CBSE Class 8 Science
Practice questions
Why do fish survive under a frozen lake in winter?
- Ice sinks and warms the water at the surface.
- Fish can breathe ice.
- Ice is less dense and floats, forming a top layer while the water below stays liquid.
- Lakes never freeze at all.
Answer and explanation
Answer: C
Water expands on freezing, so ice floats as a layer on top, insulating the liquid water beneath where fish live.
An unpeeled orange floats in water but the same orange peeled sinks. What is the best explanation?
- Peeling adds mass to the orange.
- The peel is denser than iron.
- The peel has many air pockets that lower the orange's overall density below water's.
- Water becomes denser when an orange is peeled.
Answer and explanation
Answer: C
The spongy peel traps air, so the whole unpeeled orange is less dense than water and floats. Without it, the fruit is denser than water and sinks.
Water in a narrow glass tube fitted into a stoppered test tube rises when the test tube is placed in hot water. What happens to the water's density?
- It decreases, because the same mass now occupies a larger volume.
- It increases, because the water gains mass.
- It stays the same, because density never changes.
- It becomes zero.
Answer and explanation
Answer: A
Heating makes the water expand (its level rises in the tube) while its mass stays the same, so density = mass ÷ volume decreases.
A bottle holds 2 litres. 500 mL of water is poured in. How much more water can it hold?
- 1500 mL
- 1500 L
- 2500 mL
- 498 mL
Answer and explanation
Answer: A
2 L = 2000 mL. Remaining space = 2000 − 500 = 1500 mL (1.5 L).
Water stands at 35 mL; a stone of mass 40 g raises it to 51 mL. What is the stone's density?
- 0.4 g/cm³
- 2.5 g/cm³
- 16 g/cm³
- 1.14 g/cm³
Answer and explanation
Answer: B
Volume = 51 − 35 = 16 cm³. Density = 40 ÷ 16 = 2.5 g/cm³. Check: 2.5 × 16 = 40.
To measure 70 mL of water most accurately in one step, which cylinder is best?
- A 100 mL cylinder
- A 50 mL cylinder
- A 500 mL cylinder
- A 10 mL cylinder
Answer and explanation
Answer: A
A 50 mL or 10 mL cylinder needs several fillings; a 500 mL one has larger divisions, so it is less accurate. A 100 mL cylinder does it in one step with small divisions.
A 1 litre bottle of oil has a mass of 900 g of oil. Which conclusion is correct?
- The oil's density is 9 g/mL, so it sinks.
- The oil's density is 900 g/mL.
- The oil's density equals water's.
- The oil's density is 0.9 g/mL, so it floats on water.
Answer and explanation
Answer: D
1 L = 1000 mL. Density = 900 ÷ 1000 = 0.9 g/mL, less than water's 1 g/mL, so the oil floats.
A substance has a density of 1.6 g/cm³. What is its relative density with respect to water?
- 1.6 g/cm³
- 1.6, with no unit
- 0.6
- 16
Answer and explanation
Answer: B
Relative density = 1.6 g/cm³ ÷ 1 g/cm³ = 1.6. The units cancel, so it has no unit.
A block of iron has a mass of 600 g and a density of 7.5 g/cm³. What is its volume?
- 4500 cm³
- 80 cm³
- 607.5 cm³
- 0.0125 cm³
Answer and explanation
Answer: B
Volume = mass ÷ density = 600 ÷ 7.5 = 80 cm³. Check: 7.5 × 80 = 600.
Which statement about temperature and solubility in water is correct?
- Gases dissolve more at higher temperatures.
- Most solids dissolve more at higher temperatures, but gases dissolve less.
- Temperature never affects solubility.
- Solids always dissolve less in hot water.
Answer and explanation
Answer: B
For most solids solubility rises with temperature; for gases such as oxygen it falls, which is why warm water holds less oxygen.
Which solution is more concentrated: 2 spoons of salt in 100 mL, or 4 spoons in 50 mL?
- 2 spoons in 100 mL
- Both are the same
- 4 spoons in 50 mL
- It cannot be compared
Answer and explanation
Answer: C
Per 100 mL, the second has 8 spoons (4 × 2) against 2 spoons in the first. So 4 spoons in 50 mL is four times as concentrated.
Which statement about saturated solutions is correct?
- It can still dissolve more solute at that temperature.
- It forms only at very high temperatures.
- It has less solute than an unsaturated solution of the same substance at the same temperature.
- No more solute can dissolve in it at that temperature.
Answer and explanation
Answer: D
A saturated solution holds the maximum solute possible at that temperature. Heating often lets it dissolve more.
In a mixture of 60 mL of water and 40 mL of alcohol, which is the solute?
- The water, because it is present in the larger amount
- Both are solvents
- The alcohol, because it is present in the smaller amount
- Neither; liquids cannot form solutions
Answer and explanation
Answer: C
In a liquid-liquid solution, the component in the smaller amount is the solute (alcohol, 40 mL); the larger amount (water, 60 mL) is the solvent.
Seawater, sawdust in water and vinegar: which are solutions?
- Sawdust in water only
- All three
- None of them
- Seawater and vinegar only
Answer and explanation
Answer: D
Seawater (salt in water) and vinegar (acetic acid in water) are uniform. Sawdust floats as visible bits, so it is a non-uniform mixture.
Which statement is correct?
- A mixture of gases such as air is uniform and can be thought of as a solution.
- A mixture of sand and water is a solution.
- In sugar syrup, sugar is the solvent because there is more of it.
- A solution always has visible particles.
Answer and explanation
Answer: A
Air's gases are evenly mixed, so it is uniform. Sand in water is non-uniform; in a solid-liquid solution the liquid is always the solvent; and a solution's particles cannot be seen.
A 90 g lump of clay with a volume of 45 cm³ is rolled into a long thin rope. What is the density of the rope?
- 2 g/cm³, the same as before
- 4 g/cm³
- 1 g/cm³
- 0.5 g/cm³
Answer and explanation
Answer: A
Density = 90 ÷ 45 = 2 g/cm³. Changing shape does not change mass or volume, so the density stays 2 g/cm³.
A raw egg sinks in tap water. What change would make it float?
- Add more tap water.
- Cool the egg in a refrigerator.
- Use a taller glass.
- Dissolve a lot of salt in the water.
Answer and explanation
Answer: D
Salt raises the density of the water. When the salt water is denser than the egg, the egg floats.
Why does ice float on water?
- Ice is denser than water.
- Ice contains air bubbles only because of dust.
- Water expands on freezing, so ice is less dense than liquid water.
- Ice is a different substance from water.
Answer and explanation
Answer: C
Freezing water arranges its particles to take up more space; ice has the same mass in a larger volume, so it is less dense and floats.
On which state of matter does pressure have the greatest effect on density?
- Solid
- Gas
- Liquid
- It affects all equally
Answer and explanation
Answer: B
Gas particles are far apart, so pressure can push them much closer, increasing density a lot. Liquids and solids hardly compress.
Why does heating usually decrease the density of a substance?
- Its mass increases while its volume stays the same.
- Heating destroys some particles.
- Heating makes particles smaller.
- Its volume increases while its mass stays the same.
Answer and explanation
Answer: D
Heated particles move apart, so the same mass occupies more volume. Density = mass ÷ volume therefore decreases.