Chapter 3 Electricity: Circuits and their Components

Practice questions

Why should switches never be touched with wet hands?

  1. Water makes the switch an insulator
  2. Wet hands make the bulb fuse
  3. Water and the human body conduct electricity, so a shock is more likely
  4. It is only a matter of keeping switches clean
Answer and explanation

Answer: C

Our body conducts electricity and impure water helps current pass, so wet hands increase the risk of a dangerous shock.

A drawer has four torch cells, and some are used up. Which plan finds the working ones fairly?

  1. Connect all four together and see if a lamp glows
  2. Look at the colour of each cell
  3. Use a different lamp and wire for each cell
  4. Put each cell in turn into the same circuit with the same working lamp and see whether the lamp glows
Answer and explanation

Answer: D

Testing each cell alone in the same circuit, with a lamp known to work, changes only the cell. If the lamp glows, that cell is working.

Why are the pins of a plug made of metal while the plug top is made of plastic?

  1. The pins must conduct current; the top must insulate the user's hand
  2. Metal is cheaper than plastic
  3. Plastic conducts better than metal
  4. The pins must stop current from flowing
Answer and explanation

Answer: A

The pins carry current into the appliance, so they must be conductors. The top is held by hand, so it must be an insulator.

Which list contains ONLY conductors?

  1. Copper wire, rubber band, iron nail
  2. Copper wire, iron nail, aluminium foil
  3. Glass, plastic, wood
  4. Aluminium foil, wax, steel spoon
Answer and explanation

Answer: B

Copper, iron and aluminium are metals and conduct electricity. Rubber, glass, plastic, wood and wax are insulators.

In a cell symbol, which line is the negative terminal?

  1. The shorter, thicker line
  2. The longer, thinner line
  3. The line through the middle of the circle
  4. The arrow pointing outwards
Answer and explanation

Answer: A

The long line stands for the positive terminal and the short line for the negative terminal.

In a circuit diagram, an LED symbol's triangle points from the − side of the battery towards the + side. The switch is closed. What happens?

  1. The LED glows brightly
  2. The battery stops working permanently
  3. The LED does not glow, because it is connected in the reverse direction
  4. The switch opens by itself
Answer and explanation

Answer: C

Current flows from + to − in the outside circuit. The triangle must point in that direction; pointing the other way, the LED blocks the current.

What is the job of a switch in a circuit?

  1. To produce electricity
  2. To complete or break the circuit as needed
  3. To store electricity
  4. To make the lamp shine brighter
Answer and explanation

Answer: B

A switch closes the gap (ON) or opens it (OFF); the cell is the source of electricity.

A circuit is complete, but a student moves the switch from next to the cell to the other side of the lamp. The switch is ON. Does the lamp glow?

  1. No, because a switch must always be next to the cell
  2. No, because current flows only from the switch
  3. Only if the lamp is an LED
  4. Yes, because a switch can be placed anywhere in the circuit
Answer and explanation

Answer: D

A switch simply closes or opens the path. In a simple loop, its position does not matter; when ON the circuit is complete.

A torch-style loop has a cell, a lamp, a second lamp, and two switches marked M and N. M is ON and N is OFF. Which lamps glow?

  1. Only the first lamp
  2. Only the second lamp
  3. Both lamps
  4. Neither lamp
Answer and explanation

Answer: D

There is only one path, and switch N being OFF breaks it. No current flows anywhere in the loop.

Which change would make a reversed LED glow in a circuit?

  1. Adding a plastic strip between the wires
  2. Swapping the two wires connected to the LED
  3. Opening the switch
  4. Removing the battery
Answer and explanation

Answer: B

Swapping the wires puts the longer leg on the positive side, allowing current through the LED in its one allowed direction.

Which statement correctly compares an LED and an incandescent lamp?

  1. Both have filaments and work either way
  2. An LED has a filament; an incandescent lamp does not
  3. An LED has no filament and works only one way round; an incandescent lamp has a filament and works either way
  4. Both work only one way round
Answer and explanation

Answer: C

An LED has no filament and conducts in one direction only. An incandescent lamp's filament glows whichever way the current flows through it.

An incandescent lamp is connected correctly to a working cell but does not glow. What is the most likely cause?

  1. The filament is broken
  2. The lamp is connected the wrong way round
  3. The cell has too much energy
  4. The glass is clean
Answer and explanation

Answer: A

An incandescent lamp works whichever way it is connected. If it does not glow in a correct circuit, it is probably fused, with a broken filament.

Which of these is used for experiments with electricity at school?

  1. A plug in a wall socket
  2. A battery of torch cells
  3. An extension board
  4. A portable generator
Answer and explanation

Answer: B

Only cells and batteries are safe for experiments. Mains supply and generators can cause serious injury.

The label on a torch cell has peeled off. How can you tell which end is the positive terminal?

  1. The flat metal disc is always positive
  2. Touch both ends with wet fingers
  3. Plug the cell into a wall socket
  4. The end with the small metal cap that sticks out is positive
Answer and explanation

Answer: D

On a common torch cell the protruding metal cap is the positive terminal and the flat disc is negative. Wet fingers and wall sockets are never safe ways to test.

A torch has three cells. For it to work, how must they be placed?

  1. The positive terminal of each cell touching the negative terminal of the next
  2. All metal caps facing the same flat disc of the switch
  3. Two cells + to −, and the third reversed
  4. Negative terminals touching each other
Answer and explanation

Answer: A

Cells in a battery are joined + to − throughout. Reversing any one cell makes it oppose the others.

Electricity from cells and batteries is of which type?

  1. Alternating current (AC)
  2. No current at all
  3. Direct current (DC)
  4. Static only
Answer and explanation

Answer: C

Cells and batteries supply direct current (DC). The supply from power stations to wall sockets is alternating current (AC).

A lamp in a working circuit goes off when a rubber band is slipped between a wire and the cell terminal. Why?

  1. Rubber is a conductor and uses up the current
  2. The rubber band makes the cell stronger
  3. Rubber is an insulator, so the path for current is broken
  4. The lamp fuses because of the rubber
Answer and explanation

Answer: C

Rubber does not let current pass, so placing it between the wire and the terminal opens the circuit and the lamp goes off.

Why are electric wires covered with plastic or rubber?

  1. Plastic and rubber are insulators that protect people from electric shocks
  2. Plastic and rubber make current flow faster
  3. Plastic is a better conductor than copper
  4. The cover makes the lamp brighter
Answer and explanation

Answer: A

The insulating cover stops current from passing into a person who touches the wire.

Why is copper commonly used for electric wires instead of silver?

  1. Copper does not conduct electricity
  2. Silver is an insulator
  3. Copper is lighter than plastic
  4. Copper conducts very well and costs less and is more easily available
Answer and explanation

Answer: D

Silver, copper and gold are the best conductors, but copper is chosen because it is cheaper and plentiful.

Which object will make the lamp of a conduction tester glow?

  1. A plastic scale
  2. An iron key
  3. A rubber eraser
  4. A wax candle
Answer and explanation

Answer: B

Iron is a metal and metals conduct electricity. Plastic, rubber and wax are insulators.

Privacy · Terms · Refunds · Delivery