Chemistry

Practice questions

Nylon-2–nylon-6 is formed from

  1. glycine and aminocaproic acid
  2. 3-hydroxybutanoic acid and 3-hydroxypentanoic acid
  3. adipic acid and hexamethylenediamine
  4. caprolactam alone
Answer and explanation

Answer: A

Nylon-2–nylon-6 is a biodegradable polyamide of glycine and aminocaproic acid. 3-hydroxybutanoic and 3-hydroxypentanoic acids give PHBV, adipic acid and hexamethylenediamine give nylon-6,6, and caprolactam alone gives nylon-6.

Which set contains only amphoteric oxides?

  1. Al2O3, ZnO, BeO
  2. Na2O, MgO, BaO
  3. SO3, P4O10, Cl2O7
  4. CO, NO, N2O
Answer and explanation

Answer: A

Al2O3, ZnO and BeO react with both acids and bases. Na2O, MgO and BaO are basic, SO3, P4O10 and Cl2O7 acidic, and CO, NO and N2O neutral.

Which balanced equation shows the incomplete combustion of methane forming carbon monoxide?

  1. 2CH4 + 3O2 → 2CO + 4H2O
  2. CH4 + 2O2 → CO2 + 2H2O
  3. CH4 + O2 → CO + H2O
  4. 2CH4 + O2 → 2CO + 2H2O
Answer and explanation

Answer: A

Check atoms: left 2 C, 8 H, 6 O; right 2 C, 8 H, 2 + 4 = 6 O. Balanced. CH4 + 2O2 → CO2 + 2H2O is complete combustion; CH4 + O2 → CO + H2O and 2CH4 + O2 → 2CO + 2H2O do not balance.

3 kg of a fuel on complete combustion releases 1,35,000 kJ. Its calorific value is:

  1. 45,000 kJ/kg
  2. 4,05,000 kJ/kg
  3. 15,000 kJ/kg
  4. 40,500 kJ/kg
Answer and explanation

Answer: A

Calorific value = 1,35,000 ÷ 3 = 45,000 kJ/kg. Multiplying instead of dividing gives the wrong answer 4,05,000 kJ/kg.

What is the anode reaction of the lead storage battery on discharge?

  1. PbO2 + 4H+ + SO4 2- + 2e- gives PbSO4 + 2H2O
  2. 2H2O gives O2 + 4H+ + 4e-
  3. Pb2+ + 2e- gives Pb
  4. Pb + SO4 2- gives PbSO4 + 2e-
Answer and explanation

Answer: D

Lead is oxidised at the anode to PbSO4. PbO2 + 4H+ + SO4 2- + 2e- gives PbSO4 + 2H2O is the cathode reaction.

Which reaction temporarily ends a chlorine chain in the stratosphere?

  1. Cl + O₃ → ClO + O₂
  2. Cl + CH₄ → HCl + CH₃
  3. ClO + O → Cl + O₂
  4. CF₂Cl₂ → CF₂Cl + Cl
Answer and explanation

Answer: B

Forming HCl locks chlorine into a reservoir. Cl + O₃ → ClO + O₂ and ClO + O → Cl + O₂ are chain steps; CF₂Cl₂ → CF₂Cl + Cl starts a chain.

Mixing solutions of which pair gives a precipitate?

  1. NaCl and KNO3
  2. NaNO3 and KCl
  3. HCl and NaOH
  4. AgNO3 and KCl
Answer and explanation

Answer: D

AgNO3 + KCl → AgCl + KNO3; silver chloride is insoluble. With NaCl and KNO3, or NaNO3 and KCl, all possible products are soluble, and HCl with NaOH only forms water and soluble NaCl.

Which of these is a disproportionation reaction?

  1. 2H2O2 → 2H2O + O2
  2. NaOH + HCl → NaCl + H2O
  3. CaCO3 → CaO + CO2
  4. Zn + 2HCl → ZnCl2 + H2
Answer and explanation

Answer: A

In H2O2 oxygen is −1; it becomes −2 in H2O and 0 in O2, so the same element is both reduced and oxidised. NaOH + HCl and the decomposition of CaCO3 involve no change in oxidation number; Zn + 2HCl is redox between two different elements.

An effluent has COD 160 mg/L and BOD 120 mg/L. The BOD/COD ratio is:

  1. 0.75
  2. 1.33
  3. 0.25
  4. 0.50
Answer and explanation

Answer: A

120 ÷ 160 = 0.75, which means that most of the organic matter is biodegradable. The ratio cannot exceed 1.

The volume of 0.01 M EDTA needed by 50 mL of the same water (200 ppm) is:

  1. 5 mL
  2. 20 mL
  3. 2 mL
  4. 10 mL
Answer and explanation

Answer: D

Hardness in 50 mL = 10 mg CaCO3 = 0.10 mmol; EDTA volume = 0.10 ÷ 0.01 = 10 mL.

5000 L of the water (200 ppm total hardness) is softened by sodium zeolite. The salt needed to regenerate the bed is:

  1. 1.00 kg
  2. 1.17 kg
  3. 2.34 kg
  4. 0.585 kg
Answer and explanation

Answer: B

Hardness removed = 200 × 5000 = 1,000,000 mg = 1.0 kg as CaCO3; NaCl = 1.0 × 117 ÷ 100 = 1.17 kg.

For the same water, the pure soda needed per litre is:

  1. 53 mg
  2. 159 mg
  3. 106 mg
  4. 212 mg
Answer and explanation

Answer: C

Soda = 1.06 × (50 + 50) = 106 mg per litre.

For the water analysed above (temporary Ca 50, temporary Mg 50, permanent Ca 50, permanent Mg 50 ppm), the pure lime needed per litre is:

  1. 148 mg
  2. 74 mg
  3. 111 mg
  4. 200 mg
Answer and explanation

Answer: A

Lime = 0.74 × (50 + 2 × 50 + 50) = 0.74 × 200 = 148 mg per litre.

A water has total hardness 120 ppm and alkalinity 200 ppm (all HCO3−). Its non-carbonate hardness is:

  1. 0 ppm
  2. 80 ppm
  3. 120 ppm
  4. 200 ppm
Answer and explanation

Answer: A

Alkalinity exceeds hardness, so all of the hardness is carbonate hardness and the non-carbonate hardness is zero.

A 100 mL sample needs 5.0 mL of 0.02 N HCl to the phenolphthalein end point. P in ppm of CaCO3 is:

  1. 25 ppm
  2. 50 ppm
  3. 100 ppm
  4. 10 ppm
Answer and explanation

Answer: B

P = 5.0 × 0.02 × 50 × 1000 ÷ 100 = 50 ppm.

P = 90 ppm and M = 120 ppm. The hydroxide alkalinity is:

  1. 30 ppm
  2. 90 ppm
  3. 60 ppm
  4. 120 ppm
Answer and explanation

Answer: C

P > M/2, so OH− = 2P − M = 180 − 120 = 60 ppm.

P = 40 ppm and M = 200 ppm. The hydrogencarbonate alkalinity is:

  1. 160 ppm
  2. 120 ppm
  3. 80 ppm
  4. 40 ppm
Answer and explanation

Answer: B

P < M/2, so HCO3− = M − 2P = 200 − 80 = 120 ppm (and CO3 2− = 80 ppm).

A sample gives P = 0 and M = 160 ppm. The alkalinity is due to:

  1. Hydroxide only
  2. Carbonate only
  3. Hydrogencarbonate only
  4. Hydroxide and carbonate
Answer and explanation

Answer: C

With P = 0 there is no hydroxide or carbonate, so the whole alkalinity is hydrogencarbonate.

74 g of pure lime removes temporary calcium hardness equal to 100 g of CaCO3. In 500 L of water this corresponds to a hardness of:

  1. 50 ppm
  2. 100 ppm
  3. 400 ppm
  4. 200 ppm
Answer and explanation

Answer: D

100 g = 100,000 mg; 100,000 mg ÷ 500 L = 200 mg/L = 200 ppm.

At illustrative prices of ₹8 per kg of lime and ₹40 per kg of soda, 2.0 kg of lime and 1.0 kg of soda cost:

  1. ₹48
  2. ₹56
  3. ₹66
  4. ₹80
Answer and explanation

Answer: B

Lime 2.0 × 8 = ₹16; soda 1.0 × 40 = ₹40; total ₹56.

In the official syllabus of

Only syllabus lines checked against an official notification are counted.

Privacy · Terms · Refunds · Delivery