Chapter 2 Electrochemistry
Practice questions
Assertion (A): Iron rusts faster in water that contains dissolved carbon dioxide or other acidic oxides. Reason (R): The cathodic reaction of rusting, O₂ + 4H⁺ + 4e⁻ → 2H₂O, uses hydrogen ions.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Answer and explanation
Answer: A
Both are true. Dissolved CO₂ forms carbonic acid, supplying H⁺ ions needed for the reduction of oxygen at cathodic spots. More H⁺ speeds up this half-reaction and so the whole corrosion cell. R explains A.
Which change happens when a lead storage battery is recharged?
- PbO₂ is converted into PbSO₄ at both electrodes
- PbSO₄ is converted into Pb at one electrode and PbO₂ at the other, and H₂SO₄ is regenerated
- Lead is converted into PbO₂ at the anode
- Water is converted into H₂ and O₂ only
Answer and explanation
Answer: B
Charging reverses the discharge reaction: 2PbSO₄ + 2H₂O → Pb + PbO₂ + 2H₂SO₄. Lead sulphate becomes lead at the negative plate and lead dioxide at the positive plate, and the acid concentration rises again.
What are the products when an aqueous solution of CuSO₄ is electrolysed with platinum electrodes?
- Copper at the cathode and O₂ at the anode
- H₂ at the cathode and O₂ at the anode
- Copper at the cathode and SO₂ at the anode
- H₂ at the cathode and the platinum anode dissolves
Answer and explanation
Answer: A
At the cathode, Cu²⁺ (E° = +0.34 V) is reduced much more readily than water (−0.83 V), so copper is deposited. Platinum is inert, and at the anode water is oxidised (2H₂O → O₂ + 4H⁺ + 4e⁻) in preference to sulphate ions, so oxygen is evolved and the solution becomes acidic.
A current of 3.0 A is passed through a nickel(II) sulphate solution for 40 minutes using platinum electrodes. What mass of nickel is deposited? (Ni = 58.7 g mol⁻¹)
- 4.38 g
- 1.10 g
- 0.55 g
- 2.19 g
Answer and explanation
Answer: D
Q = 3.0 × 2400 = 7200 C. n(e⁻) = 7200 ÷ 96 500 = 0.0746 mol. Ni²⁺ + 2e⁻ → Ni, so n(Ni) = 0.0373 mol. Mass = 0.0373 × 58.7 = 2.19 g.
How many faradays are needed to produce 13.5 g of aluminium from molten Al₂O₃? (Al = 27 g mol⁻¹)
- 0.5 F
- 3 F
- 1.5 F
- 4.5 F
Answer and explanation
Answer: C
n(Al) = 13.5 ÷ 27 = 0.50 mol. Al³⁺ + 3e⁻ → Al, so electrons = 3 × 0.50 = 1.5 mol = 1.5 F.
For a strong electrolyte, a graph of Λm (y-axis) against √c (x-axis) is a straight line. What do its intercept and slope give?
- Intercept = Λ°m, slope = −A
- Intercept = −A, slope = Λ°m
- Intercept = κ, slope = Λ°m
- Intercept = 0, slope = Λ°m
Answer and explanation
Answer: A
Λm = Λ°m − A√c has the form y = c + mx with intercept Λ°m (the value at zero concentration) and slope −A.
A dilute solution of a weak acid HA has Λm = 19.5 S cm² mol⁻¹, and its Λ°m is 390 S cm² mol⁻¹. What is its degree of dissociation?
- 0.005
- 0.5
- 0.20
- 0.05
Answer and explanation
Answer: D
α = Λm ÷ Λ°m = 19.5 ÷ 390 = 0.05, i.e. 5% dissociated.
Λ°m values of HCl, CH₃COONa and NaCl are 425.9, 91.0 and 126.4 S cm² mol⁻¹. What is Λ°m of CH₃COOH?
- 643.3 S cm² mol⁻¹
- 390.5 S cm² mol⁻¹
- 208.5 S cm² mol⁻¹
- 461.3 S cm² mol⁻¹
Answer and explanation
Answer: B
By Kohlrausch's law, Λ°m(CH₃COOH) = Λ°m(HCl) + Λ°m(CH₃COONa) − Λ°m(NaCl) = 425.9 + 91.0 − 126.4 = 390.5 S cm² mol⁻¹. The Na⁺ and Cl⁻ contributions cancel.
A conductivity cell has a cell constant of 0.50 cm⁻¹. Filled with a 0.010 M solution, its resistance is 400 Ω. What is the molar conductivity?
- 12.5 S cm² mol⁻¹
- 250 S cm² mol⁻¹
- 125 S cm² mol⁻¹
- 1.25 S cm² mol⁻¹
Answer and explanation
Answer: C
κ = G* ÷ R = 0.50 ÷ 400 = 1.25 × 10⁻³ S cm⁻¹. Λm = κ × 1000 ÷ M = 1.25 × 10⁻³ × 1000 ÷ 0.010 = 125 S cm² mol⁻¹.
For the reaction Zn + Cu²⁺ → Zn²⁺ + Cu, ΔrG° is −212 kJ mol⁻¹. What is ΔrG° for 2Zn + 2Cu²⁺ → 2Zn²⁺ + 2Cu, and what is E°cell for it?
- −424 kJ mol⁻¹ and 1.1 V
- −424 kJ mol⁻¹ and 2.2 V
- −212 kJ mol⁻¹ and 2.2 V
- −212 kJ mol⁻¹ and 1.1 V
Answer and explanation
Answer: A
ΔrG is extensive: doubling the equation doubles n (from 2 to 4) and doubles ΔrG° to −424 kJ mol⁻¹. E°cell is intensive and stays the same: E° = −ΔrG° ÷ nF = 424 000 ÷ (4 × 96 500) ≈ 1.1 V.
For a cell reaction with n = 2 and E°cell = 0.295 V at 298 K, what is the equilibrium constant?
- 10⁵
- 10²⁰
- 10⁵⁰
- 10¹⁰
Answer and explanation
Answer: D
log K = (n × E°cell) ÷ 0.059 = (2 × 0.295) ÷ 0.059 = 10, so K = 10¹⁰.
What is the emf at 298 K of Mg | Mg²⁺(0.010 M) || Cu²⁺(0.10 M) | Cu? (E°cell = 2.70 V)
- 2.73 V
- 2.67 V
- 2.76 V
- 2.64 V
Answer and explanation
Answer: A
Q = [Mg²⁺] ÷ [Cu²⁺] = 0.010 ÷ 0.10 = 0.1; log Q = −1; n = 2. E = 2.70 − (0.059 ÷ 2) × (−1) = 2.70 + 0.0295 = 2.73 V.
Assertion (A): The standard hydrogen electrode is assigned an electrode potential of zero. Reason (R): The absolute potential of a single half-cell cannot be measured, so a reference electrode is needed.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Answer and explanation
Answer: A
Both are true. Only potential differences between two electrodes can be measured, so a reference half-cell is fixed at zero by convention, and the SHE was chosen. R explains A.
Which metal, among Cu, Fe, Mg and Zn, can displace all the other three from solutions of their salts?
- Mg
- Zn
- Fe
- Cu
Answer and explanation
Answer: A
A metal displaces another if its E° is lower. Order of E°: Mg (−2.36) < Zn (−0.76) < Fe (−0.44) < Cu (+0.34). Magnesium has the lowest E°, so it is the strongest reducing agent and displaces all the others.
Using E°(Ni²⁺/Ni) = −0.25 V and E°(Ag⁺/Ag) = +0.80 V, which statement about the cell Ni | Ni²⁺ || Ag⁺ | Ag is correct?
- Silver is the anode and E°cell = 0.55 V
- Nickel is the cathode and E°cell = 1.05 V
- Nickel is the anode and E°cell = 1.05 V
- Nickel is the anode and E°cell = 0.55 V
Answer and explanation
Answer: C
Nickel, written on the left with the lower E°, is oxidised, so it is the anode. E°cell = E°cathode − E°anode = 0.80 − (−0.25) = 1.05 V.
Assertion (A): Fuel cells are more efficient than thermal power plants at producing electricity. Reason (R): A fuel cell converts the chemical energy of a fuel directly into electrical energy without first producing heat and steam.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Answer and explanation
Answer: A
Both are true. A thermal plant converts chemical energy to heat, heat to mechanical energy and that to electricity, losing energy at each step (about 40% efficient). A fuel cell does it in one electrochemical step (about 70%). R explains A.
Iron is protected by joining it to a block of magnesium. Why does this work?
- Magnesium forms an alloy with iron
- Magnesium makes the water less acidic
- Magnesium has a lower E° than iron, so it acts as the anode and corrodes instead
- Magnesium has a higher E° than iron, so iron becomes the anode
Answer and explanation
Answer: C
E°(Mg²⁺/Mg) = −2.36 V is much lower than E°(Fe²⁺/Fe) = −0.44 V. Magnesium is oxidised in preference, giving electrons to the iron, which becomes the cathode and is protected. The magnesium is 'sacrificed' and must be replaced from time to time.
Which reaction occurs at the cathode of an H₂–O₂ fuel cell with an alkaline electrolyte?
- 2H₂ + 4OH⁻ → 4H₂O + 4e⁻
- O₂ + 2H₂O + 4e⁻ → 4OH⁻
- 2H₂O → O₂ + 4H⁺ + 4e⁻
- H₂ → 2H⁺ + 2e⁻
Answer and explanation
Answer: B
Reduction happens at the cathode. Oxygen gains electrons and, with water, forms hydroxide ions: O₂ + 2H₂O + 4e⁻ → 4OH⁻. The oxidation of hydrogen with OH⁻ happens at the anode.
What is formed at both electrodes of a lead storage battery during discharge?
- Pb
- PbO₂
- H₂SO₄
- PbSO₄
Answer and explanation
Answer: D
At the anode Pb + SO₄²⁻ → PbSO₄ + 2e⁻, and at the cathode PbO₂ + SO₄²⁻ + 4H⁺ + 2e⁻ → PbSO₄ + 2H₂O. Lead sulphate forms on both, and sulphuric acid is used up.
Why does the voltage of a mercury cell stay almost constant throughout its life?
- The overall reaction involves no ion whose concentration changes
- Mercury is a liquid
- It uses a salt bridge
- Zinc is not consumed
Answer and explanation
Answer: A
Overall: Zn(Hg) + HgO(s) → ZnO(s) + Hg(l). All reactants and products are solids or a pure liquid, so the Nernst equation has no changing concentration term, and E stays constant.