CBSE Class 11 Physics
Practice questions
Assertion (A): A small drop of liquid with no external forces on it takes a spherical shape. Reason (R): For a given volume a sphere has the least surface area, and so the least surface energy.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Answer and explanation
Answer: A
Surface molecules carry extra energy, so a liquid takes the shape with the smallest surface area for its volume. That shape is a sphere, so R correctly explains A.
How high does water rise in a clean glass tube of radius 0.20 mm? (S = 0.073 N m⁻¹, angle of contact ≈ 0)
- 3.7 cm
- 14.9 cm
- 0.74 cm
- 7.4 cm
Answer and explanation
Answer: D
h = 2S cos θ/(ρga) = 2 × 0.073 × 1/(1000 × 9.8 × 2.0 × 10⁻⁴) = 0.146/1.96 = 0.0745 m ≈ 7.4 cm.
What is the excess pressure inside a water drop of radius 0.50 mm? (S = 0.073 N m⁻¹)
- 146 Pa
- 292 Pa
- 584 Pa
- 73 Pa
Answer and explanation
Answer: B
A drop has one surface: Pi − Po = 2S/r = 2 × 0.073/(5.0 × 10⁻⁴) = 0.146/0.0005 = 292 Pa. The 4S/r formula, which would give 584 Pa, is for a soap bubble.
A plate of area 0.10 m² slides at 0.10 m s⁻¹ over a liquid film 0.50 mm thick whose viscosity is 0.50 Pa s. What force keeps it moving at constant speed?
- 1.0 N
- 0.10 N
- 100 N
- 10 N
Answer and explanation
Answer: D
η = Fl/(Av), so F = ηAv/l = 0.50 × 0.10 × 0.10/(5.0 × 10⁻⁴) = 0.0050/0.00050 = 10 N.
Why does a raindrop falling through air eventually move at constant speed?
- Gravity stops acting on it
- The viscous drag, which grows with speed, plus the buoyant force becomes equal to its weight
- Air pressure below it becomes zero
- Its mass keeps decreasing as it falls
Answer and explanation
Answer: B
Stokes' drag 6πηav increases with speed. When drag plus buoyancy equals the weight, the net force and the acceleration become zero, so the drop falls at its terminal velocity.
A sphere of radius 2.0 mm and density 2.5 × 10³ kg m⁻³ falls through a liquid of density 1.0 × 10³ kg m⁻³ and viscosity 1.0 Pa s (made-up values). Its terminal velocity is about
- 1.3 cm s⁻¹
- 0.65 cm s⁻¹
- 5.2 cm s⁻¹
- 13 cm s⁻¹
Answer and explanation
Answer: A
vt = 2a²(ρ − σ)g/(9η) = 2 × (2.0 × 10⁻³)² × 1.5 × 10³ × 9.8/(9 × 1.0) = 0.1176/9 = 0.0131 m s⁻¹ ≈ 1.3 cm s⁻¹.
In a wind-tunnel test (made-up data) the air speed is 50 m s⁻¹ over a model wing and 45 m s⁻¹ under it. The wing area is 10 m² and the air density 1.2 kg m⁻³. What is the lift?
- 285 N
- 600 N
- 2850 N
- 5700 N
Answer and explanation
Answer: C
ΔP = ½ρ(v_top² − v_bottom²) = 0.6 × (2500 − 2025) = 0.6 × 475 = 285 Pa. Lift = ΔP × A = 285 × 10 = 2850 N. The value 285 is the pressure difference, not the force.
Bernoulli's equation reduces to P₁ − P₂ = ρg(h₂ − h₁) when
- the fluid is at rest
- the fluid is highly viscous
- the flow is turbulent
- the pipe is horizontal
Answer and explanation
Answer: A
With v₁ = v₂ = 0 the kinetic terms vanish and the equation becomes the hydrostatic result P₁ + ρgh₁ = P₂ + ρgh₂. A horizontal pipe removes the height terms instead, and viscous or turbulent flow lies outside the equation altogether.
In a horizontal pipe the pressure is 1.5 × 10⁵ Pa where water moves at 2.0 m s⁻¹. What is the pressure where the water moves at 8.0 m s⁻¹?
- 1.2 × 10⁵ Pa
- 1.8 × 10⁵ Pa
- 1.47 × 10⁵ Pa
- 0.9 × 10⁵ Pa
Answer and explanation
Answer: A
P₂ = P₁ − ½ρ(v₂² − v₁²) = 1.5 × 10⁵ − 500 × (64 − 4) = 1.5 × 10⁵ − 3.0 × 10⁴ = 1.2 × 10⁵ Pa. Faster flow means lower pressure.
Water flows at 2.0 m s⁻¹ through a hose of cross-section 4.0 cm² and leaves through a nozzle of cross-section 0.50 cm². What is its speed at the nozzle?
- 0.25 m s⁻¹
- 8.0 m s⁻¹
- 16 m s⁻¹
- 32 m s⁻¹
Answer and explanation
Answer: C
Continuity: A₁v₁ = A₂v₂, so v₂ = 4.0 × 2.0/0.50 = 16 m s⁻¹.
A barometer is made with an oil of density 900 kg m⁻³. On a day when the atmospheric pressure is 1.013 × 10⁵ Pa, the oil column would be about
- 0.76 m
- 8.7 m
- 11.5 m
- 113 m
Answer and explanation
Answer: C
h = Pa/(ρg) = 1.013 × 10⁵/(900 × 9.8) = 1.013 × 10⁵/8820 ≈ 11.5 m.
In a hydraulic lift the small piston has diameter 2.0 cm and the large piston 10 cm. A force of 150 N on the small piston can support what load on the large piston?
- 750 N
- 3750 N
- 30 N
- 1.5 × 10⁴ N
Answer and explanation
Answer: B
F₂ = F₁ × A₂/A₁ and the area ratio is the square of the diameter ratio: (10/2.0)² = 25. F₂ = 150 × 25 = 3750 N. Using the diameter ratio alone gives 750 N.
Assertion (A): The pressure at the bottom of a vessel of water depends on the shape of the vessel. Reason (R): The pressure at depth h in a liquid open to the air is P = Pa + ρgh.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Answer and explanation
Answer: D
R is true, and it shows that the pressure depends only on the depth, the density and Pa. The shape and the amount of water do not appear, so A is false (the hydrostatic paradox).
A U-tube holds mercury (relative density 13.6). Water is poured into one arm until the water column is 27.2 cm tall above the mercury it rests on. How much higher does the mercury stand in the other arm than the water-mercury surface?
- 27.2 cm
- 13.6 cm
- 1.0 cm
- 2.0 cm
Answer and explanation
Answer: D
Points at the same level in the mercury are at the same pressure, so 27.2 cm of water balances h of mercury: 1000 × g × 27.2 = 13 600 × g × h, giving h = 27.2/13.6 = 2.0 cm.
What is the absolute pressure on a swimmer 15 m below the surface of a freshwater lake?
- 1.47 × 10⁵ Pa
- 2.48 × 10⁵ Pa
- 1.16 × 10⁵ Pa
- 3.49 × 10⁵ Pa
Answer and explanation
Answer: B
P = Pa + ρgh = 1.01 × 10⁵ + 1000 × 9.8 × 15 = 1.01 × 10⁵ + 1.47 × 10⁵ = 2.48 × 10⁵ Pa. The value 1.47 × 10⁵ Pa is only the gauge pressure.
Why are detergents added to water for washing clothes?
- They increase the surface tension and the angle of contact
- They raise the density of water
- They make water more viscous
- They reduce the angle of contact so that water wets and penetrates the fibres
Answer and explanation
Answer: D
Detergents are wetting agents. They lower the angle of contact between water and the fibres, so water spreads into the narrow spaces of the fabric and carries the dirt away. Waterproofing agents do the opposite.
Water rises 3.0 cm in a capillary tube. In a tube of the same glass with half the radius, the rise would be
- 1.5 cm
- 6.0 cm
- 12 cm
- 3.0 cm
Answer and explanation
Answer: B
h = 2S cos θ/(ρga), so h ∝ 1/a. Halving the radius doubles the rise: 2 × 3.0 = 6.0 cm.
A glass capillary tube is dipped into mercury. What happens to the mercury inside the tube?
- It rises above the outside level, with a concave meniscus
- It stays exactly level with the outside
- It is depressed below the outside level, with a convex meniscus
- It rises because mercury is very dense
Answer and explanation
Answer: C
Mercury does not wet glass, so its angle of contact is obtuse and cos θ is negative. Then h = 2S cos θ/(ρga) is negative: the mercury is pushed below the outside level and its surface is convex.
What is the excess pressure inside a soap bubble of radius 1.0 cm if the surface tension of the soap solution is 0.030 N m⁻¹?
- 6.0 Pa
- 3.0 Pa
- 12 Pa
- 0.12 Pa
Answer and explanation
Answer: C
A soap bubble has two surfaces, so Pi − Po = 4S/r = 4 × 0.030/0.010 = 12 Pa. Using 2S/r, the formula for a drop, would give only 6.0 Pa.
Which of these is a correct SI unit of surface tension?
- J m⁻²
- N m⁻²
- N m
- J m⁻¹
Answer and explanation
Answer: A
Surface tension is force per unit length (N m⁻¹) and also energy per unit area (J m⁻²). These are the same, since J m⁻² = N m/m² = N m⁻¹. N m⁻² is the unit of pressure.