Minerals and Energy Resources

Practice questions

From lowest to highest carbon, the correct order is:

  1. Peat, lignite, bituminous, anthracite
  2. Anthracite, bituminous, lignite, peat
  3. Lignite, peat, anthracite, bituminous
  4. Bituminous, peat, lignite, anthracite
Answer and explanation

Answer: A

Carbon content rises from peat to lignite to bituminous coal to anthracite.

Which statement is true?

  1. Solar power works only at night
  2. Peat is the highest rank of coal
  3. Hydro power needs no water
  4. Bauxite is the ore of aluminium
Answer and explanation

Answer: D

Bauxite is the ore of aluminium. Solar works in daylight, peat is the first stage of coal, and hydro needs water.

Lignite is typically linked with:

  1. Neyveli
  2. Khetri
  3. Koderma
  4. Kolar
Answer and explanation

Answer: A

Neyveli in Tamil Nadu is known for lignite.

Which is correct about limestone?

  1. It is an igneous rock
  2. It is a source of aluminium
  3. It is used to make cement
  4. It is a fossil fuel
Answer and explanation

Answer: C

Limestone is a sedimentary rock and a raw material for cement.

Odd one out: copper, zinc, mica, lead.

  1. Copper
  2. Zinc
  3. Lead
  4. Mica
Answer and explanation

Answer: D

Copper, zinc and lead are metals; mica is non-metallic.

A village with many cattle and no gas supply could use:

  1. Geothermal power
  2. Biogas
  3. Tidal power
  4. Nuclear power
Answer and explanation

Answer: B

Dung from cattle is the raw material for biogas.

Which statement about hydroelectric power is correct?

  1. It needs no special site
  2. It burns coal at night
  3. It never depends on rain
  4. It needs falling water
Answer and explanation

Answer: D

Hydro power needs falling water, which means flowing water and a drop in height, and it depends on rain.

A village on a windy coast with no grid could best use:

  1. A thermal plant using imported coal
  2. A hydroelectric dam on a river
  3. A wind turbine
  4. A nuclear plant
Answer and explanation

Answer: C

A windy coast has a ready local resource, which wind turbines use.

Why do solar plants need storage if power is wanted at night?

  1. They need sunlight to work
  2. They burn fuel at night
  3. The wind stops at night
  4. Dams run dry at night
Answer and explanation

Answer: A

Solar cells make electricity only when light falls on them.

Which source is non-conventional but not renewable?

  1. Solar energy
  2. Nuclear energy
  3. Wind energy
  4. Hydroelectric power
Answer and explanation

Answer: B

Nuclear energy is counted as non-conventional but it uses uranium, which is not replaced.

At 5 rupees a unit (illustrative), 12 units cost:

  1. 17 rupees
  2. 50 rupees
  3. 60 rupees
  4. 120 rupees
Answer and explanation

Answer: C

12 x 5 = 60 rupees.

A 500 W machine runs for 4 hours. The units used are:

  1. 20
  2. 2
  3. 0.5
  4. 5
Answer and explanation

Answer: B

0.5 kW x 4 h = 2 kWh = 2 units.

A 40 MW plant runs for 6 hours. The energy generated is:

  1. 240 MWh
  2. 46 MWh
  3. 34 MWh
  4. 6.7 MWh
Answer and explanation

Answer: A

40 x 6 = 240 MWh.

A factory needs 90 kg of metal from an ore of grade 30 percent, with full recovery. The ore needed is:

  1. 27 kg
  2. 120 kg
  3. 270 kg
  4. 300 kg
Answer and explanation

Answer: D

90 / 0.30 = 300 kg.

An ore of grade 25 percent weighs 800 kg. At full recovery the metal is:

  1. 100 kg
  2. 200 kg
  3. 32 kg
  4. 320 kg
Answer and explanation

Answer: B

0.25 x 800 = 200 kg.

Aluminium is obtained from which ore?

  1. Bauxite
  2. Haematite
  3. Galena
  4. Chromite
Answer and explanation

Answer: A

Bauxite is the ore of aluminium.

Which of these is NOT an alloy?

  1. Mild steel
  2. Yellow brass
  3. Pure copper
  4. Tin bronze
Answer and explanation

Answer: C

Pure copper is a single metal. Steel, brass and bronze are alloys.

A bronze statue has a mass of 200 kg and is 90 percent copper. The mass of tin and other metal is:

  1. 10 kg
  2. 20 kg
  3. 180 kg
  4. 90 kg
Answer and explanation

Answer: B

Copper = 0.90 x 200 = 180 kg. The rest = 200 - 180 = 20 kg.

Which metal is used to coat iron sheets to prevent rusting?

  1. Copper
  2. Lead
  3. Gold
  4. Zinc
Answer and explanation

Answer: D

Zinc coating (galvanising) protects iron from rusting.

Brass is an alloy of copper with:

  1. Tin
  2. Zinc
  3. Lead
  4. Nickel
Answer and explanation

Answer: B

Brass is copper and zinc. Bronze is copper and tin.

Privacy · Terms · Refunds · Delivery