Chapter 6 Electromagnetic Induction

Practice questions

In an ac generator, the role of the slip rings and brushes is to

  1. make the current flow in one direction only
  2. connect the rotating coil to the external circuit
  3. increase the magnetic field
  4. reduce the speed of rotation
Answer and explanation

Answer: B

The slip rings turn with the coil and the fixed brushes rub on them, carrying the alternating current from the rotating coil to the external circuit without twisting the wires. They do not rectify it.

The peak emf of a generator is 100 V at 50 Hz, with ε = 0 at t = 0. What is the emf at t = 2.5 ms?

  1. 100 V
  2. 50 V
  3. 70.7 V
  4. Zero
Answer and explanation

Answer: C

ε = ε₀ sin 2πνt = 100 sin (2π × 50 × 0.0025) = 100 sin (π/4) = 100 × 0.707 ≈ 70.7 V.

A generator coil of 200 turns and area 0.025 m² rotates at 3000 revolutions per minute in a field of 0.04 T. What is its peak emf?

  1. 62.8 V
  2. 31.4 V
  3. 6.28 V
  4. 2.0 V
Answer and explanation

Answer: A

ν = 3000 ÷ 60 = 50 Hz, ω = 2π × 50 ≈ 314 rad s⁻¹. ε₀ = NBAω = 200 × 0.04 × 0.025 × 314 = 0.2 × 314 ≈ 62.8 V.

A small coil of radius 1 cm and a large coil of radius 50 cm are coaxial and concentric. What is their mutual inductance? (each has one turn)

  1. 2.5 × 10⁻⁷ H
  2. 1.6 × 10⁻⁹ H
  3. 4 × 10⁻⁹ H
  4. 3.9 × 10⁻¹⁰ H
Answer and explanation

Answer: D

M = μ₀πr₁²/(2r₂) = 4π × 10⁻⁷ × π × (0.01)² ÷ (2 × 0.5) = 4π² × 10⁻¹¹ ≈ 3.9 × 10⁻¹⁰ H.

A solenoid has self-inductance L. A soft iron core of relative permeability 500 is inserted to fill it. Its self-inductance becomes

  1. L/500
  2. L
  3. 500L
  4. 250 000L
Answer and explanation

Answer: C

L = μrμ₀n²Al is directly proportional to μr, so filling the solenoid with μr = 500 gives 500L.

A current through a coil falls from 3 A to zero in 0.05 s, inducing an average emf of 12 V. How much energy was stored in the coil at 3 A?

  1. 0.9 J
  2. 1.8 J
  3. 0.6 J
  4. 0.45 J
Answer and explanation

Answer: A

L = εΔt/ΔI = 12 × 0.05 ÷ 3 = 0.2 H. Energy = ½LI² = ½ × 0.2 × 9 = 0.9 J.

Assertion (A): An emf is induced in a stationary loop placed in a changing magnetic field. Reason (R): The Lorentz force qv × B acts on the charges of the stationary loop.

  1. Both A and R are true, and R is the correct explanation of A
  2. Both A and R are true, but R is not the correct explanation of A
  3. A is true, but R is false
  4. A is false, but R is true
Answer and explanation

Answer: C

A is true (Faraday's experiments). R is false: for stationary charges v = 0, so qv × B = 0. The emf arises because the changing magnetic field produces an electric field, which pushes the charges.

A conducting rod of length 0.4 m slides at 3 m s⁻¹ on rails in a perpendicular field of 0.5 T; the circuit resistance is 1.2 Ω. What force is needed to keep it moving at constant speed?

  1. 0.6 N
  2. 0.2 N
  3. 0.1 N
  4. 0.06 N
Answer and explanation

Answer: C

ε = Blv = 0.5 × 0.4 × 3 = 0.6 V. I = 0.6 ÷ 1.2 = 0.5 A. Opposing force F = BIl = 0.5 × 0.5 × 0.4 = 0.1 N; an equal pull keeps the speed constant.

A rod rotates about one end with angular speed ω in a uniform field B perpendicular to its plane of rotation. If its length is doubled, the emf between its ends becomes

  1. 2 times
  2. unchanged
  3. 4 times
  4. half
Answer and explanation

Answer: C

ε = ½BωR², so ε ∝ R². Doubling R multiplies the emf by 2² = 4.

A rectangular loop of sides 12 cm and 3 cm, with a small cut, moves out of a uniform field of 0.5 T (normal to the loop) at 2 cm s⁻¹, its velocity perpendicular to its shorter side. What emf appears across the cut, and for how long?

  1. 1.2 mV for 1.5 s
  2. 0.3 mV for 6 s
  3. 0.3 mV for 1.5 s
  4. 1.2 mV for 6 s
Answer and explanation

Answer: B

With the velocity perpendicular to the shorter side, the 3 cm side is the edge crossing the field boundary: ε = Blv = 0.5 × 0.03 × 0.02 = 3 × 10⁻⁴ V = 0.3 mV. The loop must travel its 12 cm length to get out: 12 ÷ 2 = 6 s.

Assertion (A): When a magnet is pushed into a closed coil, the person pushing must do work. Reason (R): The induced current makes the coil repel the approaching magnet.

  1. Both A and R are true, and R is the correct explanation of A
  2. Both A and R are true, but R is not the correct explanation of A
  3. A is true, but R is false
  4. A is false, but R is true
Answer and explanation

Answer: A

Both are true. By Lenz's law the induced current makes the near face of the coil a like pole, repelling the magnet, so work is needed; it appears as heat in the coil. R explains A.

A bar magnet is dropped, north pole downward, through a horizontal copper ring. Looking down from above, the induced current in the ring as the magnet approaches is

  1. clockwise
  2. anticlockwise
  3. zero
  4. first clockwise, then anticlockwise before it reaches the ring
Answer and explanation

Answer: B

As the north pole approaches from above, the downward flux through the ring grows. The ring opposes this by making an upward field, i.e. a north pole on its upper face, which requires an anticlockwise current as seen from above.

Which change does NOT induce an emf in a flat coil placed in a uniform magnetic field?

  1. Rotating the coil about an axis perpendicular to the field
  2. Changing the strength of the field
  3. Shrinking the coil
  4. Sliding the coil sideways while it stays wholly inside the uniform field
Answer and explanation

Answer: D

Sliding the coil within a uniform field leaves B, A and θ unchanged, so the flux is constant and no emf is induced. Each of the other changes alters the flux.

The flux through a coil varies as Φ = (3t² + 2t) × 10⁻³ Wb (t in seconds). What emf is induced at t = 2 s?

  1. 16 mV
  2. 14 mV
  3. 12 mV
  4. 8 mV
Answer and explanation

Answer: B

ε = dΦ/dt = (6t + 2) × 10⁻³. At t = 2 s: (12 + 2) × 10⁻³ = 14 × 10⁻³ V = 14 mV.

A square loop of side 20 cm and resistance 0.4 Ω is in a field of 0.2 T making 60° with its normal. The field drops steadily to zero in 0.5 s. What current is induced?

  1. 10 mA
  2. 20 mA
  3. 40 mA
  4. 8 mA
Answer and explanation

Answer: B

Φ = BA cos 60° = 0.2 × 0.04 × 0.5 = 4 × 10⁻³ Wb. ε = Φ/Δt = 4 × 10⁻³ ÷ 0.5 = 8 × 10⁻³ V. I = ε/R = 8 × 10⁻³ ÷ 0.4 = 0.02 A = 20 mA.

Assertion (A): The emf of a rotating generator coil is zero at the instant when the flux through it is maximum. Reason (R): The induced emf depends on the rate of change of flux, which is zero when the flux is at its maximum.

  1. Both A and R are true, and R is the correct explanation of A
  2. Both A and R are true, but R is not the correct explanation of A
  3. A is true, but R is false
  4. A is false, but R is true
Answer and explanation

Answer: A

Both are true. Φ = BA cos ωt is maximum when sin ωt = 0, and at that instant dΦ/dt = −BAω sin ωt = 0, so the emf is zero. R explains A.

A generator's emf is ε = 200 sin 100πt volts. What is the frequency of the ac it produces?

  1. 100 Hz
  2. 50 Hz
  3. 200 Hz
  4. 314 Hz
Answer and explanation

Answer: B

Comparing with ε₀ sin 2πνt: 2πν = 100π, so ν = 50 Hz.

If the speed of rotation of a generator coil is doubled, keeping everything else the same, the peak emf and frequency become

  1. the same emf, double frequency
  2. double emf, same frequency
  3. half emf, double frequency
  4. double emf, double frequency
Answer and explanation

Answer: D

ε₀ = NBAω is proportional to ω, and the frequency is ω/2π, so both double.

A coil of 60 turns and area 0.2 m² rotates at 0.5 revolutions per second in a field of 0.02 T. What is the peak emf?

  1. 0.754 V
  2. 0.12 V
  3. 7.54 V
  4. 0.0754 V
Answer and explanation

Answer: A

ε₀ = NBA × 2πν = 60 × 0.02 × 0.2 × 2π × 0.5 = 0.24 × 3.14 ≈ 0.754 V.

In an ac generator, the emf is maximum when the plane of the coil is

  1. perpendicular to the magnetic field
  2. at 45° to the field
  3. parallel to the magnetic field
  4. moving along the field
Answer and explanation

Answer: C

When the coil's plane lies along the field (θ = 90° between B and the area vector), the flux is zero but changing fastest, so ε = NBAω sin 90° is maximum.

Privacy · Terms · Refunds · Delivery