Chapter 3 Production and Costs
Practice questions
Assertion (A): The falling part of the LRAC curve corresponds to increasing returns to scale. Reason (R): Under IRS, a proportional increase in output needs a less than proportional increase in inputs and hence in cost.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Answer and explanation
Answer: A
Both are true. If cost rises less than proportionally with output, cost per unit falls - the downward-sloping part of LRAC. R explains A.
Why is there no fixed cost in the long run?
- Because output is zero in the long run
- Because all inputs can be varied, so no input is fixed
- Because prices are fixed
- Because firms do not pay rent in the long run
Answer and explanation
Answer: B
Fixed cost is the cost of fixed inputs. In the long run every input can be varied, so there are no fixed inputs and no fixed cost; TC and TVC coincide.
Case: A made-up firm finds that when SMC is ₹9, AVC is ₹11. Which is certainly true at this output?
- AVC is falling
- AVC is rising
- AVC is at its minimum
- SAC is below AVC
Answer and explanation
Answer: A
Marginal cost below the average pulls the average down, so AVC is falling. SAC can never be below AVC, since SAC = AVC + AFC.
In the short run, as output increases, the vertical gap between the SAC and AVC curves:
- Widens, because AFC rises
- Stays constant, because TFC is constant
- Becomes negative
- Narrows, because AFC falls
Answer and explanation
Answer: D
The gap SAC − AVC equals AFC = TFC/q, which falls as q rises. So the two curves come closer as output grows.
A firm's SMCs for the first five units are ₹20, 14, 11, 13, 18 and TFC is ₹40 (illustrative). TC at 5 units is:
- ₹76
- ₹116
- ₹56
- ₹136
Answer and explanation
Answer: B
TVC = sum of SMCs = 20 + 14 + 11 + 13 + 18 = ₹76. TC = TVC + TFC = 76 + 40 = ₹116.
Which set of figures is consistent for one firm at the same output?
- SAC ₹20, AVC ₹14, AFC ₹6
- SAC ₹20, AVC ₹24, AFC ₹4
- SAC ₹20, AVC ₹14, AFC ₹8
- SAC ₹14, AVC ₹20, AFC ₹6
Answer and explanation
Answer: A
SAC must equal AVC + AFC. Only 14 + 6 = 20 matches SAC = ₹20. The others break the identity (24 + 4 = 28, 14 + 8 = 22, 20 + 6 = 26).
TC at outputs 0, 1, 2, 3 is ₹25, 45, 60, 70 (illustrative). AVC at 3 units is:
- ₹23.33
- ₹10
- ₹15
- ₹15.67
Answer and explanation
Answer: C
TFC = TC at zero = ₹25. TVC at 3 = 70 − 25 = ₹45. AVC = 45/3 = ₹15. Check alternatives: 70/3 ≈ 23.33 is SAC, not AVC; ₹10 is SMC of the 3rd unit. So the answer is ₹15.
The cost function of a firm gives:
- The average of all possible costs of each output
- The least cost of producing each level of output at given input prices and technology
- The highest cost the firm can pay
- The price at which output is sold
Answer and explanation
Answer: B
For each output the firm chooses the cheapest input combination, so the cost function records the least cost of producing each output.
For q = L^0.3 K^0.5, if both inputs are doubled, output:
- Doubles exactly
- More than doubles
- Rises by less than double, since α + β = 0.8 < 1
- Does not change
Answer and explanation
Answer: C
Output is multiplied by 2^(α+β) = 2^0.8, which is less than 2 because α + β = 0.8 < 1: decreasing returns to scale.
All inputs are tripled and output rises from 20 to 75 units. Returns to scale are:
- Increasing, since 75 is more than 3 × 20 = 60
- Constant
- Decreasing
- Diminishing marginal product
Answer and explanation
Answer: A
Constant returns would give 3 × 20 = 60. Output of 75 exceeds 60, so output rises more than in proportion: increasing returns to scale.
The law of variable proportions arises because:
- All inputs are increased in the same proportion
- Factor proportions change as more of the variable input is added to a fixed input
- Input prices rise as output rises
- Technology improves in the short run
Answer and explanation
Answer: B
With one factor fixed, adding the other changes factor proportions: first towards a more suitable ratio (MP rises), then towards crowding (MP falls).
Using TP 12, 30, 45, 52 for 1 to 4 workers (illustrative), AP at 3 workers is:
- 15
- 45
- 13
- 18
Answer and explanation
Answer: A
AP = TP/L = 45/3 = 15 units per worker.
TP of labour is 12, 30, 45, 52 for 1 to 4 workers (illustrative). Which worker has the highest MP?
- The 1st
- The 3rd
- The 4th
- The 2nd
Answer and explanation
Answer: D
MPs: 12, 30 − 12 = 18, 45 − 30 = 15, 52 − 45 = 7. The second worker adds the most (18).
In an illustrative production table, 20 units can be made with (L = 1, K = 5), (L = 2, K = 3) and (L = 4, K = 2). The curve joining these combinations is:
- An indifference curve
- A total product curve
- An isoquant
- A cost curve
Answer and explanation
Answer: C
A curve joining input combinations that give the same maximum output is an isoquant.
Which statement about the long run is correct according to the textbook?
- It is any period longer than one year
- It is a period in which all inputs can be varied
- It is a period in which capital is fixed
- It is the same length for every production process
Answer and explanation
Answer: B
The book defines the long run as a period in which all inputs can be varied, and warns against defining it in calendar time because the length differs between processes.
Assertion (A): The minimum point of SAC lies to the right of the minimum point of AVC. Reason (R): After AVC starts rising, AFC continues to fall, so SAC keeps falling for a while.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Answer and explanation
Answer: A
Both are true. Since SAC = AVC + AFC and AFC is still falling when AVC turns up, SAC goes on falling until the rise in AVC outweighs the fall in AFC, i.e. at a larger output. R explains A.
A made-up firm's long run TC for 1, 2 and 3 units is ₹60, 100 and 126. Which phase is it in between 1 and 3 units?
- Decreasing returns to scale, since LRAC rises
- Increasing returns to scale, since LRAC falls from 60 to 50 to 42
- Constant returns to scale, since LRAC is constant
- Cannot tell without fixed cost
Answer and explanation
Answer: B
LRAC = 60/1 = 60, 100/2 = 50, 126/3 = 42. Falling LRAC corresponds to increasing returns to scale. (There are no fixed costs in the long run.)
Where does the SMC curve cut the SAC curve?
- At the maximum point of SAC, from above
- Where SAC meets the AVC curve
- At zero output
- At the minimum point of SAC, from below
Answer and explanation
Answer: D
While SAC falls, SMC is below it; while SAC rises, SMC is above it. So SMC crosses SAC from below exactly at SAC's minimum.
The SMC curve is U-shaped mainly because of:
- The law of variable proportions
- Constant returns to scale
- A fall in fixed cost
- The law of demand
Answer and explanation
Answer: A
As marginal product of the variable factor first rises and then falls, the extra input (and cost) needed for each extra unit first falls and then rises, making SMC U-shaped.
The AFC curve is:
- U-shaped
- A horizontal straight line
- A rectangular hyperbola that falls continuously
- Upward sloping
Answer and explanation
Answer: C
AFC × q always equals the constant TFC, so AFC keeps falling as output rises and its curve is a rectangular hyperbola.