Chapter 4 The d- and f-Block Elements

Practice questions

Which actinoid shows the highest oxidation state, +7?

  1. Thorium
  2. Uranium
  3. Neptunium
  4. Lawrencium
Answer and explanation

Answer: C

The maximum oxidation state rises from +4 (Th) through +5 (Pa) and +6 (U) to +7 for neptunium (and plutonium), then falls for later actinoids.

Which is a consequence of the lanthanoid contraction?

  1. Hf and Zr have almost identical radii and are difficult to separate
  2. Lanthanoids show oxidation states up to +7
  3. The basic strength of Ln(OH)₃ increases from La to Lu
  4. All lanthanoids are radioactive
Answer and explanation

Answer: A

The contraction cancels the expected size increase from the 4d to the 5d series, so Zr (160 pm) and Hf (159 pm) are nearly the same size and very alike chemically. Basicity of Ln(OH)₃ actually decreases from La to Lu, and only promethium is radioactive.

Which lanthanoid has the configuration [Xe] 4f⁷ 5d¹ 6s² and forms a very stable +3 ion?

  1. Europium
  2. Cerium
  3. Ytterbium
  4. Gadolinium
Answer and explanation

Answer: D

Gadolinium (Z = 64) keeps the half-filled 4f⁷ set and places one electron in 5d. Gd³⁺ is [Xe]4f⁷, a stable half-filled arrangement; this is also why the third ionisation enthalpy of Gd is unusually low.

Which statement about the chromate and dichromate ions is correct?

  1. Chromium is +6 in chromate and +7 in dichromate
  2. Dichromate is two tetrahedra sharing a corner, and chromium is +6 in both
  3. Chromate is orange and dichromate yellow
  4. Dichromate is formed when alkali is added to chromate
Answer and explanation

Answer: B

In CrO₄²⁻: x − 8 = −2 → +6; in Cr₂O₇²⁻: 2x − 14 = −2 → +6. Dichromate is two CrO₄ tetrahedra sharing one oxygen (Cr–O–Cr 126°). It is orange, chromate is yellow, and dichromate forms when acid is added.

In neutral or faintly alkaline solution, permanganate oxidises iodide. What are the products?

  1. I₂ and Mn²⁺
  2. I₂ and MnO₄²⁻
  3. IO₃⁻ and MnO₂
  4. IO₄⁻ and Mn²⁺
Answer and explanation

Answer: C

In neutral or faintly alkaline medium, permanganate is reduced to MnO₂ and iodide is oxidised to iodate: 2MnO₄⁻ + H₂O + I⁻ → 2MnO₂ + 2OH⁻ + IO₃⁻. In acid, by contrast, iodine and Mn²⁺ are formed.

How many moles of Fe²⁺ are oxidised by 0.020 mol of K₂Cr₂O₇ in acidic solution?

  1. 0.040 mol
  2. 0.12 mol
  3. 0.10 mol
  4. 0.060 mol
Answer and explanation

Answer: B

Cr₂O₇²⁻ + 14H⁺ + 6Fe²⁺ → 2Cr³⁺ + 6Fe³⁺ + 7H₂O. Each mole of dichromate oxidises 6 mol of Fe²⁺, so 0.020 × 6 = 0.12 mol.

Which property is NOT typical of interstitial compounds of transition metals?

  1. High melting point
  2. Great hardness
  3. Exact stoichiometric formulas such as TiC₂ matching normal oxidation states
  4. Metallic conductivity
Answer and explanation

Answer: C

Interstitial compounds are usually non-stoichiometric (e.g. VH₀.₅₆, TiH₁.₇), and their formulas do not correspond to normal oxidation states. They are hard, high-melting and keep metallic conductivity.

Which pair of ions are both colourless in water?

  1. Ti⁴⁺ and Zn²⁺
  2. Cu²⁺ and Zn²⁺
  3. Ti³⁺ and Sc³⁺
  4. Fe²⁺ and Ni²⁺
Answer and explanation

Answer: A

Ti⁴⁺ is 3d⁰ and Zn²⁺ is 3d¹⁰; neither can undergo a d–d transition, so both are colourless. Cu²⁺, Ti³⁺, Fe²⁺ and Ni²⁺ have partly filled d subshells and are coloured.

A 3d ion M²⁺ has a spin-only magnetic moment of 5.92 BM. What is M?

  1. Fe
  2. Co
  3. Cr
  4. Mn
Answer and explanation

Answer: D

5.92 BM corresponds to n = 5 (√35). An M²⁺ ion with five unpaired electrons is d⁵, which is Mn²⁺ (Mn: 3d⁵4s²).

Assertion (A): Mn³⁺ is a strong oxidising agent. Reason (R): Mn³⁺ (d⁴) gains an electron to become Mn²⁺, which has the extra-stable d⁵ configuration.

  1. Both A and R are true, and R is the correct explanation of A
  2. Both A and R are true, but R is not the correct explanation of A
  3. A is true, but R is false
  4. A is false, but R is true
Answer and explanation

Answer: A

Both are true. E°(Mn³⁺/Mn²⁺) = +1.57 V is high because reduction produces the half-filled d⁵ Mn²⁺. R explains A.

Which species is expected to disproportionate in aqueous solution?

  1. Zn²⁺
  2. Cu⁺
  3. Fe³⁺
  4. Sc³⁺
Answer and explanation

Answer: B

2Cu⁺ → Cu²⁺ + Cu has E°cell = E°(Cu⁺/Cu) − E°(Cu²⁺/Cu⁺) = 0.52 − 0.15 = +0.37 V, so it is spontaneous. Zn²⁺, Fe³⁺ and Sc³⁺ are stable in water.

Which of the following correctly explains why E°(Cu²⁺/Cu) is positive while the other 3d metals have negative values?

  1. Copper has a very low enthalpy of atomisation
  2. Cu²⁺ has a very small hydration enthalpy
  3. The energy to atomise and ionise copper is not compensated by the hydration enthalpy of Cu²⁺
  4. Copper has a half-filled d subshell
Answer and explanation

Answer: C

Turning Cu(s) into Cu²⁺(aq) needs a high enthalpy of atomisation plus a high sum of first and second ionisation enthalpies. The hydration enthalpy released does not make up for this, so the overall change is unfavourable and E° is positive (+0.34 V).

In the 3d series, which metal has the lowest enthalpy of atomisation, and why?

  1. Chromium, because it has a half-filled 3d set
  2. Iron, because of its high density
  3. Scandium, because it has only one d electron
  4. Zinc, because its d electrons do not take part in metallic bonding
Answer and explanation

Answer: D

Zinc's 3d¹⁰ electrons are not used in metallic bonding, so only the 4s² electrons hold the atoms together. Its bonding is weakest and its enthalpy of atomisation the lowest of the series (about 126 kJ mol⁻¹).

Silver has a completely filled 4d subshell in its ground state. Why is it still classed as a transition element?

  1. Its Ag²⁺ ion has an incomplete 4d subshell (4d⁹)
  2. It is a coinage metal
  3. It forms coloured compounds in all oxidation states
  4. It has a 5s² configuration
Answer and explanation

Answer: A

The definition needs an incomplete d subshell in the atom OR in an ion. In its +2 state silver is 4d⁹, which is incomplete, so it qualifies.

Which of these ions has the same number of d electrons as Fe³⁺?

  1. Fe²⁺
  2. Mn²⁺
  3. Co³⁺
  4. Cr³⁺
Answer and explanation

Answer: B

Fe³⁺ is [Ar]3d⁵. Mn²⁺ is also [Ar]3d⁵ (Mn: 3d⁵4s², minus the two 4s electrons). Fe²⁺ and Co³⁺ are 3d⁶ and Cr³⁺ is 3d³.

Assertion (A): The actinoid contraction is greater from element to element than the lanthanoid contraction. Reason (R): 5f electrons shield one another from the nuclear charge more effectively than 4f electrons do.

  1. Both A and R are true, and R is the correct explanation of A
  2. Both A and R are true, but R is not the correct explanation of A
  3. A is true, but R is false
  4. A is false, but R is true
Answer and explanation

Answer: C

A is true. R is false: the contraction is greater because 5f electrons shield one another even LESS effectively than 4f electrons, so each added unit of nuclear charge pulls the electrons in more.

Why do the actinoids show a wider range of oxidation states than the lanthanoids?

  1. They have smaller atoms
  2. They are not radioactive
  3. Their 4f electrons are deeply buried
  4. The 5f, 6d and 7s levels are close in energy, so more electrons can be used
Answer and explanation

Answer: D

In the actinoids the 5f, 6d and 7s orbitals have comparable energies and the 5f orbitals are less buried than 4f, so varying numbers of electrons can be lost or shared, giving states up to +7.

What is the spin-only magnetic moment of Gd³⁺ (4f⁷)?

  1. 7.94 BM
  2. 5.92 BM
  3. 6.93 BM
  4. 8.97 BM
Answer and explanation

Answer: A

4f⁷ has seven unpaired electrons, one in each f orbital. μ = √[7 × (7 + 2)] = √63 = 7.94 BM.

Which lanthanoid ion is a good oxidising agent because it readily changes to the +3 state?

  1. Eu²⁺
  2. Yb²⁺
  3. Ce⁴⁺
  4. La³⁺
Answer and explanation

Answer: C

Ce⁴⁺ (4f⁰) readily gains an electron to form the common Ce³⁺, so it is an oxidising agent (E° = +1.74 V). Eu²⁺ and Yb²⁺ are reducing agents, since they lose an electron to reach +3; La³⁺ is already in its stable state.

What is the most common oxidation state of the lanthanoids?

  1. +2
  2. +3
  3. +4
  4. +5
Answer and explanation

Answer: B

All lanthanoids form Ln³⁺, which has the regular [Xe]4fⁿ configuration. +2 and +4 occur only for a few elements where f⁰, f⁷ or f¹⁴ stability helps.

Privacy · Terms · Refunds · Delivery