent Mg 20 ppm. The pure soda needed per litre is:
- 53 mg
- 74 mg
- 37 mg
- 106 mg
Answer and explanation
Answer: A
Soda = 1.06 × (30 + 20) = 53 mg per litre.
For the water analysed above (temporary Ca 50, temporary Mg 50, permanent Ca 50, permanent Mg 50 ppm), the pure lime needed per litre is:
- 148 mg
- 74 mg
- 111 mg
- 200 mg
Answer and explanation
Answer: A
Lime = 0.74 × (50 + 2 × 50 + 50) = 0.74 × 200 = 148 mg per litre.
P = 40 ppm and M = 200 ppm. The hydrogencarbonate alkalinity is:
- 160 ppm
- 120 ppm
- 80 ppm
- 40 ppm
Answer and explanation
Answer: B
P < M/2, so HCO3− = M − 2P = 200 − 80 = 120 ppm (and CO3 2− = 80 ppm).
An effluent has COD 160 mg/L and BOD 120 mg/L. The BOD/COD ratio is:
- 0.75
- 1.33
- 0.25
- 0.50
Answer and explanation
Answer: A
120 ÷ 160 = 0.75, which means that most of the organic matter is biodegradable. The ratio cannot exceed 1.
The volume of 0.01 M EDTA needed by 50 mL of the same water (200 ppm) is:
- 5 mL
- 20 mL
- 2 mL
- 10 mL
Answer and explanation
Answer: D
Hardness in 50 mL = 10 mg CaCO3 = 0.10 mmol; EDTA volume = 0.10 ÷ 0.01 = 10 mL.
5000 L of the water (200 ppm total hardness) is softened by sodium zeolite. The salt needed to regenerate the bed is:
- 1.00 kg
- 1.17 kg
- 2.34 kg
- 0.585 kg
Answer and explanation
Answer: B
Hardness removed = 200 × 5000 = 1,000,000 mg = 1.0 kg as CaCO3; NaCl = 1.0 × 117 ÷ 100 = 1.17 kg.
For the same water, the pure soda needed per litre is:
- 53 mg
- 159 mg
- 106 mg
- 212 mg
Answer and explanation
Answer: C
Soda = 1.06 × (50 + 50) = 106 mg per litre.
At illustrative prices of ₹8 per kg of lime and ₹40 per kg of soda, 2.0 kg of lime and 1.0 kg of soda cost:
- ₹48
- ₹56
- ₹66
- ₹80
Answer and explanation
Answer: B
Lime 2.0 × 8 = ₹16; soda 1.0 × 40 = ₹40; total ₹56.
P = 90 ppm and M = 120 ppm. The hydroxide alkalinity is:
- 30 ppm
- 90 ppm
- 60 ppm
- 120 ppm
Answer and explanation
Answer: C
P > M/2, so OH− = 2P − M = 180 − 120 = 60 ppm.
74 g of pure lime removes temporary calcium hardness equal to 100 g of CaCO3. In 500 L of water this corresponds to a hardness of:
- 50 ppm
- 100 ppm
- 400 ppm
- 200 ppm
Answer and explanation
Answer: D
100 g = 100,000 mg; 100,000 mg ÷ 500 L = 200 mg/L = 200 ppm.
10,000 L of 60 ppm water is made by blending fully softened water with raw water of 300 ppm. The volume of softened water needed is:
- 2000 L
- 5000 L
- 8000 L
- 6000 L
Answer and explanation
Answer: C
Raw fraction = 60 ÷ 300 = 0.2, so raw = 2000 L and softened = 8000 L.
A calculation gives 2.072 kg of pure lime. The lime available is 80% pure. The mass to be used is:
- 1.66 kg
- 2.59 kg
- 2.07 kg
- 3.20 kg
Answer and explanation
Answer: B
Mass = 2.072 ÷ 0.80 = 2.59 kg.
Water has temporary Ca 40 ppm and temporary Mg 20 ppm and no other hardness. The pure lime needed per litre is:
- 29.6 mg
- 44.4 mg
- 59.2 mg
- 74.0 mg
Answer and explanation
Answer: C
Lime = 0.74 × (40 + 2 × 20) = 0.74 × 80 = 59.2 mg per litre.
A sample gives P = 0 and M = 160 ppm. The alkalinity is due to:
- Hydroxide only
- Carbonate only
- Hydrogencarbonate only
- Hydroxide and carbonate
Answer and explanation
Answer: C
With P = 0 there is no hydroxide or carbonate, so the whole alkalinity is hydrogencarbonate.
A 100 mL sample needs 5.0 mL of 0.02 N HCl to the phenolphthalein end point. P in ppm of CaCO3 is:
- 25 ppm
- 50 ppm
- 100 ppm
- 10 ppm
Answer and explanation
Answer: B
P = 5.0 × 0.02 × 50 × 1000 ÷ 100 = 50 ppm.
Equal volumes of water with 81 mg/L Ca(HCO3)2 and water with 111 mg/L CaCl2 are mixed. The permanent hardness of the mixture is:
- 100 ppm
- 25 ppm
- 75 ppm
- 50 ppm
Answer and explanation
Answer: D
CaCl2 gives 100 ppm as CaCO3; after mixing equal volumes it is halved to 50 ppm.
A softener treats 3000 L/h of 200 ppm water for 10 hours. The hardness removed (as CaCO3) is:
- 600 g
- 60 kg
- 6.0 kg
- 600 kg
Answer and explanation
Answer: C
Volume = 30,000 L; hardness = 200 mg/L × 30,000 L = 6,000,000 mg = 6.0 kg.
Water of 200 ppm is mixed with water of 50 ppm to give 125 ppm. The volumes needed are in the ratio (hard : soft):
- 1 : 1
- 1 : 2
- 2 : 1
- 1 : 3
Answer and explanation
Answer: A
200x + 50(1 − x) = 125 gives x = 0.5, so the volumes are equal.
Per mg of anhydrous Al2(SO4)3 (342 g/mol), the alkalinity consumed as CaCO3 is about (3 mol CaCO3 = 300 g per mole of alum):
- 0.45 mg
- 1.14 mg
- 0.50 mg
- 0.88 mg
Answer and explanation
Answer: D
300 ÷ 342 = 0.877 mg. The hydrated form gives 0.45 mg per mg, so check which form the question names.
What volume of 0.01 M NaOH neutralises 100 mL of 0.02 M HCl?
- 50 mL
- 100 mL
- 400 mL
- 200 mL
Answer and explanation
Answer: D
Moles of HCl = 0.02 × 0.100 = 0.002 mol. Volume of NaOH = 0.002 ÷ 0.01 = 0.2 L = 200 mL.
A drop of phenolphthalein is added to lime water (a base). The colour becomes:
- Colourless
- Pink
- Red
- Yellow
Answer and explanation
Answer: B
Phenolphthalein is colourless in acid and pink in base.
0.01% by mass of a substance in water is equivalent to:
- 100 ppm
- 1 ppm
- 10 ppm
- 1000 ppm
Answer and explanation
Answer: A
1% = 10,000 ppm, so 0.01% = 100 ppm.
250 mL of a sample needs 7.5 mL of 0.025 N thiosulphate in a Winkler titration. The DO is:
- 3.0 mg/L
- 12.0 mg/L
- 7.5 mg/L
- 6.0 mg/L
Answer and explanation
Answer: D
DO = 7.5 × 0.025 × 8 × 1000 ÷ 250 = 1500 ÷ 250 = 6.0 mg/L.
Distilled water is almost pure because:
- Germs are all killed by filtration
- Chlorine is added during boiling
- Dissolved salts stay behind as water evaporates
- Alum is mixed in and removes the salts
Answer and explanation
Answer: C
When water boils, the dissolved salts do not form vapour, so the condensed steam is almost free of them.
A dose of 3.0 mg/L leaves a free residual of 0.8 mg/L. The chlorine demand of the water is:
- 3.8 mg/L
- 2.2 mg/L
- 0.8 mg/L
- 3.0 mg/L
Answer and explanation
Answer: B
Demand = dose − residual = 3.0 − 0.8 = 2.2 mg/L.
A tank measures 2 m by 1.5 m by 1 m. When full, it holds:
- 300 L
- 30 L
- 3000 L
- 30,000 L
Answer and explanation
Answer: C
Volume = 3 m³ = 3 × 1000 = 3000 L.
In the water cycle, the change of water vapour into droplets that form clouds is called:
- Evaporation
- Condensation
- Precipitation
- Transpiration
Answer and explanation
Answer: B
Vapour cooling into liquid droplets is condensation.
Rain water is slightly acidic because it:
- Collects chlorine from the pipes it runs through
- Dissolves carbon dioxide from air, forming carbonic acid
- Carries sea salt up from the ocean surface
- Is full of dissolved calcium from the clouds
Answer and explanation
Answer: B
Dissolved CO2 forms a very weak acid, carbonic acid, so even clean rain has a pH a little below 7.
Compared with a solution of pH 5, a solution of pH 3 has a hydrogen-ion concentration that is:
- 2 times greater
- 20 times greater
- 100 times greater
- 1000 times greater
Answer and explanation
Answer: C
A difference of 2 pH units is a factor of 10^2 = 100.
A waste has ultimate BOD L0 = 200 mg/L and k = 0.23 per day. Its BOD5 is about (e^(−1.15) = 0.3166):
- 200 mg/L
- 137 mg/L
- 63 mg/L
- 100 mg/L
Answer and explanation
Answer: B
BOD5 = 200 × (1 − 0.3166) = 136.7 mg/L.
A sample has cations 8.0 meq/L. Its anions are HCO3− 4.0, Cl− 3.0 and SO4 2− 1.0 meq/L. The ion balance:
- Is exact, since the anions also total 8.0 meq/L
- Fails by 1 meq/L because of the sulphate
- Fails because sulphate is divalent
- Cannot be checked using meq/L values
Answer and explanation
Answer: A
4.0 + 3.0 + 1.0 = 8.0 meq/L, equal to the cations, so the balance is exact.
The theoretical oxygen demand of 100 mg/L of ethanol (C2H5OH, 46 g/mol) is about:
- 48 mg/L
- 96 mg/L
- 417 mg/L
- 209 mg/L
Answer and explanation
Answer: D
C2H5OH + 3O2 → 2CO2 + 3H2O; 96 g of O2 per 46 g of ethanol = 2.087, so 100 mg/L needs 208.7 mg/L.
A 5000 L tank has dissolved oxygen of 6 mg/L. The mass of dissolved oxygen is:
- 3 g
- 30 g
- 300 g
- 30 mg
Answer and explanation
Answer: B
6 mg/L × 5000 L = 30,000 mg = 30 g.
In sewage treatment, microbes break down organic matter and lower the BOD in which stage?
- Primary treatment
- Secondary treatment
- Screening
- Skimming of oil
Answer and explanation
Answer: B
Secondary (biological) treatment uses air and microbes to oxidise organic matter, lowering the BOD.
Heat to evaporate 10 kg of water already at 100 °C (L = 22.6 × 10⁵ J/kg) is:
- 2.26 × 10⁶ J
- 2.26 × 10⁷ J
- 2.26 × 10⁵ J
- 4.2 × 10⁴ J
Answer and explanation
Answer: B
Q = 10 × 22.6 × 10⁵ = 2.26 × 10⁷ J.
400 L of water of 300 ppm is mixed with 600 L of water of 100 ppm. The hardness of the mixture is:
- 200 ppm
- 180 ppm
- 220 ppm
- 150 ppm
Answer and explanation
Answer: B
Mass = 400 × 300 + 600 × 100 = 180,000 mg in 1000 L, so 180 ppm.
A sample has total hardness 300 ppm and alkalinity 200 ppm (all HCO3−). Its non-carbonate hardness is:
- 500 ppm
- 100 ppm
- 200 ppm
- 300 ppm
Answer and explanation
Answer: B
Alkalinity is less than total hardness, so carbonate hardness = 200 ppm and non-carbonate hardness = 300 − 200 = 100 ppm.
Raw water has alkalinity 10 mg/L (as CaCO3) and the alum dose consumes 13.5 mg/L. The lime, Ca(OH)2, needed to supply the deficiency is about:
- 3.5 mg/L
- 5.0 mg/L
- 1.3 mg/L
- 2.6 mg/L
Answer and explanation
Answer: D
Deficiency = 3.5 mg/L as CaCO3; lime = 3.5 × 74 ÷ 100 = 2.6 mg/L.
A dose of 30 mg/L of Al2(SO4)3·18H2O (666 g/mol) consumes alkalinity (as CaCO3) of:
- 13.5 mg/L
- 27 mg/L
- 30 mg/L
- 6.7 mg/L
Answer and explanation
Answer: A
30 × 300 ÷ 666 = 13.5 mg/L.
A dose of 30 mg/L of Al2(SO4)3·18H2O releases carbon dioxide of about:
- 11.9 mg/L
- 30 mg/L
- 3.5 mg/L
- 26.4 mg/L
Answer and explanation
Answer: A
6 mol CO2 (264 g) per 666 g of alum: 30 × 264 ÷ 666 = 11.9 mg/L.
After alum treatment of a water containing Ca(HCO3)2, the calcium appears as:
- Solid CaCO3 trapped inside the floc
- Dissolved Ca(OH)2 raising the pH
- Dissolved CaSO4 (non-carbonate hardness)
- Gaseous calcium escaping with the CO2
Answer and explanation
Answer: C
The equation gives 3CaSO4 per mole of alum. Calcium stays dissolved, so total hardness is unchanged and the carbonate hardness becomes non-carbonate.