Chapter 4 Geometric Constructions

Practice questions

Tangents PA and PB are drawn from P to a circle of radius 6 cm, and the angle between them is 60°. How far is P from the centre?

  1. 6 cm
  2. 6√3 cm
  3. 12 cm
  4. 3 cm
Answer and explanation

Answer: C

OP bisects ∠APB, so ∠APO = 30°. In right △OAP, the side opposite 30° is OA = 6 cm and it is half the hypotenuse, so OP = 12 cm.

For which position of the point P can no tangent to the circle be drawn through P?

  1. P inside the circle
  2. P on the circle
  3. P outside the circle
  4. P at a distance equal to the diameter
Answer and explanation

Answer: A

Every line through an interior point cuts the circle in two points, so it is a secant; no tangent passes through it.

A circle has radius 3 cm and P is 5.5 cm from its centre. What is the length of each tangent from P (to one decimal place)?

  1. 2.5 cm
  2. 4.6 cm
  3. 6.3 cm
  4. 3 cm
Answer and explanation

Answer: B

PA = √(5.5² − 3²) = √(30.25 − 9) = √21.25 ≈ 4.6 cm.

A circle has a minor arc AB of 100°, and tangents are drawn at A and B. At what angle do they meet?

  1. 100°
  2. 50°
  3. 130°
  4. 80°
Answer and explanation

Answer: D

∠AOB = 100°, and the radii are perpendicular to the tangents, so the angle between the tangents is 360° − 90° − 90° − 100° = 80°.

In the construction of a tangent without the centre, △MAN and △RCD are shown congruent. By which test?

  1. SAS
  2. AA
  3. SSS
  4. ASA
Answer and explanation

Answer: C

AM = CR and AN = CD are equal radii, and RD was cut equal to MN, so all three sides match: SSS.

Which theorem allows the construction of a tangent without using the centre?

  1. Converse of the tangent-secant angle theorem
  2. Tangent segment theorem
  3. Theorem of touching circles
  4. Theorem of intersecting chords
Answer and explanation

Answer: A

A line through an end of a chord making with the chord an angle equal to the inscribed angle on the opposite arc is a tangent; that is the converse of the tangent-secant angle theorem.

Why is △A′BC′ similar to △ABC in the common-vertex construction?

  1. SSS test, since all sides are measured
  2. SAS test with the ratio of areas
  3. RHS test
  4. AA test: common angle B and equal corresponding angles from C′A′ ∥ CA
Answer and explanation

Answer: D

The angle at B is shared, and the parallel lines C′A′ and CA make equal corresponding angles at C′ and C, so the triangles are similar by AA.

In the common-vertex construction with AB : A′B = 2 : 3 and BC = 5 cm, how far from B is C′?

  1. 3.33 cm
  2. 7.5 cm
  3. 2.5 cm
  4. 10 cm
Answer and explanation

Answer: B

BC′ = BC × 3/2 = 5 × 1.5 = 7.5 cm, beyond C on ray BC because the new triangle is bigger.

To construct △A′BC′ ~ △ABC with AB : A′B = 7 : 4 on the common vertex B, BC is divided into how many equal parts, and where is C′?

  1. 4 parts, C′ at 7 parts
  2. 11 parts, C′ at 4 parts
  3. 7 parts, C′ at 4 parts
  4. 7 parts, C′ at 3 parts
Answer and explanation

Answer: C

BC′/BC = 4/7, so divide BC into 7 equal parts and place C′ at the end of the 4th part from B.

△ABC ~ △DEF with ∠B = 65°, AB = 4 cm and AB : DE = 2 : 3. Which data construct △DEF directly?

  1. DE = 6 cm, ∠E = 65°, EF = 1.5 × BC
  2. DE = 6 cm, ∠E = 97.5°, EF = BC
  3. DE = 2.67 cm, ∠E = 65°
  4. DE = 6 cm only
Answer and explanation

Answer: A

Sides are multiplied by 3/2: DE = 6 cm and EF = 1.5 × BC; angles stay the same, so ∠E = 65°. That is SAS data for △DEF.

△PYQ has PY = 6 cm, YQ = 7.5 cm and PQ = 5 cm. △XYZ ~ △PYQ with YZ : YQ = 6 : 5. What is XY?

  1. 5 cm
  2. 9 cm
  3. 6 cm
  4. 7.2 cm
Answer and explanation

Answer: D

Every side of △XYZ is 6/5 of the corresponding side of △PYQ. XY corresponds to PY, so XY = 6 × 6/5 = 7.2 cm (and YZ = 9 cm, XZ = 6 cm).

△ABC ~ △LBN with AC = 5.2 cm and AC : LN = 4 : 5. What is LN?

  1. 4.16 cm
  2. 6.5 cm
  3. 5 cm
  4. 9.1 cm
Answer and explanation

Answer: B

LN = AC × 5/4 = 5.2 × 5/4 = 6.5 cm. Since 5 > 4, △LBN is bigger.

Which basic construction is used to find the midpoint of OP when drawing tangents from P?

  1. Copying an angle
  2. Dividing in the ratio 1 : 2
  3. Drawing a parallel line
  4. The perpendicular bisector of OP
Answer and explanation

Answer: D

The perpendicular bisector of OP passes through its midpoint M, which is the centre of the circle on diameter OP.

A segment of 12 cm is divided in the ratio 5 : 3. What is the longer part?

  1. 4.5 cm
  2. 7.5 cm
  3. 7.2 cm
  4. 5 cm
Answer and explanation

Answer: B

5 + 3 = 8 parts of 1.5 cm each. The longer part is 5 × 1.5 = 7.5 cm and the shorter is 4.5 cm.

To divide a segment in the ratio 2 : 5, through which mark is the parallel line drawn?

  1. The 2nd of 7 marks
  2. The 5th of 7 marks
  3. The 2nd of 5 marks
  4. The 7th mark
Answer and explanation

Answer: A

Mark 2 + 5 = 7 equal steps, join the 7th mark to the end of the segment, and draw the parallel through the 2nd mark to cut off 2 parts out of 7.

P is at a distance equal to the diameter from the centre O of a circle. What is the angle between the two tangents from P?

  1. 30°
  2. 90°
  3. 60°
  4. 45°
Answer and explanation

Answer: C

OP = 2r, so in right △OAP the side OA is half the hypotenuse OP and ∠APO = 30°. By symmetry ∠BPO = 30°, so ∠APB = 60°.

A circle has radius 3.6 cm and P is 6.5 cm from the centre. What is the length of each tangent from P (to two decimal places)?

  1. 5.41 cm
  2. 2.9 cm
  3. 7.43 cm
  4. 10.1 cm
Answer and explanation

Answer: A

PA = √(6.5² − 3.6²) = √(42.25 − 12.96) = √29.29 ≈ 5.41 cm.

Why is ∠OAP = 90° in this construction?

  1. Because OA is a radius
  2. Because PA = PB
  3. Because O is the centre of both circles
  4. Because ∠OAP is inscribed in a semicircle of the circle on diameter OP
Answer and explanation

Answer: D

A lies on the circle with diameter OP, and an angle inscribed in a semicircle is a right angle, so ∠OAP = 90°.

In constructing tangents from P to a circle with centre O, which circle is drawn after finding the midpoint M of OP?

  1. A circle with centre P and radius PO
  2. A circle with centre O and radius OP
  3. A circle with centre M and radius MO
  4. A circle with centre M and radius equal to the given radius
Answer and explanation

Answer: C

The circle with centre M and radius MO has OP as a diameter. Its intersections with the given circle are the points of contact.

What is the maximum number of tangents that can be drawn to a circle from a point outside it?

  1. 1
  2. 2
  3. 3
  4. Infinitely many
Answer and explanation

Answer: B

From an external point exactly two tangents can be drawn, touching the circle at the two points where the circle on OP as diameter meets it.

Privacy · Terms · Refunds · Delivery