Chapter 9 Amines

Practice questions

4.65 g of aniline (93 g mol⁻¹) is diazotised and coupled completely with phenol. What mass of p-hydroxyazobenzene (198 g mol⁻¹) forms?

  1. 4.65 g
  2. 19.8 g
  3. 9.9 g
  4. 1.98 g
Answer and explanation

Answer: C

n(aniline) = 4.65 ÷ 93 = 0.050 mol, giving 0.050 mol of diazonium salt and 0.050 mol of the azo compound. Mass = 0.050 × 198 = 9.9 g.

Which pair of reagents gives the higher yield of chlorobenzene from benzenediazonium chloride?

  1. Cu powder and HCl (Gattermann)
  2. CuCl and HCl (Sandmeyer)
  3. Both give identical yields
  4. Cl₂ gas
Answer and explanation

Answer: B

Both the Sandmeyer (Cu(I) salt) and Gattermann (copper powder with HX) reactions replace –N₂⁺ by Cl, but the Sandmeyer reaction gives the better yield.

Which conversion sequence gives fluorobenzene from aniline?

  1. NaNO₂/HCl at 273 K, then HBF₄, then heat
  2. HF directly
  3. F₂ with FeF₃
  4. NaNO₂/HCl, then KF at room temperature
Answer and explanation

Answer: A

Diazotisation gives benzenediazonium chloride; HBF₄ precipitates benzenediazonium fluoroborate, which decomposes on heating to fluorobenzene, BF₃ and N₂. Direct fluorination is far too violent.

What is the main product when aniline is heated with concentrated H₂SO₄ at 453–473 K?

  1. Sulphanilic acid (p-aminobenzenesulphonic acid)
  2. m-Aminobenzenesulphonic acid
  3. Anilinium hydrogensulphate only
  4. Benzenesulphonic acid
Answer and explanation

Answer: A

Aniline first forms anilinium hydrogensulphate, which on heating at 453–473 K rearranges mainly to p-aminobenzenesulphonic acid, sulphanilic acid.

How can p-nitroaniline be obtained as the major product from aniline?

  1. Direct nitration with conc. HNO₃/H₂SO₄
  2. Acetylation, then nitration, then hydrolysis
  3. Diazotisation, then nitration
  4. Sulphonation at 473 K, then nitration
Answer and explanation

Answer: B

Acetylation tames the –NH₂ group and prevents protonation and oxidation; nitration of acetanilide gives mainly the para product; hydrolysis then gives p-nitroaniline. Direct nitration gives oxidation products and much m-nitroaniline.

An amine C₄H₁₁N reacts with benzenesulphonyl chloride to give a product that dissolves in aqueous KOH. Which could it be?

  1. N,N-Dimethylethanamine
  2. N-Ethylethanamine
  3. Butan-1-amine
  4. N-Methylpropan-2-amine
Answer and explanation

Answer: C

A product soluble in alkali has an acidic N–H, which arises only from a primary amine. Butan-1-amine is primary; the others are secondary (insoluble product) or tertiary (no reaction).

Which reagent distinguishes propan-1-amine from N,N-dimethylethanamine?

  1. Dilute HCl
  2. Chloroform and ethanolic KOH
  3. Red litmus paper
  4. Water
Answer and explanation

Answer: B

Propan-1-amine is a primary amine and gives a foul-smelling isocyanide in the carbylamine test; the tertiary amine does not. Both are basic, dissolve in dilute HCl and turn red litmus blue.

Why is methylamine more basic than ammonia, but trimethylamine less basic than methylamine in water?

  1. Only the inductive effect operates
  2. Solvation of the ammonium ion by hydrogen bonding decreases as N–H hydrogens are replaced, offsetting the +I effect
  3. Trimethylamine has no lone pair
  4. Methylamine is a gas
Answer and explanation

Answer: B

The +I effect of alkyl groups increases basicity, but in water the cation is also stabilised by hydrogen bonding through its N–H hydrogens. (CH₃)₃NH⁺ has only one, so it is poorly solvated, and trimethylamine ends up weaker than methylamine in water.

What is the approximate pH of a 0.010 M solution of an amine with Kb = 1.0 × 10⁻⁴ at 298 K?

  1. 10.0
  2. 11.0
  3. 12.0
  4. 3.0
Answer and explanation

Answer: B

[OH⁻] ≈ √(Kb × c) = √(1.0 × 10⁻⁴ × 0.010) = √(1.0 × 10⁻⁶) = 1.0 × 10⁻³ M, so pOH = 3.0 and pH = 14 − 3.0 = 11.0.

Which arrangement shows increasing basic strength in water?

  1. C₆H₅NH₂ < NH₃ < C₂H₅NH₂ < (C₂H₅)₂NH
  2. NH₃ < C₆H₅NH₂ < C₂H₅NH₂ < (C₂H₅)₂NH
  3. (C₂H₅)₂NH < C₂H₅NH₂ < NH₃ < C₆H₅NH₂
  4. C₂H₅NH₂ < C₆H₅NH₂ < NH₃ < (C₂H₅)₂NH
Answer and explanation

Answer: A

pKb values: aniline 9.38, NH₃ 4.75, ethanamine 3.29, N-ethylethanamine 3.00. Smaller pKb means stronger base, so the order of increasing strength is C₆H₅NH₂ < NH₃ < C₂H₅NH₂ < (C₂H₅)₂NH.

Compound X gives ethanamine on treatment with Br₂ and NaOH (Hoffmann bromamide degradation). What is X?

  1. Ethanamide
  2. Propanamide
  3. Butanamide
  4. Propanenitrile
Answer and explanation

Answer: B

Hoffmann degradation converts an amide into a primary amine with one carbon fewer. Ethanamine has two carbons, so the amide must have three: propanamide, CH₃CH₂CONH₂. A nitrile does not undergo this reaction.

Which sequence converts 1-bromopropane into butan-1-amine?

  1. NH₃ (excess)
  2. KCN, then LiAlH₄
  3. Gabriel synthesis
  4. Br₂/NaOH
Answer and explanation

Answer: B

One carbon must be added. CH₃CH₂CH₂Br + KCN → CH₃CH₂CH₂CN, and LiAlH₄ reduces the nitrile to CH₃CH₂CH₂CH₂NH₂. Ammonolysis or Gabriel synthesis would give propan-1-amine, with no extra carbon.

Assertion (A): Primary amines boil at higher temperatures than isomeric tertiary amines. Reason (R): Tertiary amines have a higher molar mass than their primary isomers.

  1. Both A and R are true, and R is the correct explanation of A
  2. Both A and R are true, but R is not the correct explanation of A
  3. A is true, but R is false
  4. A is false, but R is true
Answer and explanation

Answer: C

A is true. R is false: isomers have the same molar mass. Primary amines boil higher because they have two N–H hydrogens for intermolecular hydrogen bonding, while tertiary amines have none.

Which order of boiling points is correct?

  1. (CH₃)₂NH < C₂H₅NH₂ < C₂H₅OH
  2. C₂H₅OH < C₂H₅NH₂ < (CH₃)₂NH
  3. C₂H₅NH₂ < (CH₃)₂NH < C₂H₅OH
  4. (CH₃)₂NH < C₂H₅OH < C₂H₅NH₂
Answer and explanation

Answer: A

All have similar molar masses. The secondary amine has one N–H, the primary two, and the alcohol forms the strongest hydrogen bonds because O is more electronegative than N.

How many of the structural isomers of C₄H₁₁N will liberate nitrogen gas with nitrous acid?

  1. 2
  2. 3
  3. 4
  4. 8
Answer and explanation

Answer: C

Only primary aliphatic amines give N₂ with HNO₂. C₄H₁₁N has eight amine isomers; the primary ones are butan-1-amine, butan-2-amine, 2-methylpropan-1-amine and 2-methylpropan-2-amine: four. The other four are secondary or tertiary.

Assertion (A): Iodobenzene is made from benzenediazonium chloride and KI rather than by direct iodination of benzene. Reason (R): Direct iodination of benzene is reversible and does not easily give a good yield, while diazonium salts react readily with KI.

  1. Both A and R are true, and R is the correct explanation of A
  2. Both A and R are true, but R is not the correct explanation of A
  3. A is true, but R is false
  4. A is false, but R is true
Answer and explanation

Answer: A

Both are true. Iodine does not easily substitute benzene directly (the reaction is reversible and needs an oxidising agent), but shaking a diazonium salt with KI gives iodobenzene smoothly. R explains A.

What is formed when benzenediazonium chloride reacts with phenol in alkaline solution?

  1. p-Hydroxyazobenzene, an orange dye
  2. Diphenyl ether
  3. Chlorobenzene and phenol
  4. Benzoic acid
Answer and explanation

Answer: A

The diazonium ion acts as an electrophile and couples at the para position of phenol, keeping the –N=N– link: C₆H₅–N=N–C₆H₄–OH, p-hydroxyazobenzene, an orange azo dye.

Which product forms when benzenediazonium chloride is treated with hypophosphorous acid (H₃PO₂)?

  1. Phenol
  2. Benzene
  3. Chlorobenzene
  4. Aniline
Answer and explanation

Answer: B

H₃PO₂ is a mild reducing agent that replaces the diazonium group by hydrogen, giving benzene, while it is itself oxidised to phosphorous acid.

Which reagent converts benzenediazonium chloride into benzonitrile?

  1. KCN alone
  2. HCN
  3. KI
  4. CuCN
Answer and explanation

Answer: D

The Sandmeyer reaction uses a copper(I) salt to introduce Cl, Br or CN. CuCN (with KCN) replaces –N₂⁺ by –CN to give C₆H₅CN.

At what temperature is benzenediazonium chloride prepared, and why?

  1. 373 K, to speed up the reaction
  2. 273–278 K, because the diazonium salt decomposes at higher temperatures
  3. 298 K, because nitrous acid is stable then
  4. 453 K, to remove water
Answer and explanation

Answer: B

Arenediazonium salts are stable only for a short time in cold solution. Above about 278 K they begin to react with water (giving phenol and N₂), so diazotisation is done in ice at 273–278 K.

Privacy · Terms · Refunds · Delivery