Chapter 9 Ray Optics and Optical Instruments
Practice questions
Which change improves the resolving power of an astronomical telescope?
- Using an eyepiece of shorter focal length
- Using a longer tube
- Using an objective of larger diameter
- Adding inverting lenses
Answer and explanation
Answer: C
The ability to separate two objects in nearly the same direction depends on the diameter of the objective; a wider objective resolves finer detail and also gathers more light. A shorter eyepiece only raises magnification, not the detail available.
A telescope in normal adjustment has magnifying power 20 and tube length 105 cm. The focal length of its objective is
- 5 cm
- 100 cm
- 84 cm
- 21 cm
Answer and explanation
Answer: B
fₒ/fₑ = 20 and fₒ + fₑ = 105 cm. So 20fₑ + fₑ = 105, fₑ = 5 cm and fₒ = 20 × 5 = 100 cm.
A compound microscope has an objective of focal length 2 cm, an eyepiece of focal length 5 cm and a tube length of 16 cm. With the final image at infinity, its magnifying power is
- 40
- 8
- 80
- 32
Answer and explanation
Answer: A
mₒ = L/fₒ = 16/2 = 8 and mₑ = D/fₑ = 25/5 = 5, so m = 8 × 5 = 40.
Assertion (A): The deviation produced by a thin prism does not depend on the refractive index of its material. Reason (R): For a thin prism the deviation is δ = (n − 1)A.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Answer and explanation
Answer: D
R is true and it shows that A is false: δ = (n − 1)A depends directly on n. For example, with A = 4°, a prism of n = 1.5 deviates by 2°, but one of n = 1.6 deviates by 2.4°.
A prism of angle 60° and refractive index √2 is set for minimum deviation. The angle of incidence is
- 30°
- 60°
- 45°
- 90°
Answer and explanation
Answer: C
sin[(A + Dₘ)/2] = n sin(A/2) = √2 × 0.5 = 0.7071, so (A + Dₘ)/2 = 45°, giving Dₘ = 30°. At minimum deviation i = (A + Dₘ)/2 = 45°.
A convex lens of focal length 20 cm is in contact with a concave lens of focal length 30 cm. The power of the combination is about
- +1.67 D
- −1.67 D
- +8.33 D
- +60 D
Answer and explanation
Answer: A
1/f = 1/20 − 1/30 = (3 − 2)/60 = 1/60 cm⁻¹, so f = +60 cm = 0.6 m. P = 1/0.6 ≈ +1.67 D, a weakly converging combination.
A convex lens made of glass (n = 1.5) is placed in a liquid of refractive index 1.6. In the liquid the lens
- converges light more strongly than in air
- behaves as a diverging lens
- has no effect on light
- converges light exactly as in air
Answer and explanation
Answer: B
n₂₁ = 1.5/1.6 ≈ 0.94, so (n₂₁ − 1) is negative. In 1/f = (n₂₁ − 1)(1/R₁ − 1/R₂) the bracket for a convex lens is positive, so f becomes negative: the lens diverges light.
A convex lens of focal length 20 cm forms a real image of the same size as the object. The distance between the object and the image is
- 40 cm
- 20 cm
- 80 cm
- 60 cm
Answer and explanation
Answer: C
m = v/u = −1 means v = −u. Then 1/v − 1/u = 2/v = 1/20, so v = 40 cm and u = −40 cm (object at 2F). Object-to-image distance = 40 + 40 = 80 cm.
A double concave lens (n = 1.5) has both radii of curvature equal to 20 cm. Its focal length in air is
- +20 cm
- −10 cm
- +40 cm
- −20 cm
Answer and explanation
Answer: D
For a double concave lens R₁ = −20 cm and R₂ = +20 cm. 1/f = (1.5 − 1)(−1/20 − 1/20) = 0.5 × (−0.1) = −0.05 cm⁻¹, so f = −20 cm (diverging).
A small lamp sits 0.8 m deep in a transparent liquid of refractive index 5/3 (a made-up value chosen for easy numbers). Light leaves the surface only through a circle. Its radius is
- 0.8 m
- 0.6 m
- 0.48 m
- 1.07 m
Answer and explanation
Answer: B
Rays escape only where i < iᶜ. sin iᶜ = 1/n = 3/5, so cos iᶜ = 4/5 and tan iᶜ = 3/4. Radius r = depth × tan iᶜ = 0.8 × 0.75 = 0.6 m.
The refractive index of diamond is 2.42. Taking c = 3 × 10⁸ m s⁻¹, the speed of light in diamond is about
- 7.3 × 10⁸ m s⁻¹
- 2.42 × 10⁸ m s⁻¹
- 1.24 × 10⁸ m s⁻¹
- 0.81 × 10⁸ m s⁻¹
Answer and explanation
Answer: C
n = c/v, so v = c/n = (3 × 10⁸)/2.42 ≈ 1.24 × 10⁸ m s⁻¹. Light is slower in an optically denser medium.
Light in glass (n = 1.5) meets a glass–water boundary (n = 4/3) at an angle of incidence of 65°. What happens?
- It refracts into the water, bending towards the normal
- It refracts into the water, bending away from the normal
- It is totally reflected, because 65° exceeds the critical angle of about 62.7°
- It passes straight through without bending
Answer and explanation
Answer: C
sin iᶜ = n(water)/n(glass) = (4/3)/1.5 = 0.889, so iᶜ ≈ 62.7°. Since 65° is larger and the light travels from denser to rarer, no refraction is possible: total internal reflection occurs.
Assertion (A): If the lower half of a concave mirror is covered with black paper, the image still shows the whole object, but it is less bright. Reason (R): Every part of the mirror receives rays from every point of the object and can form a complete image.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Answer and explanation
Answer: A
Both are true. The uncovered half still reflects rays from every point of the object to the corresponding image points, so the whole image forms. Fewer rays reach it, so it is dimmer. R is the reason for A.
A convex mirror has a focal length of 20 cm. For any real object, its image lies
- between the pole and 20 cm behind the mirror
- beyond 40 cm behind the mirror
- between 20 cm and 40 cm in front of the mirror
- at infinity
Answer and explanation
Answer: A
For a convex mirror f = +20 cm and u < 0, so 1/v = 1/20 + 1/|u| is greater than 1/20. Hence v is positive and less than 20 cm: the virtual image is always between the pole and the focus behind the mirror.
An object is 10 cm in front of a concave mirror of focal length 15 cm. The image is
- 30 cm in front of the mirror, real and inverted
- 6 cm behind the mirror, virtual and diminished
- 30 cm behind the mirror, virtual, erect and three times enlarged
- 15 cm in front of the mirror, real and same size
Answer and explanation
Answer: C
u = −10 cm, f = −15 cm. 1/v = 1/f − 1/u = −1/15 + 1/10 = (−2 + 3)/30 = 1/30, so v = +30 cm (behind the mirror, virtual). m = −v/u = −30/(−10) = +3: erect and three times enlarged.
Assertion (A): Most large modern astronomical telescopes use a concave mirror as the objective. Reason (R): A lens objective of the same size would be lighter than a mirror and easier to support.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Answer and explanation
Answer: C
A is true. R is false: a large lens is heavier than a mirror of the same optical quality and can be held only at its rim, while a mirror can be supported over its whole back. Mirrors also have no chromatic aberration.
Why is the objective of an astronomical telescope made with a large diameter?
- To make the final image erect
- To reduce the length of the tube
- To increase the magnifying power fₒ/fₑ
- To gather more light and resolve objects that are very close together
Answer and explanation
Answer: D
Light-gathering power grows with the area of the objective, so fainter objects become visible, and resolving power also improves with a wider objective. The magnifying power depends on the focal lengths, not the diameter.
A compound microscope has fₒ = 0.5 cm, fₑ = 2.5 cm and tube length 10 cm. With the final image at infinity, its magnifying power is about
- 200
- 50
- 100
- 500
Answer and explanation
Answer: A
mₒ = L/fₒ = 10/0.5 = 20 and mₑ = D/fₑ = 25/2.5 = 10, so m = 20 × 10 = 200.
A telescope has an objective of focal length 100 cm and an eyepiece of focal length 4 cm. In normal adjustment, the distance between the lenses is
- 96 cm
- 25 cm
- 104 cm
- 400 cm
Answer and explanation
Answer: C
In normal adjustment the first image is at the second focus of the objective and the first focus of the eyepiece, so the separation is fₒ + fₑ = 100 + 4 = 104 cm. (Its magnifying power is 100/4 = 25.)
A magnifying glass of focal length 2.5 cm forms the final image at the near point (25 cm). Its magnifying power is
- 10
- 11
- 9
- 12.5
Answer and explanation
Answer: B
m = 1 + D/f = 1 + 25/2.5 = 1 + 10 = 11.