CBSE Class 11 Chemistry

Practice questions

What is formed when benzene reacts with chlorine in ultraviolet light, without a Lewis acid catalyst?

  1. Chlorobenzene
  2. Hexachlorobenzene, C₆Cl₆
  3. 1,4-Dichlorobenzene
  4. Benzene hexachloride, C₆H₆Cl₆
Answer and explanation

Answer: D

In UV light chlorine adds across the ring (three molecules of Cl₂), giving benzene hexachloride (gammaxane). Substitution products such as chlorobenzene need a Lewis acid such as anhydrous AlCl₃ or FeCl₃.

Arrange in order of decreasing reactivity towards an electrophile: benzene, nitrobenzene, toluene.

  1. Nitrobenzene > benzene > toluene
  2. Toluene > benzene > nitrobenzene
  3. Benzene > toluene > nitrobenzene
  4. Toluene > nitrobenzene > benzene
Answer and explanation

Answer: B

–CH₃ releases electrons and activates the ring, so toluene reacts fastest. –NO₂ withdraws electrons and deactivates the ring, so nitrobenzene reacts slowest. Benzene lies between.

How many π electrons does naphthalene (C₁₀H₈, two fused benzene rings) have, and does it fit Hückel's rule?

  1. 10, yes (n = 2)
  2. 8, no
  3. 12, no
  4. 10, no
Answer and explanation

Answer: A

Naphthalene has five C=C bonds in its Kekulé structure, so 10 π electrons. 4n + 2 = 10 gives n = 2, so it fits Hückel's rule and is aromatic (it is planar and fully delocalised).

What mass of calcium carbide (CaC₂, 64 g mol⁻¹) is needed to produce 13 g of ethyne (26 g mol⁻¹), assuming complete reaction?

  1. 16 g
  2. 64 g
  3. 26 g
  4. 32 g
Answer and explanation

Answer: D

CaC₂ + 2H₂O → Ca(OH)₂ + C₂H₂ (1 : 1). Moles of C₂H₂ = 13 ÷ 26 = 0.50 mol, so CaC₂ = 0.50 mol × 64 g mol⁻¹ = 32 g.

Ethyne is passed into water containing HgSO₄ and dilute H₂SO₄ at 333 K. The product is:

  1. Ethanol
  2. Ethanoic acid
  3. Ethanal
  4. Ethane-1,2-diol
Answer and explanation

Answer: C

One molecule of water adds to give the enol CH₂=CHOH, which changes at once into ethanal, CH₃CHO.

Which of these reacts with sodamide (NaNH₂) to release ammonia?

  1. But-1-yne
  2. But-2-yne
  3. But-1-ene
  4. Butane
Answer and explanation

Answer: A

Only a hydrogen on a triply bonded (sp) carbon is acidic enough. But-1-yne, CH₃CH₂C≡CH, has one; but-2-yne has none, and alkenes and alkanes are far less acidic.

Assertion (A): cis-But-2-ene has a higher dipole moment than trans-but-2-ene.
Reason (R): In trans-but-2-ene the two C–CH₃ bond dipoles point in opposite directions and cancel.

  1. Both A and R are true, and R is the correct explanation of A
  2. Both A and R are true, but R is not the correct explanation of A
  3. A is true, but R is false
  4. A is false, but R is true
Answer and explanation

Answer: A

cis-But-2-ene has a dipole moment of 0.33 D; in the trans isomer the bond dipoles cancel and the dipole moment is almost zero. R explains A.

What is the major product when 2-methylpropene reacts with HBr in the presence of benzoyl peroxide?

  1. 2-Bromo-2-methylpropane
  2. 1,2-Dibromo-2-methylpropane
  3. 1-Bromo-2-methylpropane
  4. 2-Methylpropan-2-ol
Answer and explanation

Answer: C

With peroxide, Br• adds first to the CH₂ end, giving the more stable tertiary radical (CH₃)₂C•–CH₂Br, which takes H from HBr: (CH₃)₂CHCH₂Br, 1-bromo-2-methylpropane (anti-Markovnikov).

An alkene C₅H₁₀ gives propanone and ethanal on ozonolysis. What is it?

  1. Pent-2-ene
  2. 2-Methylbut-2-ene
  3. 3-Methylbut-1-ene
  4. 2-Methylbut-1-ene
Answer and explanation

Answer: B

Join the carbonyl carbons of (CH₃)₂C=O and CH₃CH=O with a double bond: (CH₃)₂C=CHCH₃, 2-methylbut-2-ene. Pent-2-ene would give ethanal and propanal; the but-1-enes would give methanal.

Which statement about the conformations of ethane is correct?

  1. The eclipsed form is more stable than the staggered form
  2. The two conformers can be separated at room temperature
  3. Bond angles change between the staggered and eclipsed forms
  4. The energy difference between them is small, about 12.5 kJ mol⁻¹
Answer and explanation

Answer: D

Staggered is more stable; the barrier of about 12.5 kJ mol⁻¹ is easily crossed at room temperature, so the forms cannot be separated. Bond lengths and angles are the same in all conformations.

Arrange the following in order of increasing boiling point: hexane, 2,2-dimethylbutane, 2-methylpentane.

  1. Hexane < 2-methylpentane < 2,2-dimethylbutane
  2. 2-Methylpentane < hexane < 2,2-dimethylbutane
  3. 2,2-Dimethylbutane < hexane < 2-methylpentane
  4. 2,2-Dimethylbutane < 2-methylpentane < hexane
Answer and explanation

Answer: D

All are C₆H₁₄. More branching gives a more compact shape, less surface contact and weaker van der Waals forces. So the most branched boils lowest and straight-chain hexane highest.

What volume of oxygen is needed to burn 5.0 L of butane completely (all volumes at the same temperature and pressure)?

  1. 32.5 L
  2. 20.0 L
  3. 65.0 L
  4. 25.0 L
Answer and explanation

Answer: A

2C₄H₁₀ + 13O₂ → 8CO₂ + 10H₂O, so 1 volume of butane needs 6.5 volumes of O₂. 5.0 × 6.5 = 32.5 L.

Assertion (A): Sodium butanoate on heating with soda lime gives propane.
Reason (R): Decarboxylation removes one carbon atom as CO₂ (ending up as Na₂CO₃).

  1. Both A and R are true, and R is the correct explanation of A
  2. Both A and R are true, but R is not the correct explanation of A
  3. A is true, but R is false
  4. A is false, but R is true
Answer and explanation

Answer: A

CH₃CH₂CH₂COONa + NaOH → CH₃CH₂CH₃ + Na₂CO₃. The four-carbon salt gives a three-carbon alkane because one carbon leaves as carbonate. R explains A.

A mixture of bromomethane and bromoethane is heated with sodium in dry ether. Which alkanes are formed?

  1. Propane only
  2. Ethane, propane and butane
  3. Ethane and butane only
  4. Methane and ethane
Answer and explanation

Answer: B

Any two alkyl groups can join: CH₃ + CH₃ → ethane, CH₃ + C₂H₅ → propane, C₂H₅ + C₂H₅ → butane. This mixture is why the Wurtz reaction is not used for odd-carbon alkanes.

How many chain isomers are possible for C₆H₁₄?

  1. 3
  2. 4
  3. 5
  4. 6
Answer and explanation

Answer: C

Hexane, 2-methylpentane, 3-methylpentane, 2,2-dimethylbutane and 2,3-dimethylbutane: five in all.

Assertion (A): To make m-bromonitrobenzene from benzene, nitration should be carried out before bromination.
Reason (R): The nitro group is a meta-directing group.

  1. Both A and R are true, and R is the correct explanation of A
  2. Both A and R are true, but R is not the correct explanation of A
  3. A is true, but R is false
  4. A is false, but R is true
Answer and explanation

Answer: A

Once –NO₂ is on the ring, it sends the incoming Br to the meta position. Brominating first would give mainly o- and p-bromonitrobenzene, because Br directs ortho/para. R explains A.

All six C–C bonds in benzene are 139 pm long. What does this show?

  1. Benzene has three isolated double bonds
  2. The π electrons are delocalised over the whole ring
  3. Benzene is not planar
  4. Benzene contains only single bonds
Answer and explanation

Answer: B

Isolated single and double bonds would give two different lengths (154 and 133 pm). One length in between means each bond is the same, which fits six π electrons spread evenly around the ring.

Which group is ortho/para directing but deactivating?

  1. –OH
  2. –NO₂
  3. –Cl
  4. –CH₃
Answer and explanation

Answer: C

Halogens withdraw electrons by the –I effect, lowering the reactivity of the ring, but their lone pairs supply electrons by resonance to the ortho and para positions. –OH and –CH₃ are activating; –NO₂ is meta directing.

What is the electrophile in the nitration of benzene?

  1. NO₂⁻
  2. NO₃⁻
  3. HSO₄⁻
  4. NO₂⁺
Answer and explanation

Answer: D

Nitric acid accepts a proton from sulphuric acid and then loses water, producing the nitronium ion NO₂⁺, the electrophile that attacks the ring.

Which species is aromatic?

  1. Cyclopentadiene, C₅H₆
  2. Cyclopentadienyl anion, C₅H₅⁻
  3. Cyclooctatetraene, C₈H₈
  4. Cyclohexene, C₆H₁₀
Answer and explanation

Answer: B

C₅H₅⁻ is planar, fully delocalised and has 6 π electrons (4n + 2 with n = 1). Cyclopentadiene has an sp³ CH₂ that breaks delocalisation, cyclooctatetraene has 8 π electrons and is not planar, and cyclohexene has only one double bond.

Privacy · Terms · Refunds · Delivery