Chapter 14 Semiconductor Electronics: Materials, Devices and Simple Circuits

Practice questions

A capacitor filter is added across the load of a rectifier. Which change makes the output dc steadier?

  1. Using a smaller capacitor
  2. Using a larger capacitor so that R_LC is much longer than the time between pulses
  3. Removing the load resistor
  4. Using a half-wave rather than a full-wave rectifier
Answer and explanation

Answer: B

The capacitor discharges through R_L between pulses. A larger R_LC means less discharge in that time, so the voltage stays near the peak with less ripple. A full-wave rectifier also helps, because pulses come twice as often.

In a reverse-biased diode the current is 1 μA at a reverse voltage of 10 V. Its reverse resistance is

  1. 1 × 10⁷ Ω
  2. 1 × 10⁵ Ω
  3. 10 Ω
  4. 1 × 10⁻⁵ Ω
Answer and explanation

Answer: A

R = V/I = 10/(1 × 10⁻⁶) = 1 × 10⁷ Ω, very large compared with the few ohms of forward bias.

A full-wave rectifier is supplied with 60 Hz ac. The frequency of the ripple in its output is

  1. 30 Hz
  2. 60 Hz
  3. 120 Hz
  4. 240 Hz
Answer and explanation

Answer: C

A full-wave rectifier produces one pulse in each half-cycle: two pulses per input cycle, so 2 × 60 = 120 Hz.

The current in a reverse-biased p-n junction (below breakdown) is due mainly to

  1. majority carriers diffusing across
  2. minority carriers drifting across the junction
  3. electrons from the battery passing straight through
  4. breakdown of the crystal
Answer and explanation

Answer: B

Reverse bias blocks majority-carrier diffusion. The small current that remains is the drift of minority carriers (electrons on the p-side, holes on the n-side) swept across by the junction field.

A silicon diode with barrier potential 0.7 V is forward biased by 0.4 V. The effective barrier height is

  1. 1.1 V
  2. 0.7 V
  3. 0.4 V
  4. 0.3 V
Answer and explanation

Answer: D

Forward bias reduces the barrier: V₀ − V = 0.7 − 0.4 = 0.3 V.

Why is the n-side of an unbiased p-n junction at a higher potential than the p-side?

  1. The n-side has more protons
  2. The n-side has lost electrons by diffusion, leaving positive donor ions
  3. Holes collect on the n-side
  4. The battery charges it
Answer and explanation

Answer: B

Electrons diffuse from the n-side to the p-side, leaving behind fixed positive donor ions. The n-side becomes positive relative to the p-side, creating the barrier potential.

Assertion (A): The donor energy level in n-type silicon lies just below the bottom of the conduction band. Reason (R): Only about 0.05 eV is needed to free the extra electron of a pentavalent atom in silicon.

  1. Both A and R are true, and R is the correct explanation of A
  2. Both A and R are true, but R is not the correct explanation of A
  3. A is true, but R is false
  4. A is false, but R is true
Answer and explanation

Answer: A

Both are true. Because the fifth electron is so weakly bound, its level E_D sits just below E_C, and a tiny energy lifts it into the conduction band. R explains A.

Silicon (nᵢ = 1.5 × 10¹⁶ m⁻³) is doped with acceptors so that nₕ = 3 × 10²² m⁻³. The electron concentration is

  1. 7.5 × 10⁹ m⁻³
  2. 1.5 × 10¹⁶ m⁻³
  3. 2 × 10⁶ m⁻³
  4. 4.5 × 10³⁸ m⁻³
Answer and explanation

Answer: A

nₑ = nᵢ²/nₕ = (2.25 × 10³²)/(3 × 10²²) = 7.5 × 10⁹ m⁻³.

Silicon is doped with indium. The resulting semiconductor

  1. is n-type with electrons as majority carriers
  2. is p-type with holes as majority carriers
  3. is intrinsic
  4. carries a net negative charge
Answer and explanation

Answer: B

Indium is trivalent, an acceptor. It creates holes, so the material is p-type with holes as majority carriers. It stays electrically neutral overall.

As the temperature of an intrinsic semiconductor rises, its resistivity

  1. rises steadily
  2. stays constant
  3. falls
  4. first rises then becomes infinite
Answer and explanation

Answer: C

More thermal energy breaks more covalent bonds, creating more electron-hole pairs. More carriers mean higher conductivity, i.e. lower resistivity.

The motion of a hole in a semiconductor is really

  1. the motion of a positive ion through the lattice
  2. the motion of a free electron in the conduction band
  3. bound electrons moving from bond to bond to fill vacancies
  4. the motion of protons
Answer and explanation

Answer: C

A hole is a missing electron in a bond. When a neighbouring bound electron fills it, the vacancy shifts. The hole's motion is a convenient description of these bound-electron jumps.

In pure silicon at room temperature, nᵢ = 1.5 × 10¹⁶ m⁻³ and there are 5 × 10²⁸ atoms m⁻³. The fraction of atoms that have contributed a free electron is about

  1. 3 × 10⁻¹³
  2. 3 × 10¹²
  3. 1.5 × 10⁻⁶
  4. 1
Answer and explanation

Answer: A

Fraction = nᵢ / atom density = 1.5 × 10¹⁶ / 5 × 10²⁸ = 3 × 10⁻¹³. Pure silicon has very few carriers.

Assertion (A): Tin belongs to the same group as carbon, silicon and germanium, but it is a metal. Reason (R): The band gap of tin is zero.

  1. Both A and R are true, and R is the correct explanation of A
  2. Both A and R are true, but R is not the correct explanation of A
  3. A is true, but R is false
  4. A is false, but R is true
Answer and explanation

Answer: A

Both are true. With no gap between its valence and conduction bands, tin has plenty of free electrons and conducts like a metal. R explains A.

The longest wavelength of light that can free an electron across the band gap of silicon (1.1 eV) is about (hc ≈ 1240 eV nm)

  1. 1130 nm
  2. 565 nm
  3. 113 nm
  4. 2260 nm
Answer and explanation

Answer: A

λ_max = hc/E_g = 1240/1.1 ≈ 1130 nm, in the infrared. Shorter wavelengths have enough energy per photon.

A solid has resistivity of about 10⁻⁷ Ω m. It is most likely

  1. an insulator
  2. a semiconductor
  3. a metal
  4. a vacuum
Answer and explanation

Answer: C

Metals have resistivities of about 10⁻² to 10⁻⁸ Ω m; 10⁻⁷ Ω m falls in this range. Semiconductors and insulators have much higher resistivity.

Assertion (A): A full-wave rectifier with a centre-tap transformer gives output in both half-cycles of the input. Reason (R): In each half-cycle one diode is forward biased while the other is reverse biased, and both send current the same way through the load.

  1. Both A and R are true, and R is the correct explanation of A
  2. Both A and R are true, but R is not the correct explanation of A
  3. A is true, but R is false
  4. A is false, but R is true
Answer and explanation

Answer: A

Both are true. The two ends of the secondary are in opposite phase, so D₁ conducts in one half-cycle and D₂ in the other, each driving current in the same direction through R_L. R explains A.

In a capacitor filter, the output voltage is smoother when

  1. the capacitance is small
  2. the load resistance is very small
  3. the product R_LC is large
  4. the capacitor is in series with the load
Answer and explanation

Answer: C

A large time constant R_LC means the capacitor discharges only slightly between pulses, so the output stays close to the peak with little ripple. The capacitor goes in parallel with the load.

A rectifier works from 50 Hz mains, and its unfiltered output shows 100 pulses every second. The rectifier is

  1. a half-wave rectifier with one diode
  2. not rectifying at all
  3. a half-wave rectifier with a capacitor filter
  4. a full-wave rectifier
Answer and explanation

Answer: D

A half-wave rectifier gives one pulse per input cycle (50 per second). Getting 100 pulses per second means a pulse in every half-cycle, which is full-wave rectification.

On a diode's forward characteristic, the current rises from 10 mA to 30 mA when the voltage rises from 0.72 V to 0.82 V. The dynamic resistance is

  1. 5 Ω
  2. 2.7 Ω
  3. 27 Ω
  4. 50 Ω
Answer and explanation

Answer: A

r_d = ΔV/ΔI = (0.82 − 0.72)/(30 − 10) × 10⁻³ = 0.10/0.020 = 5 Ω.

The threshold (cut-in) voltage of a silicon diode is about

  1. 0.2 V
  2. 1.1 V
  3. 0.7 V
  4. 5 V
Answer and explanation

Answer: C

A silicon diode conducts appreciably only above about 0.7 V; germanium needs only about 0.2 V.

Privacy · Terms · Refunds · Delivery