Chapter 7 Alcohols, Phenols and Ethers

Practice questions

Bromination of anisole in ethanoic acid gives mainly which product?

  1. m-Bromoanisole
  2. Bromobenzene and methanol
  3. p-Bromoanisole
  4. 2,4,6-Tribromoanisole only
Answer and explanation

Answer: C

The methoxy group activates the ring and directs ortho/para; the para position is less crowded, so p-bromoanisole is the main product (about 90%), with some o-bromoanisole. No FeBr₃ is needed.

What are the products of heating CH₃–O–CH₂CH₃ with one equivalent of HI?

  1. CH₃I and CH₃CH₂OH
  2. CH₃OH and CH₃CH₂I
  3. CH₃I and CH₃CH₂I only
  4. CH₄ and CH₃CH₂OH
Answer and explanation

Answer: A

Both groups are primary, so the reaction is SN2 and I⁻ attacks the less hindered carbon, the methyl group. Methyl iodide and ethanol form. (With excess HI, ethanol would go on to ethyl iodide.)

Which method is suitable for preparing methoxyethane?

  1. Heating a mixture of methanol and ethanol with concentrated H₂SO₄ at 413 K
  2. Sodium ethoxide with bromomethane
  3. Ethanol with HI
  4. Methanol with sodium metal only
Answer and explanation

Answer: B

Williamson synthesis with a methyl halide and sodium ethoxide gives methoxyethane cleanly by SN2. Acid dehydration of a mixture of two alcohols would give three ethers (dimethyl, diethyl and ethyl methyl) together.

Assertion (A): Picric acid is made by sulphonating phenol first and then nitrating, rather than by direct nitration with concentrated HNO₃. Reason (R): Direct nitration of phenol with concentrated nitric acid gives a poor yield.

  1. Both A and R are true, and R is the correct explanation of A
  2. Both A and R are true, but R is not the correct explanation of A
  3. A is true, but R is false
  4. A is false, but R is true
Answer and explanation

Answer: A

Both are true. Concentrated nitric acid also oxidises the very reactive phenol, so the direct yield of 2,4,6-trinitrophenol is poor. Converting phenol to phenol-2,4-disulphonic acid first and then nitrating gives a better yield. R explains A.

Phenol is treated with sodium hydroxide and then with CO₂ under pressure, and finally acidified. What is the product?

  1. Salicylaldehyde
  2. Salicylic acid
  3. Benzoic acid
  4. Picric acid
Answer and explanation

Answer: B

This is Kolbe's reaction: the phenoxide ion is attacked by the weak electrophile CO₂ at the ortho position; acidification gives o-hydroxybenzoic acid, salicylic acid.

What is formed when the vapour of 2-methylpropan-2-ol is passed over copper heated to 573 K?

  1. 2-Methylpropanal
  2. Propanone
  3. 2-Methylpropanoic acid
  4. 2-Methylpropene
Answer and explanation

Answer: D

Hot copper dehydrogenates 1° and 2° alcohols, but a tertiary alcohol has no hydrogen on the carbinol carbon, so it is dehydrated instead, giving the alkene 2-methylpropene.

Which observation is correct for the Lucas test at room temperature?

  1. Propan-2-ol gives turbidity instantly
  2. 2-Methylpropan-2-ol gives turbidity immediately; butan-1-ol gives none
  3. Butan-1-ol gives turbidity immediately
  4. None of the alcohols react
Answer and explanation

Answer: B

Tertiary alcohols form alkyl chlorides fastest (stable tertiary carbocation), so 2-methylpropan-2-ol turns cloudy at once. Primary alcohols such as butan-1-ol give no turbidity at room temperature; secondary alcohols react after a while.

The pKa of a substituted phenol is 7.0 and that of phenol is 10.0. How many times stronger an acid is the substituted phenol?

  1. 3 times
  2. 30 times
  3. 1000 times
  4. 10 000 times
Answer and explanation

Answer: C

Ka = 10^(−pKa), so the ratio is 10^(10.0 − 7.0) = 10³ = 1000.

Which arrangement shows increasing acid strength?

  1. Phenol < ethanol < p-nitrophenol
  2. p-Cresol < phenol < ethanol
  3. Ethanol < p-nitrophenol < phenol
  4. Ethanol < p-cresol < phenol < p-nitrophenol
Answer and explanation

Answer: D

pKa: ethanol 15.9, p-cresol 10.2, phenol 10.0, p-nitrophenol 7.1. A larger pKa means a weaker acid, so the order of increasing strength is ethanol < p-cresol < phenol < p-nitrophenol.

In the cumene process, 240 g of cumene (120 g mol⁻¹) is fully converted. What mass of phenol (94 g mol⁻¹) and of acetone (58 g mol⁻¹) forms?

  1. 94 g phenol and 58 g acetone
  2. 188 g phenol and 116 g acetone
  3. 188 g phenol and 58 g acetone
  4. 240 g phenol and 116 g acetone
Answer and explanation

Answer: B

n(cumene) = 240 ÷ 120 = 2.0 mol. Each mole gives 1 mol of phenol and 1 mol of acetone: phenol = 2.0 × 94 = 188 g; acetone = 2.0 × 58 = 116 g.

Which pair gives butan-2-ol after hydrolysis?

  1. C₂H₅MgBr + CH₃CHO
  2. CH₃MgBr + CH₃COCH₃
  3. C₃H₇MgBr + HCHO
  4. CH₃MgBr + HCHO
Answer and explanation

Answer: A

Ethylmagnesium bromide adds to ethanal: CH₃CHO + C₂H₅MgBr → CH₃CH(OMgBr)C₂H₅ → CH₃CH(OH)C₂H₅, butan-2-ol. The other pairs give 2-methylpropan-2-ol, butan-1-ol and ethanol.

Which alcohol is formed when 2-methylpropene undergoes hydroboration–oxidation?

  1. 2-Methylpropan-2-ol
  2. Butan-1-ol
  3. 2-Methylpropan-1-ol
  4. Butan-2-ol
Answer and explanation

Answer: C

Boron adds to the CH₂ end (the carbon with more hydrogens) and is replaced by –OH, giving (CH₃)₂CHCH₂OH, 2-methylpropan-1-ol: the anti-Markovnikov result. Acid-catalysed hydration would give 2-methylpropan-2-ol.

Assertion (A): The C–O–C bond angle in ethers is slightly greater than the tetrahedral angle. Reason (R): The two bulky alkyl groups on oxygen repel each other.

  1. Both A and R are true, and R is the correct explanation of A
  2. Both A and R are true, but R is not the correct explanation of A
  3. A is true, but R is false
  4. A is false, but R is true
Answer and explanation

Answer: A

Both are true. In methoxymethane the angle is about 111.7°, above 109.5°, because repulsion between the two alkyl groups outweighs the lone-pair effect that narrows the angle in alcohols. R explains A.

What is the IUPAC name of C₆H₅OC₂H₅?

  1. Phenoxyethane
  2. Ethoxybenzene
  3. Ethyl phenol
  4. Phenyl ethanol
Answer and explanation

Answer: B

In ethers the larger group is the parent hydrocarbon and the smaller one is named as alkoxy: the benzene ring is the parent, giving ethoxybenzene (common name phenetole).

How many structural isomers with formula C₄H₁₀O are alcohols, and how many are ethers?

  1. 3 alcohols and 4 ethers
  2. 4 alcohols and 2 ethers
  3. 4 alcohols and 3 ethers
  4. 5 alcohols and 3 ethers
Answer and explanation

Answer: C

Alcohols: butan-1-ol, butan-2-ol, 2-methylpropan-1-ol, 2-methylpropan-2-ol (4). Ethers: 1-methoxypropane, 2-methoxypropane, ethoxyethane (3).

Assertion (A): The reaction of sodium methoxide with tert-butyl bromide gives 2-methylpropene rather than an ether. Reason (R): Alkoxide ions are strong bases as well as nucleophiles, and the tertiary carbon is too hindered for SN2 attack.

  1. Both A and R are true, and R is the correct explanation of A
  2. Both A and R are true, but R is not the correct explanation of A
  3. A is true, but R is false
  4. A is false, but R is true
Answer and explanation

Answer: A

Both are true. The crowded tertiary carbon blocks SN2 attack, so the alkoxide acts as a base, removing a β-hydrogen and causing elimination to 2-methylpropene. R explains A.

Why is ethoxyethane about as soluble in water as butan-1-ol, although its boiling point is much lower?

  1. Ethoxyethane is ionic
  2. Ethoxyethane has a higher molar mass
  3. The ether oxygen can accept hydrogen bonds from water, though ether molecules cannot hydrogen-bond with each other
  4. Butan-1-ol does not form hydrogen bonds
Answer and explanation

Answer: C

Solubility depends on hydrogen bonding with water, which an ether oxygen can accept. Boiling point depends on attractions between the compound's own molecules, and ether molecules have no O–H to hydrogen-bond with each other, so they boil like alkanes.

What are the products when (CH₃)₃C–O–CH₃ is heated with HI?

  1. (CH₃)₃C–OH and CH₃I
  2. (CH₃)₃C–I and CH₃OH
  3. (CH₃)₂C=CH₂ and CH₃I
  4. (CH₃)₃CH and CH₃OI
Answer and explanation

Answer: B

With a tertiary group, the protonated ether loses methanol to form the stable tertiary carbocation (SN1), which combines with I⁻. So the tertiary group becomes (CH₃)₃C–I and the methyl group leaves as CH₃OH.

What are the products when methoxybenzene (anisole) is heated with HI?

  1. Iodobenzene and methanol
  2. Benzene and methyl iodide
  3. Phenol and methyl iodide
  4. Iodobenzene and methyl iodide
Answer and explanation

Answer: C

The aryl–O bond has partial double bond character and is strong, so I⁻ attacks the methyl carbon of the protonated ether, breaking the CH₃–O bond: C₆H₅OCH₃ + HI → C₆H₅OH + CH₃I.

Which pair of reagents is best for preparing ethyl tert-butyl ether by Williamson synthesis?

  1. (CH₃)₃CBr + C₂H₅ONa
  2. (CH₃)₃CONa + C₂H₅Br
  3. (CH₃)₃COH + C₂H₅OH with conc. H₂SO₄
  4. (CH₃)₃CBr + C₂H₅Br with Na
Answer and explanation

Answer: B

The alkoxide must carry the bulky tertiary group and the halide should be primary, so SN2 can occur. (CH₃)₃CBr with an alkoxide undergoes elimination to 2-methylpropene, and acid dehydration of a tertiary alcohol also gives an alkene.

Privacy · Terms · Refunds · Delivery