Chapter 4 Carbon and its Compounds

Practice questions

Why do detergents remain effective in hard water while soaps do not?

  1. Detergents do not contain any hydrocarbon chain
  2. Detergents react with calcium ions to form more lather
  3. The charged ends of detergents do not form insoluble precipitates with calcium and magnesium ions
  4. Detergents remove all the water's hardness by boiling it
Answer and explanation

Answer: C

Soap forms insoluble scum with Ca²⁺ and Mg²⁺ ions. Detergents also have long hydrocarbon chains, but their charged ends do not form such precipitates, so they keep cleaning in hard water.

CH₃COOC₂H₅ + NaOH → C₂H₅OH + CH₃COONa. This reaction is called:

  1. Esterification
  2. Dehydration
  3. Hydrogenation
  4. Saponification
Answer and explanation

Answer: D

An ester treated with an alkali gives back the alcohol and the sodium salt of the acid. This is saponification, the reaction used to make soap.

Which test tells ethanoic acid apart from ethanol?

  1. Both burn, so burning shows the difference
  2. Adding sodium hydrogencarbonate: only the acid fizzes and gives CO₂
  3. Adding water: only ethanol dissolves
  4. Smelling them is the only safe way
Answer and explanation

Answer: B

CH₃COOH + NaHCO₃ → CH₃COONa + H₂O + CO₂: the acid fizzes and the gas turns lime water milky. Ethanol does not react. Both dissolve in water and both burn.

Which reaction is a substitution reaction?

  1. CH₄ + Cl₂ → CH₃Cl + HCl (in sunlight)
  2. C₂H₄ + H₂ → C₂H₆ (nickel catalyst)
  3. CH₄ + 2O₂ → CO₂ + 2H₂O
  4. CH₃CH₂OH → CH₃COOH (acidified K₂Cr₂O₇)
Answer and explanation

Answer: A

In CH₄ + Cl₂ → CH₃Cl + HCl one H is replaced by Cl: substitution. The others are addition, combustion and oxidation.

Unsaturated hydrocarbons usually burn with:

  1. A clean blue flame
  2. No flame at all
  3. A yellow flame with lots of black smoke
  4. A green flame
Answer and explanation

Answer: C

Unsaturated compounds tend to burn incompletely, giving a yellow, sooty flame. Saturated hydrocarbons in enough air give a clean blue flame.

Alkaline potassium permanganate is added drop by drop to warm ethanol. Its colour disappears at first but stays once excess is added. Why does the colour disappear at first?

  1. Ethanol dilutes the colour away
  2. The permanganate is used up in oxidising the ethanol
  3. The permanganate reacts with the water bath
  4. Ethanol is a stronger oxidising agent than permanganate
Answer and explanation

Answer: B

Permanganate is an oxidising agent. While ethanol is left to oxidise (to ethanoic acid), each drop is used up and loses its colour. Once all the ethanol has reacted, extra permanganate has nothing to react with, so its colour remains.

The correct name of CH₃–CH₂–CH₂–CHO is:

  1. Propanal
  2. Butanone
  3. Butanol
  4. Butanal
Answer and explanation

Answer: D

Count the carbons, including the one in –CHO: 4, so the stem is but-. The –CHO group is an aldehyde, suffix -al: butanal.

C₂H₅OH and C₃H₇OH are successive members of a homologous series. What is the difference in their molecular masses? (C = 12 u, H = 1 u)

  1. 14 u
  2. 12 u
  3. 16 u
  4. 28 u
Answer and explanation

Answer: A

The difference is one –CH₂– unit: 12 + 2 × 1 = 14 u. Check: C₂H₅OH = 46 u and C₃H₇OH = 60 u; 60 − 46 = 14 u.

Which suffix shows an aldehyde in a name?

  1. -ol
  2. -one
  3. -al
  4. -oic acid
Answer and explanation

Answer: C

Aldehydes end in -al (propanal), alcohols in -ol, ketones in -one and carboxylic acids in -oic acid.

Which two features of carbon together explain the huge number of carbon compounds?

  1. Metallic nature and high density
  2. Catenation and tetravalency
  3. Ionic bonding and low melting point
  4. Radioactivity and catenation
Answer and explanation

Answer: B

Catenation (carbon bonding with carbon into chains, branches and rings) and tetravalency (four bonds to many different atoms) give millions of compounds.

Cyclohexane, C₆H₁₂, is a:

  1. Saturated ring compound
  2. Unsaturated ring compound with three double bonds
  3. Straight-chain alkene
  4. Branched alkyne
Answer and explanation

Answer: A

Cyclohexane has six carbons in a ring joined only by single bonds, so it is saturated. Benzene, C₆H₆, is the ring with alternate double bonds.

Which formula represents an alkyne?

  1. C₃H₈
  2. C₃H₆
  3. C₄H₁₀
  4. C₃H₄
Answer and explanation

Answer: D

Alkynes follow CₙH₂ₙ₋₂. For n = 3, H = 2 × 3 − 2 = 4, so C₃H₄ (propyne). C₃H₈ and C₄H₁₀ are alkanes; C₃H₆ is an alkene.

Assertion (A): Diamond and graphite have very different physical properties. Reason (R): In diamond each carbon atom is bonded to four others, while in graphite each is bonded to three others in layers.

  1. Both A and R are true, and R is the correct explanation of A
  2. Both A and R are true, but R is not the correct explanation of A
  3. A is true but R is false
  4. A is false but R is true
Answer and explanation

Answer: A

Both are pure carbon; the difference in properties comes from how the atoms are bonded. Diamond's rigid 3D network makes it very hard; graphite's layers make it slippery and conducting. R explains A.

Which molecule contains a double bond?

  1. H₂
  2. N₂
  3. O₂
  4. CH₄
Answer and explanation

Answer: C

Each oxygen atom (2, 6) shares two electrons with the other, giving O=O. H₂ and CH₄ have single bonds; N₂ has a triple bond.

Carbon forms covalent compounds because:

  1. It has 2 valence electrons
  2. It cannot easily gain or lose four electrons, so it shares them
  3. It is a metal
  4. It forms ions easily
Answer and explanation

Answer: B

Carbon (2, 4) would need to gain or lose four electrons; both need too much energy. So it shares electrons, forming covalent bonds.

Assertion (A): Soap does not lather well in hard water. Reason (R): Soap reacts with calcium and magnesium ions in hard water to form an insoluble scum.

  1. Both A and R are true, and R is the correct explanation of A
  2. Both A and R are true, but R is not the correct explanation of A
  3. A is true but R is false
  4. A is false but R is true
Answer and explanation

Answer: A

Calcium and magnesium ions react with soap to form scum (R true). The soap used up this way cannot form lather, which is why soap lathers poorly in hard water (A true). R explains A.

In a soap micelle, where are the hydrocarbon tails of the soap molecules?

  1. On the outside, facing the water
  2. In the interior, around the oily dirt
  3. Dissolved separately in the water
  4. Attached to the container
Answer and explanation

Answer: B

The hydrophobic tails point inwards into the oil droplet, and the hydrophilic ionic ends face the water on the outside.

The reaction of ethanoic acid with ethanol in the presence of an acid catalyst is called:

  1. Saponification
  2. Hydrogenation
  3. Substitution
  4. Esterification
Answer and explanation

Answer: D

An acid and an alcohol form an ester and water: CH₃COOH + CH₃CH₂OH → CH₃COOCH₂CH₃ + H₂O. This is esterification.

Heating ethanol at 443 K with excess concentrated sulphuric acid gives:

  1. Ethene
  2. Ethanoic acid
  3. Ethyl ethanoate
  4. Methane
Answer and explanation

Answer: A

Concentrated sulphuric acid acts as a dehydrating agent and removes water from ethanol: CH₃CH₂OH → CH₂=CH₂ + H₂O. The product is ethene.

When ethanol reacts with sodium, the gas evolved is:

  1. Oxygen
  2. Carbon dioxide
  3. Hydrogen
  4. Ethene
Answer and explanation

Answer: C

2Na + 2CH₃CH₂OH → 2CH₃CH₂O⁻Na⁺ + H₂. Hydrogen is evolved and sodium ethoxide forms.

Privacy · Terms · Refunds · Delivery